Atlantic Ultraviolet Sanidyne PREMIUM User manual

User’s Guide
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
This User’s Guide MUST be utilized in conjunction
with the Sanidyne® Owner’s Manual for Installation,
Operation & Maintenance for your specific model.
98-1724
98-1614
98-1709 98-1692

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
READ Owner’s Manual for Installation,
Operation & Maintenance. Read and
Follow ALL Safety Instructions.
Additional Copies of the Manual are Available
on Ultraviolet.com & BuyUltraviolet.com.
Contact a UV Application Specialist
with Any Questions.

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
PREMIUM
480 UV Watts
PLUS
312 UV Watts
PRIME REMOTE
143 UV Watts
PRIME
143 UV Watts
PRIME Pictured
with & without
Protective Cover

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
Sanidyne® is for use ONLY
in UNOCCUPIED Areas.

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
Operators MUST Post the Provided Safety
Signs and Labels When Sanidyne® is in use.
Contact a UV Application Specialist for Additional Signs or Labels

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
Read and Understand Safety
Warnings and Instructions
Contact a UV Application Specialist
With Any Questions
See Page 3 of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
Inspect all Safety Warning Labels
It is the user’s responsibility to inspect
and confirm the presence and good
legibility of the product safety labels.
Contact a UV Application Specialist for
replacement labels if needed.
See Page 4 (Page 4-5 for Prime Model)
of your Owner’s Manual for Labels and
Label Locations.

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
Safety procedures MUST be
implemented to prevent ultraviolet
exposure of occupants to direct or
reflected ultraviolet rays.
See Page 5 (Page 6 for the Prime Model) for
Construction, Principal of Operation, and Limitations.
Exposure to germicidal ultraviolet rays will result in
the irritation of the eyes and reddening of the skin.

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
Personal Protection Equipment
is REQUIRED when entering
the irradiated space with the
germicidal lamps operating.
Personal protection equipment includes skin and eye
protection such as gloves, long sleeves with NO GAPS
between cuff and gloves, and an ultraviolet blocking
face shield (included with the purchase of the
Sanidyne®).

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNPACKING –In Order to Perform
this Task, be Sure to Wear the
Following Safety Equipment:
Safety Glasses or a Face Shield,
as well as Gloves.
See Page 6 (Page 7 for the Prime Manual)
of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT PLACEMENT
The Sanidyne® is intended for use in
UNOCCUPIED AREAS ONLY
. Under no
circumstances, should this sanitizer be
permitted to operate with humans, plants,
or animals present in the Operation Area.
See Page 10 (Page 8 for the Prime Model)
of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT PLACEMENT
The Sanidyne® is intended for INDOOR use
only. The Sanidyne® should be protected
from liquid intrusion such as dripping
water, condensation, or mist, and used
only in a clean, dry location with
temperature ranges between 40°F to 95°F.
See Page 10 (Page 8 for the Prime Model)
of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
LAMP INSTALLATION –In Order
to Perform this Task, be Sure to
Wear the Following Safety
Equipment: Safety Glasses or a
Face Shield, as well as Gloves.
See Page 9 (Page 8 for the
Prime Model) of your
Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
LAMP INSTALLATION
[!CAUTION] Germicidal lamps
are easily damaged. Exercise
care when handling lamps.
[!WARNING] Always disconnect
power to the Sanidyne® before
performing any service or
maintenance
See Page 9 (Page 8 for the Prime Model)
of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT PLACEMENT
Electrical power supplied to the
Sanidyne® must match power
requirements listed on the Sanidyne®.
See Page 10 (Page 8 for the Prime Model)
of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT PLACEMENT
For maximum efficiency, the Sanidyne® should be
located as centrally as possible, away from the
corners of the treatment area. It is most effective
when located in the center of the room and the
ultraviolet rays are unobstructed.
See Page 10 (Page 8 for the Prime Model) of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT PLACEMENT
For areas where ultraviolet
rays are obstructed, multiple
treatments in other locations
in the area are required.
See Page 10 (Page 8 for the Prime Model) of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT PLACEMENT
Access to the room
MUST be avoided
while the Sanidyne®
is operating.
See Page 10 (Page 8
for the Prime Model)
of your Owner’s Manual

User’s Guide -Safety First
[e-mail] –631-273-0500 –Ultraviolet.com –BuyUltraviolet.com
UNIT OPERATION
All Models have a Keypad Controller, 24-
Hour Interval Timer, a 1-Minute and 30
Second Audible Exit Warning.
The Prime Remote, Plus and Premium have
Occupancy Sensors and a Remote Control.
See Page 11-12 (Page 9-10 for the Prime Model)
of your Owner’s Manual