Atlantic Ultraviolet Sanidyne PLUS+ User manual

1
Document No. 98-1614D1 • April 2021 • ©2021 Atlantic Ultraviolet Corporation®
Model G48HO Remote
Controlled Sanitizer
Owner’
s Manual
Owner’
s Manual
Installation,
Operation &
Maintenance
Read and Follow All
Safety Instructions.
Save These Instructions.
UV
Ultraviolet
Radiation
Protect eyes and
skin from direct and
reflected radiation.
DANGER
!
Manufacturers / Engineers / Sales / Service
Germicidal Ultraviolet – Equipment & Lamps
375 Marcus Boulevard • Hauppauge, NY 11788
[phone] • Fax: [phone]
Email: [e-mail]
Ultraviolet.com • BuyUltraviolet.com
Extensive Product Information Available at:
Ultraviolet.com
BuyUltraviolet.com

2
TABLE OF CONTENTS
SAFETY WARNINGS .......................................................................................................................................................................3
SAFETY INSTRUCTIONS .............................................................................................................................................................. 3
Safety LabeLS ................................................................................................................................................................................4
Caution...........................................................................................................................................................................................4
PRODUCT APPLICATIONS ........................................................................................................................................................... 5
ConStruCtion..................................................................................................................................................................................5
PrinCiPLe of oPeration ...................................................................................................................................................................5
LimitationS......................................................................................................................................................................................5
UNPACKING .....................................................................................................................................................................................6
INSTALLATION ...............................................................................................................................................................................6
DimenSionaL Data........................................................................................................................................................................... 6
rear View of unit .........................................................................................................................................................................7
KeyPaD ControLLer oVerView .......................................................................................................................................................7
HanD-HeLD remote ControLLer oVerView .................................................................................................................................8-9
LamP inStaLLation .....................................................................................................................................................................9-10
unit PLaCement ............................................................................................................................................................................10
UNIT OPERATION.........................................................................................................................................................................10
Pre-oPeration ..............................................................................................................................................................................10
Sanidyne®Plus oPeration ....................................................................................................................................................... 11
uSing tHe KeyPaD ControLLer to Set treatment timeS ............................................................................................................. 11
uSing tHe HanD-HeLD remote ControLLer to Set treatment timeS......................................................................................11-12
Settting Date anD time ...............................................................................................................................................................12
SaVing aSeSSion ...........................................................................................................................................................................12
Determining treatment time for room SizeS .............................................................................................................................13
MAINTENANCE............................................................................................................................................................................. 14
maintenanCe oVerView ................................................................................................................................................................ 14
germiCiDaL LamP inStaLLation, rePLaCement, or CLeaning........................................................................................................14
LamP breaKage ............................................................................................................................................................................14
DiSPoSaL of merCury aDDeD LamP ..............................................................................................................................................14
TROUBLESHOOTING ..................................................................................................................................................................15
TECHNICAL SPECIFICATIONS.................................................................................................................................................15
OPTIONAL ACCESSORIES .........................................................................................................................................................16
REPLACEMENT PARTS...............................................................................................................................................................16
MAINTENANCE LOG..............................................................................................................................................................17-19
USER ASSISTANCE ....................................................................................................................................................................... 20
Patent notiCe...............................................................................................................................................................................20
WARRANTY & PRODUCT REGISTRATION ...........................................................................................................................20
These instructions generally describe the installation, operation and maintenance of the Sanidyne®Plus Portable Area
Sanitizer. Questions that are not specically answerable by these instructions should be directed to the factory. Atlantic
Ultraviolet Corporation® takes all possible precautions when packaging equipment to prevent damage. Carefully inspect
and report all damages. Do not install damaged equipment. Follow all instructions on any labels or tags. Carefully inspect
all packing materials before discarding to prevent the loss of accessories, mounting hardware, spare parts or instructions.
The information and recommendations contained in this publication are based upon data collected by the
Atlantic Ultraviolet Corporation® and are believed to be correct. However, no guarantee or warranty of any kind,
expressed or implied, is made with respect to the information contained herein. Specications and information
are subject to change without notice.

