Atlantic Radiant panel heater - Horizontal and... User manual

TATOU DIGITAL
PANNEAU RAYONNANT VERSIONS HORIZONTALES ET VERTICALES
Radiant panel heater - Horizontal and vertical
Warmtestraalradiator - Horizontale en verticale modellen
Emisor radiante - Versiones horizontales y verticales
Emissor radiante - Versões horizontais e verticais
Promiennik elektryczny - wersja POZIOMA i PIONOWA
F
SP
NL
PL
GB
P
RU
NOTICE D’UTILISATION ET D’INSTALLATION
Installation and operating manual - Gebruiks- en installatiehandleiding - Manual de utilización e instalación - Manual do Usuario
e da Instalação - Instrukcja obs ł ugi i monta
ż u -
GUIDE À CONSERVER
PAR L’UTILISATEUR
Manual must be kept by end user
Gids te bewaren door de gebruiker
Guía que deberá ser conservada por el usuario
Guia a conservar pelo usuario

27
Contents
Warning...........................................................................................................................................28
Installation
Preparing the installation of the device........................................................................................29
Unlocking the device’s hanging frame...........................................................................................30
ixing the hanging frame to the wall.............................................................................................30
Connecting the device......................................................................................................................31
Locking the device on the hanging frame....................................................................................32
Operation.......................................................................................................................................33
Use
Turning on your device ....................................................................................................................34
Putting your device in standby mode ..........................................................................................34
Choosing your heating mode ........................................................................................................35
Heating your room: how to use Comfort mode .....................................................................36
Lowering the temperature of your room: how to use Eco mode ........................................37
Programming the heating period: how to use Programming mode...........................38 to 42
Absence of more than 24 hours: use the rost Protection mode .......................................43
How to use the energy-saving functions..........................................................................44 to 48
Locking the controls.........................................................................................................................49
Locking the control panel ..............................................................................................................49
Calibrate the temperature ..............................................................................................................50
Maintenance .......................................................................................................................................50
Returning to the standard factory settings .................................................................................50
Troubleshooting .................................................................................................................................51
Warranty conditions.........................................................................................................................53
GB

28
The device you have just purchased was submitted to many tests and checks ensuring its quality.
We thank you for your choice ant trust. We hope you will be fully satisfied.
he references for your device
These are located on the right-hand side of the device.
The commercial code and the serial number identify for the manufacturer the particular device you
have bought.
Devices with this symbol must not be scrapped with normal household rubbish but be col-
lected separately and recycled.
When these products come to the end of their useful life, they must be collected and recy-
cled in accordance with the local regulations and bylaws.
- Please ensure that children do not lean on the device or play close to it when it is operating : its
surface may be hot enough to cause burns to their skin in some circumstances, particularly becau-
se their reflexes may not yet have been acquired or aur slower than those of an adult. If there is any
risk, fit a protective grill in front of the device.
-
This device is not intended for use by persons (including children) with physical, sensory or mental
disability, or by persons lacking experience or knowledge, unless they have received from a person
in charge of their safety adequate supervision or preliminary instructions on how to use the device.
- Care must be taken at all times to keep children from playing with the device.
- Do not obstruct the grills, even partially (either on the front of the device or underneath it): other-
wise the device may overheat.
- If the supply cord is damaged, it must be replaced by a service agentor similarly qualified person in
order to avoid a hazard (applies to units fitted with a supply cord and plug).
- Units fitted with a three core supply cord (brown, blue and black), must be directly connected to hard
wiring by a licensed electrician.
- All work on the interior of the device must be carried out by a licensed electrician.
AStandards, quality labels
BCommercial name
CCommercial code
DManufacturing reference
ESerial number
Manufacturer’s number
Please keep this instruction manual even after installing your device.
Warning

29
We strongly advise against installing vertical machines above an altitude of 1000m
(risk of faulty operation).
Installing a machine at altitude causes an increase in air output temperature
(of the order of 10°C per 1000m above sea level).
It is forbidden to install a vertical machine horizontally or vice versa.
Do not use the device in mobile, on feets or on casters.
Installation
Installation guidelines
- This device was designed to be installed in residential premises. In any other case, please call your
distributor.
- Installation must comply with the standards currently enforced in the country of use.
- The device must be supplied with 230V single-phase 50Hz.
- In damp areas such as bathrooms and kitchens, you must install the connection box at least 25cm above
the floor.
Keep the device away from any draughts that may interfere with its operation (e.g.:
under a centrally controlled fan, etc ...).
Do not install the heater under a fixed socket.
The device is fitted with a detection system, whose sensor is located on the front of the device.
PREPARING HE INS ALLA ION OF HE DEVICE
50 cm
15 cm
Comply with the minimum distances from
any furniture units when positioning the
device.
To optimise absence detection by your device, do not
install it in a closed off corner or behind furniture.
Volume 1 No electrical device
Volume 2 Class II IPX24 electrical device
Volume 3 Class II electrical device
GB

30
We recommend that you place the device face down on the floor, taking care to protect its front
surface from scratches.
UNLOCKING HE DEVICE’S HANGING FRAME
FIXING HE HANGING FRAME O HE WALL
Take a flat-
bladed screw-
driver and lift
the slider, taking
care not to
bend it.
While keeping the slider
raised, push the hanging
frame towards the bottom
of the heater to release the
upper brackets S2. We rec-
ommend that you wear
protective gloves.
Swivel the hanging
frame downwards on
the lower brackets S1.
Remove the hanging
frame.
S2
S1
12
34
Place the hanging
frame on the
floor against the
wall. Locate
drilling points A.
Refit the hanging
frame, lining up with
drilling points Ato
find drilling points B
(you can also use a
level).
Drilling points A show the position for the lower fas-
tenings.
Drilling points B show the position for the upper fas-
tenings.
Drill the 4 holes and insert the wall plugs.
Use suitable wall plugs when fitting on a
specific support (e.g. plasterboard wall).
Position the hanging frame and screw it
down.
1 2
34
Drilling
points A
Drilling
points A
Drilling
points B

31
Wiring diagram for the heating panel
-Cut off the power supply and connect the wires as shown in the following diagram:
- You can connect the pilot wire if your home is equipped with a programming unit or controller.
In this case, make the following checks according the selected mode (Comfort, Eco, etc.) to that the
programming instructions are being transmitted correctly:
COM ORT ECO ROST
SWITCH-O
O HEATING
AND POWER
CUT-O
COM ORT
-1°C
COM ORT
-2°C
SIGNAL TO BE
TRANSMITTED
MEASUREMENT
BETWEEN THE
PILOT WIRE
AND NEUTRAL
0 Volt 230 Volts -115 Volts
negative
+115 Volts
positive
230 Volts
for 3 s
230 volts
for 7 s
CONNEC ING HE DEVICE
Connection rules and regulations
- The device must be supplied with 230V single-phase current at 50Hz.
- The device’s power supply must be directly connected to the main supply after the circuit breaker
without any intermediate switch.
- The device’s power cable must be connected to the main supply via a connection box. In damp areas,
such as bathrooms and kitchens, the connection box must be installed at least 25cm above the floor.
- An Earth connection is prohibited. Do not connect the pilot wire (black wire) to Earth.
- The installation must be fitted with an all-pole cut-off switch with a contact opening distance of at least
3mm.
- If the power cable is damaged, it must only be replaced by an electrician.
- If you are using the pilot wire and it is protected by a 30mA differential (e.g.: bathroom use), the pilot
wire’s power supply must also be protected on this differential.
GB

32
LOCKING HE DEVICE ON O HE HANGING FRAME
Position the tilted
device on brackets
S1.
Pivot the device
upwards and lift it to
position it on brack-
ets S2.
Lower the device onto the hanging frame. A
click tells you that the device is fastened and
locked in place.
12
3
S1
S2
CLIC
To unlock the device from the hanging frame, take a flat-bladed screwdriver and push the
slider (located on the top left-hand corner of the hanging frame behind the device) towards
the wall.
Lift the device while holding the slider in place with your screwdriver. Tilt it for-
wards and then remove it from brackets S1.

33
Aabsence and presence detector
BAiring function
CProgramming / Ste the correct time and day
DIncrease the temperature / Scroll
ETurn on / Change heating modes – scroll / Standby
FLower the temperature / Scroll
GConsumption indicator function
Operation
Control box
he different displays
Remove the plastic film on the control unit
or your comfort and to save energy, your device is equipped with a digital-display control unit. You
can set all of the device’s functions from the unit.
After 2 minutes of inactivity, the screen returns to the main display.
é
q
u
i
l
i
b
r
e
A
B
CD
E
F
G
PROG
Program displayed
Program selection
Airing function
Advised Eco temperatureDay and time
Action not possible
Consumption indicators
Temperature display or day
and time if being set
Controls locked
Heating indicator
Modes
GB

34
Use
ACTIVATING THE SCREEN
If the screen is not lit up, press any button to activate the screen lighting.
URNING ON YOUR DEVICE
When first turned on, the device is set to Comfort mode at 19°C.
PU ING YOUR DEVICE IN S ANDBY MODE
To turn on your device, press the
Power on key (E).
The device displays the ‘comfort’
temperature.
If the screen backlighting is not
active, press any button to reac-
tive it. You can now press the appropri-
ate button for the setting you
want to make.
To put your device in standby
mode, hold the Standby key (E)
down. The panel displays then turns
off.
é
q
u
i
l
i
b
r
e
E
é
q
u
i
l
i
b
r
e
E
é
q
u
i
l
i
b
r
e
é
q
u
i
l
i
b
r
e