3
SAFETY INSTRUCTIONS
To guard against injury, basic safety precautions should be observed, including the following:
1. Read and follow ALL safety instructions.
2. Avoid exposure to direct or reected germicidal ultraviolet rays. Germicidal
ultraviolet rays are harmful to the eyes and skin.
3. Intended for indoor use only.
4. Do not alter design or construction.
5. Do not use this sanitizer for other than its intended purpose, as described in this manual.
6. Do not use this sanitizer in occupied areas. The supplied “DANGER - DO NOT ENTER…” sign(s) MUST be clearly
displayed to warn against entering the area during the disinfection cycle without proper personal protection equipment.
7. Germicidal ultraviolet rays may break down plastic, rubber or other non-metallic materials, with
inadequate resistance to ultraviolet. Shield all plastic, rubber or other non-metallic parts which may be exposed to direct or
reected germicidal ultraviolet rays.
8. Do not remove any labels.
9. Do not operate without proper electrical ground.
10. Do not operate the sanitizer if the power cord and/or plug are damaged, or if any other damage to the sanitizer is
visible or suspected.
11. Utility power supplied to the sanitizer, MUST match power requirements listed on the sanitizer label.
12. Always disconnect power to the xture before performing any service or maintenance.
13. Read and follow all notices and warnings on the sanitizer.
14. SAVE THESE INSTRUCTIONS.
SAFETY WARNINGS
• All personnel should be alerted to the potential hazards indicated by the product safety labeling on this unit.
• The following conventions are used to indicate and classify precautions in this manual and on product safety labeling. Failure to
observe precautions could result in injury to people or damage to property.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This symbol is used to identify the need to wear
protective gloves.
Caution indicates a POTENTIALLY
hazardous situation, which, if not avoided,
MAY result in minor or moderate injury.
Caution used without the safety alert symbol
indicates a potentially hazardous situation, which,
if not avoided, may result in property damage.
Warning indicates a POTENTIALLY
hazardous situation, which, if not avoided,
COULD result in death or serious injury.
This symbol is used to identify an
ULTRAVIOLET LIGHT hazard.
This symbol is used to identify an ELECTRICAL
SHOCK or ELECTROCUTION hazard.
This symbol is used to identify the need to wear
approved ultraviolet blocking eyewear.
This symbol is used to identify the need to wear approved
ultraviolet blocking face shield.
This symbol is used to identify components which must
not be disposed of in trash
Danger indicates an IMMINENTLY
hazardous situation, which, if not avoided,
WILL result in death or serious injury.

4
SAFETY LABELS
Danger Label: Ultraviolet Radiation (70-0052)
Hg-Lamp Contains Mercury Label (70-0011)
DANGER
!
UV
Ultraviolet
Radiation
Protect eyes and
skin from direct and
reflected radiation.
Part No. 00-0358
Danger: UV 5”x5” PMS109, PMS185/ out dr & Bk White Mylar UV Varnish
00-0358
Danger Label: Ultraviolet Radiation (00-0358)
Danger Label: Hazardous Voltage /
Ultraviolet Radiation (70-0036)
Warning Germicidal UV Label (70-0037)
CAUTION
It is the user’s responsibility to determine and validate the suitability of this equipment for use in the user’s system or
process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use. The user should periodically inspect, clean as necessary and
conrm the presence and good legibility of the product safety labels. Contact the factory for replacement labels in the event
that any of the labels are missing or illegible.
Location of Danger Labels (70-0036,
70-0037, and 70-0011) on Back of Unit
Location of Danger Labels (70-0052) on Top of Unit
Location of Danger Labels (00-0358) on Both Sides of Unit