35
CHOOSING YOUR HEA ING MODE
You can run your device in several modes:
-Comfort mode ( ) which enables you to have the right ambient temperature.
-Eco mode ( ) which enables you to lower the temperature in your room when you will be away
from your home for a long time or during the night, especially in bedrooms.
- The Programming mode, where you can program the Comfort and Eco modes depending
on when the room is used, using programs P1, P2, P3 or using a (centralised) programming system.
-Frost mode ( ) which enables you to maintain a temperature of around 7°C during an absen-
ce of more than 24 hours, for example.
PROG
GB

36
HEA ING YOUR ROOM :
HOW O USE COMFOR MODE
The advised Comfort temperature is 19°C.
The Comfort mode ranges from 12.5°C to 28°C.
This mode enables you to have the ambient temperature you desire in your room. The consumption
indicator lights enable you to optimise your setting (see page 48).
DESCRIPTION
HOW TO ACTIVATE THIS MODE ?
If the screen is not lit up, press any button to activate the screen lighting.
HOW TO CHANGE THE TEMPERATURE
Wait at least 6 hours for the room’s
temperature to stabilise.
To activate the Comfort mode,
press the Scroll key (E) several
times until the arrow is on the
Comfort mode.
The mode selection arrow flashes
for several seconds, then just the
icon remains on the display:
the setting is confirmed.
é
q
u
i
l
i
b
r
e
E
To change the temperature dis-
played, press the + (D) or – (F)
keys.
The heating icon appears on
the screen if the room tempera-
ture is lower than the one dis-
played.
é
q
u
i
l
i
b
r
e
D
PROG
If you want to change the room
temperature, change it by press-
ing the + (D) or – (F) keys.
As the temperature displayed on
the screen rises, the consumption
indicator light descends.
é
q
u
i
l
i
b
r
e
D

37
LOWERING HE EMPERA URE IN YOUR ROOM :
HOW O USE ECO MODE
We recommend that you use this mode when you will be absent for 2 to 24 hours, or during the
night, especially in bedrooms.
Maximum Eco temperature is 19°C.
The advised Eco temperature is -3.5°C compared with the Comfort temperature (setting example: 19°C in Comfort
mode and 15.5°C in Eco mode). If the -3.5°C icon does not appear on the screen, this means that the difference
compared with the set Comfort temperature is not 3.5°C.
If you lower the Comfort temperature to below the Eco temperature, the Eco temperature lowers by -0.5°C com-
pared with the Comfort mode If, however, you increase the Comfort temperature, the Eco temperature does not
change.
DESCRIPTION
HOW TO ACTIVATE THIS MODE ?
HOW TO CHANGE THE TEMPERATURE ?
GB
Press the scroll key (E) several
times until the selection arrow is
on mode.
The mode selection arrow flashes
for several seconds, then just the
icon remains on the display:
the setting is confirmed.
é
q
u
i
l
i
b
r
e
E
PROG
If you want, you can change the
temperature displayed by press-
ing the + (D) or – (F) keys.
The chosen Eco temperature
appears on the screen.
é
q
u
i
l
i
b
r
e
D

38
You can program your Comfort and temperature times either by using one of the three
prestored programs, or by connecting the pilot wire to a programming control ( ilot wire (F ) mode
is the default setting - refer to your programming control’s manual)
You can connect several devices to one programmer.
3 programs have been prestored: , and and they cannot be changed.
is recommended for when you are constantly at home, at the weekend for example (Eco mode
from 23h to 5h, Comfort mode from 5h to 23h).
is recommended if you are absent during the day (Eco mode from 23h to 5h and from 9h to 17h,
Comfort mode from 5h to 9h and from 17h to 23h).
is recommended if you are absent during the day, but you come back home at lunchtime (Eco
mode from 23h to 5h, from 9h to 12h and from 14h to 17h, Comfort mode from 5h to 9h, from
12h to 14h and from 17h to 23h).
means that a programming control is used.
PROGRAMMING HE HEA ING PERIOD :
HOW O USE PROG MODE
PROG
0h 1h 2h 3h 4h 5h 6h 7h 8h 9h 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 20h 21h 22h 23h
NB : If no command is received on the pilot wire, the device will function in Comfort mode.
When switching from Comfort to Eco mode, the new mode is active after about 12 seconds.
The Frost rotection and Load shedding commands have priority over the Eco, Comfort and pro-
gramming ( 1, 2, 3 and ) modes.

39
HOW TO SET THE DAY O THE WEEK AND TIME ?
Before programming the device, you must set the device to the correct time or make sure that the
system day and time is correct.
GB
To set the day of the week and
the time, hold the Programming
key (C) down for several sec-
onds.
The letters on the screen start
flashing: you can now set the day
of the week.
(J= day - LU = Monday)
C
To change the hour, press the +
(D) or - (F) key.
You have changed the hour. You
can now set the minutes.
é
q
u
i
l
i
b
r
e
D
To set the time, press the Scroll
(E) key.
The letters on the screen flash
so that you can change the hour.
é
q
u
i
l
i
b
r
e
E
To change the day, press the +
(D) or - (F) key.
You have changed the day. You
can now set the time.
é
q
u
i
l
i
b
r
e
D

40
N.B.: You can exit the settings at any time by pressing the rogramming key (C).
The settings made are saved.
To change the minutes, press the
+ (D) or - (F) key.
You can now confirm your set-
ting.
é
q
u
i
l
i
b
r
e
D
To set the minutes, press the
Scroll (E) key.
The letters on the screen flash
so that you can change the min-
utes.
é
q
u
i
l
i
b
r
e
E
To confirm the minutes, press
the Scroll (E) key.
The screen returns to the main
menu.
é
q
u
i
l
i
b
r
e
E

41
HOW TO ASSIGN A DAILY PROGRAM ?
a- You want to keep the selected program – Monday in the example
b-You want to change the selected program – Monday in the example
wo solutions are possible :
a- you want to keep the selected program,
b- you want to change the selected program.
GB
To access the daily program,
press the Programming key (C). or Monday, the ‘ P’ program is
selected.
(J= day - LU = Monday -
P = programming control)
C
You want to keep the ‘ P’ pro-
gram for Monday: press the
Scroll key (E). The program for Monday is con-
firmed. You can now select the
program for Tuesday.
é
q
u
i
l
i
b
r
e
E
You want to change the ‘ P’ pro-
gram for Monday: press the +
(D) or - (F) key until the pro-
gram you want flashes on the
screen.
You have chosen the P3 program
for Monday, you can now con-
firm.
é
q
u
i
l
i
b
r
e
D

42
HOW TO ASSIGN A DAILY PROGRAM TO ALL THE DAYS O THE WEEK ?
Carry out the same procedure for all the days of the week, up until Sunday, either keeping the selec-
ted program or changing it.
N.B.: Even if there is a power cut, the settings are saved.
HOW TO ACTIVATE THE PROGRAMMING MODE ?
PROG
N.B.: If the icon blinks, you need to check the day and time settings (see page 39).
Confirm the programs chosen
for each day of the week by
pressing the Scroll key (E). You have confirmed the daily
programs. You must now activate
the Programming mode.
é
q
u
i
l
i
b
r
e
E
To activate the Programming
mode, press the Scroll key (E)
until the arrow is on this mode
.
The mode selection arrow flashes
several seconds, then remains on
the display with the icon of
the mode being programmed.
é
q
u
i
l
i
b
r
e
E
PROG
PROG
PROG
PROG

43
ABSENCE OF MORE HAN 24 HOURS:
USING HE FROS PRO EC ION MODE
The rost Protection temperature is preset to 7°C (±3° C) and cannot be changed.
HOW TO ACTIVATE THE ROST PROTECTION MODE ?
GB
Press the scroll key (E) until the
selection arrow is on the rost
Protection mode. The mode selection arrow flash-
es for several seconds then the
icon remains on the display.
é
q
u
i
l
i
b
r
e
E
PROG

44
The function enables you to lower the temperature setting for your room automatically, as soon as
you leave it.
HOW O USE HE ENERGY-SAVING FUNC IONS :
ABSENCE AND PRESENCE DE EC ION
These functions enable your device to adapt itself to your daily life without your having to concern
yourself with it.
To use these functions, we recommend that you set the Comfort mode or Programming
mode.
These functions are in addition to the programming functions.
PROG
Absence detection is made from a height of over 45cm (Diagram 1) and operates progressively (Diagram 2):
12 cm
45 cm
20°
5 m
environ
Diagram 1
Diagram 2
E.g.: Your device is set to 19°C, in Comfort mode (whether programmed or not)
At 9:00, it detects your absence.
At 9: 30, its operating instructions are set to18°C.
At 10:00, its operating instructions switch to 17°C.

45
If your device detects no one in the room, it automatically lowers the temperature setting progressive-
ly to 3.5°C lower than the Comfort temperature setting.
The symbol flashes when it detects a presence.
HOW TO ACTIVATE THE ABSENCE AND PRESENCE DETECTION ?
HOW TO DEACTIVATE THE ABSENCE AND PRESENCE DETECTION ?
GB
To activate it, press the
Sweetcontrol key (A). The symbol for absence /
presence detection appears on
the screen.
A
To deactivate it, press the
Sweetcontrol key (A). The symbol for absence /
presence detection disappears
from the screen.
A