5
PRODUCT APPLICATIONS
ConstruCtion
The Sanidyne®Plus Germicidal Ultraviolet Portable Area Sanitizer consists of:
• STER-L-RAY ®High Output Germicidal Ultraviolet Lamps: Deliver ultraviolet energy at the specic wavelength of 254
nanometers (nm). This wavelength is highly effective against microbes including virus, bacteria and mold spores. Germicidal
ultraviolet rays are harmful to eyes and skin, avoid exposure of direct or reected germicidal ultraviolet rays without approved
ultraviolet blocking face shield and protective covering (such as gloves, long sleeves with no gaps between cuff and gloves).
• Audible Exit Warning Alarm: To alert area that the lamps will be powered on in one minute and thirty seconds after the start
button is pressed or to indicate intruder is in Operation Area.
• Elapsed Time Indicator: A non-resettable display of the operating hours. Useful for scheduling and recording maintenance
and lamp replacement.
• Hand-Held Remote Controller: Provides easy operation of Sanidyne®Plus from a safe distance, displays lamp operation,
controls treatment times and alerts operator with an audible alarm if an intruder enters Operation Area.
• Keypad Controller: Provides easy operation of Sanidyne®Plus and allows the operator a period of time (one minute and
thirty seconds) to leave the Operation Area before treatment begins.
• Intruder Sensors: Delay treatment if the Operation Area is inhabited. Additionally if sensors detect an intruder with less than
30 seconds left before lamps operate, the countdown time will automatically restore back to 30 seconds until area is cleared.
• Four Wheels with Locking Casters: Make moving Sanidyne®Plus easily accomplished for location changes.
• Power Cord: For 120v AC 50/60Hz single-phase standard household current, a NEMA 5-15, three-prong plug is provided for
a properly grounded outlet. 230v AC 50/60Hz models use a CEE 7/7 (Schuko type) plug. (Consult factory for other plug types).
• Stainless Steel Lamp Guard Assembly: Protects lamps from damage during normal operation.
• Stainless Steel Construction: All electronics and wiring are housed in an enclosure constructed of stainless steel, providing
strength and durability in order to withstand most harsh environments.
• Sanidyne®Plus will operate between 120v 50/60Hz and 250v 50/60Hz.
PrinCiPle of oPeration
The Sanidyne®Plus design has been carefully conceived to provide direct germicidal ultraviolet exposure for air and surface
disinfection in unoccupied areas to disinfect and prevent areas and surfaces from microorganisms. The ultraviolet disinfection
dosage is a function of time and the intensity, of the ultraviolet radiation to which the air and surrounding surfaces are exposed.
NOTE: The Sanidyne®Plus should be used as a supplement to your facility’s cleaning and disinfection protocols, not as a
replacement. Follow your facility’s cleaning and disinfection protocols before using the Sanidyne®Plus.
No special room preparation is required prior to treating a room or area with the Sanidyne®Plus — however, target
surfaces must be directly exposed to the UV rays. These rays will not penetrate materials like cloth, paper or ordinary glass,
therefore, it is important to remove items from the direct line of sight that would block or shield the rays from other surfaces.
The Sanidyne®Plus does not generate any harmful byproducts, nor does it leave any residual substances.
It is the user’s responsibility to determine and validate the suitability of the equipment for use in system
or process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use.
Indoor Use Only – The equipment must be sheltered from exposure to the elements and extremes in
temperature. Temperature range: 40 °F to 95 °F. The user should periodically inspect, clean as necessary and conrm the
presence and good legibility of the Product safety labels. Contact the factory for replacement labels in the event that any of
the labeling is missing or illegible.
The UV Treatment Results achieved are subject to variations in application conditions, it is recommended
that culture tests be performed to conrm desired outcomes.
limitations
• Safety procedures MUST be implemented to prevent ultraviolet exposure of occupants to direct or reected ultraviolet rays.
Exposure to germicidal ultraviolet rays will result in the irritation of the eyes and reddening of the skin.
• Personal protection equipment is required when entering the irradiated space with the germicidal lamp(s)
operating. Personal protection equipment includes skin and eye protection such as gloves, long sleeves
with no gaps between cuff and gloves, and an ultraviolet blocking face shield (included with the purchase
of the Sanidyne®Plus).

6
UNPACKING
IN ORDER TO PERFORM THIS TASK, BE SURE TO WEAR THE FOLLOWING SAFETY
EQUIPMENT: SAFETY GLASSES OR A FACE SHIELD, AS WELL AS GLOVES
• Remove the Sanidyne®Plus from its shipping carton.
• Atlantic Ultraviolet Corporation® takes all possible precautions when packaging this xture to prevent damage. Carefully
inspect the unit, power cord and plug for damage, report all damage immediately. Do not assemble or operate if there is any
damage, visible or suspected.
• STER-L-RAY ®Germicidal Ultraviolet Lamps are packed separately, to ensure maximum protection. Keep the lamps aside
until ready for installation.
• Carefully inspect all packing materials to prevent the loss of accessories, spare parts or instructions.
• Do not discard packing materials until Sanidyne®Plus is assembled, checked and conrmed.
The Sanidyne®Plus Portable Area Sanitizer includes:
• 1 - Eight-lamp xture with power cord - Includes a microprocessor controller with time display and push button controls
• 1 - Hand-Held Remote Controller
• 8 - STER-L-RAY ®High Output Germicidal Ultraviolet Lamps (05-0893) with ArmorLite™Protective Coating
• 2 - Promate™ Ultraviolet Blocking Face Shields with Adjustable Headgear
• 1 - Owner’s Manual
• 4 - Promate™ Danger Signs (98-1827)
• 1 - UV-C Dosimeter Card (00-0373 – See “Optional Accessories” on Page 16 for more information.)
INSTALLATION
Figure 1 – Dimensional Data
All specications, dimensional data, etc are approximate and subject to change without notice.

7
KeyPad Controller overview
Figure 3 – Keypad Controller Overview
1. Treatment Time: Displays chosen treatment time which will countdown after start is selected. Flashes with word “PrEP”
during Countdown Time, the word “run” during Treatment Time and “donE” when Treatment Time is completed.
2. Hour Buttons: Up and down buttons are used to select treatment hours between 0 and 24.
3. Minute Buttons: Up and down buttons are used to select treatment minutes between 0 and 59.
4. Start / Stop Button: Begins treatment time countdown, also used to restart unit after an intruder is sensed in Operating Area.
5. Power Indicator: Glows RED when power is applied to unit and will ash during Treatment Time. Flashes rapidly if
occupancy sensor is tripped
TREATMENT TIME
POWERMINUTESHOURS
START
STOP
Treatment Time
Displays HOURS: MINUTES
1
Hours Button
Up and Down Arrows set
time from 0 to 24 Hours
2
Power Indicator
Glows RED when power
is applied, flashes during
Treatment Time
Start /Stop Button
Used to begin Treatment Time
and Restart unit after Alarm
4
Minutes Button
Up and Down Arrows set
time from 0 to 59 Minutes
3
5
Figure 2 – Rear View of Unit

8
Hand-Held remote Controller overview
Figure 4 – Hand-held Remote Controller Overview
General Rule of Selection: Except for the ON/OFF button located on the right side of the Hand-held Remote Controller, all
selections made to this device will require a gentle touch of a short period of time to achieve a response.
1. Charging Port: Charge Hand-held Remote Controller using supplied AC Adapter.
2. Treatment Time: Set treatment time in Hours, Minutes. Hold nger on Treatment Time to select until menu changes
to scroll bar. Scroll the numbers up or down, positioning the times chosen in the center row. When times are positioned
correctly, select DONE on the screen to input your Treatment Time choice.
3. Current Time:Displays current time in Hours, Minutes, Seconds. Can be reset under SETTINGS, however this requires a
PIN Number to do this. (See “Setting Date and Time” on Page 12)
4. Lamp Operation Indicators: Lamp status glows yellow when the lamps are operating correctly. If lamp is not operating the
lamp status will be displayed grey for that lamp.
5. Start Button: Starts treatment cycle time.
Once selected:
a) Remaining Time changes to Countdown Time and begins counting down from 1 minute and 30 seconds to exit area
b) The words “LEAVE AREA” appear on the lower status bar.
c) Alarm on unit begins to sound
d) The word “PrEP” ashes on the Keypad during the Countdown Time, when Treatment Time begins the word “run”
ashes and when the treatment time is completed the word “donE” will appear.
6. Return Button: Brings you back to previous screen (Remote Overview Continued on Page 9)
Lamp operation indicators
illuminate yellow when
lamps are on
Displays current time
Hours : Minutes : Seconds
Used to define treatment
time in Hours :Minutes
Start Button
Return Button
Pause / Continue Button
Settings Button
LampControl
Treatment Time
00:00:00 00:00:00
00000:0011:57:14
Current Time
Start Pause Stop
Remaining Time
Total Op Time
Connecting to SANIDYNE
Lamp Status
2 3 4 5 6 7 81
90%
Displays Remaining Time and
toggles to Countdown Time shown on
Cycle Time Hours : Minutes : Seconds
Begins at (1:29)minutes when pressed
Displays accumulative hours
of all treatment times
Stop or End Button
Status Bar:
• Ready
• Intruder Alert
• Session in Progress
• Session Paused
• Session Resumed
• Session Stopped
• Leave Area
• Connected to SANIDYNE
Treatment Time
Set lamp cycle time hours and minutes
Done
00
01
02
59
00
01
:
Power off Reboot Airplane mode
Airplane mode is OFF
Airplane mode is ON
!
Volume Button
On / Off Button
Home Button
Battery Condition
Charging Port
11
14
15
12
16
8
9
1
10
2
3
4
5
6
7
13

9
7. Pause / Continue Button: Used to pause the treatment time, or to continue the treatment time. This button toggles from the
Pause Icon, which is displayed as two vertical bars to the Continue Icon which is a looping arrow. If pause is selected below
30 seconds during the Countdown, the Countdown time will reset to 30 seconds. If pause is selected during the cycle time the
device will provide an additional 1 minute and 30 seconds of countdown time to leave the area.
8. Home Button: Exit LampControl app.
9. Battery Condition: Displays the charge level of the battery in the hand-held remote. Press on battery symbol to see
percent of change.
10. Settings Button: Contains choices for:
a) Settings: Reset Operating Time or Clear Session Data
b) Set Date/Time: If changing through this menu, you need a PIN (See “Setting Date and Time” on Page 12).
c) Sessions: Log of saved sessions
11. Remaining Time: Displays remaining time of treatment and toggles to (Countdown time shown on Treatment in Hours,
Minutes, Seconds) when selected.
12. Volume Button: Adjust volume on Hand-held Remote Controller.
13. ON/OFF Button: Turns the power to the device on or off and can be used to restart the device. To turn on the device, this
button must be pushed in and held for 2 seconds. If the device is on the Home screen, pressing and holding this button
will bring up a menu with choices to: Power Off / Reboot / Airplane Mode; ON – OFF (MUST BE SET TO ON AT ALL
TIMES). Additionally displays three icons at bottom which are Sound Off / Vibrate / Sound On.
14. Total Operation Time:Displays accumulative hours of all treatment times.
15. Stop or End Button: Stop treatment time.
16. Status Bar: Outputs all the conditions of the device
a) Ready
b) Intruder Alert
c) Session in Progress
d) Session Paused
e) Session Resumed
f) Session Stopped
g) Leave Area
h) Connected to Sanidyne®
lamP installation
Always disconnect power to the xture before performing any service or maintenance.
Germicidal lamps are easily damaged. Exercise care when handling lamps.
Step 1 –Remove Top Cover by
removing all hardware and place on
the side to be reinstalled later.
Step 2 –One end of lamp is marked
“INSTALL THIS END DOWN.”
Carefully t this end of the lamp into
the lamp guard assembly rst, as shown.
Step 3 –Carefully align pins on
lamp base to socket holes on
lampholder as shown. (Lamp
Installation Continued on Page 10.)

10
unit PlaCement
• The Sanidyne®Plus is intended for indoor use only. The Sanidyne®Plus should be protected from liquid intrusion such
as dripping water, condensation or mist, and used only in a clean, dry location with temperature ranges between 40 °F to 95 °F.
• Electrical power supplied to the Sanidyne®Plus must match power requirements listed on the Sanidyne®Plus.
• The Sanidyne®Plus is intended for use in UNOCCUPIED AREAS ONLY. Under no circumstances
should this sanitizer be permitted to operate with humans, plants, or animals present in the Operation Area.
• The intrusion sensors will detect movement if anyone is in the treatment area and the lamps will be switched off until xture is
reset by pressing the START/STOP button on keypad on the top of the Sanidyne®Plus.
• For maximum efciency the Sanidyne®Plus should be located as centrally as possible, away from the corners of the
treatment area. The Sanidyne®Plus Portable Area Sanitizer is most effective when it is located in the vertical center of the
room and the ultraviolet rays are unobstructed.
UNIT OPERATION
Pre-oPeration
1. Fully charge the Hand-held Remote Controller (Shown in Figure 4). NOTE: Charger provided operates on 100 volt to 240
volts 50/60Hz and has a NEMA 1-15 plug.
2. Once a location has been chosen for the Sanidyne®Plus post Laminated Warning Signs supplied with the Sanidyne®
Plus on all access doors to the area where treatment operation will take place.
It is the users responsibility to post signs, or notices for all personnel and persons in the building or facility
so that they be made aware that the Operation Area is off limits during treatment.
3. Connect the Sanidyne®Plus to a properly grounded outlet power source which matches the power requirements listed
on the Sanidyne®Plus (See Power In location shown on Figure 2- Rear View of Unit)
Approved Promate™ Face Shields (2), are supplied with each unit. Promate™ Face Shield MUST be
worn prior to the next step by the operator as well as anyone else in the operation area. In addition the
operator and anyone present MUST use protective gloves and clothing to protect skin from UV rays.
4. Turn power on using the Power Switch located on the rear of the Sanidyne®Plus (See Power Switch location shown on
Figure 2 – Rear View of Unit). Switch will glow RED when power is on. Once xture receives power, the RED lights
located just below the Occupancy Sensors on the top of the xture will glow RED. (See Occupancy Sensors (4-Total), shown
on Figure 1 – Dimensional Data). This is not a warning, it indicates that the sensors are aware of your presence.
Step 4 –Using the lamp, apply
slight pressure to compress the lower
lampholder, and then pivot the lamp so
it aligns with the top lamp socket. Lamp
should appear straight when it is correctly
in place. Conrm pins are inserted and
that both ends align. As shown above,
adjust each lamp socket if there is any gap
between the lamp base and lamp socket.
Step 5 –Repeat until all lamps
have been installed.
Step 6 –Once complete, reinstall
Top Cover.