Atten ST-2065D User manual

The design of this product(including internal software) and its accessories is under
the protection of relevant state laws.Any violation of the relevant rights of our
company will be subject to legal sanctions.Users shall consciously abide by the
relevant state laws when using this products.
1.Copyright information
We will take no responsibility for any personal injury or property damage
caused by reasons other than the product quality problem,which may include
force majeure (natural disasters,etc) or personal behavior during the operation
of this product.This manual is organized ,compiled and released by SHENZHEN
ATTEN TECHNOLOGY CO., LTD. according to the latest product features. We
will not responsible for further notice of the subsequent improvement of the
product and this manual.
2.Disclaimer
The soldering iron needs to be tested before it leaves the factory,
so the soldering tip may cover a small amount of tin, and the
casing will be slightly yellowing, which is a normal phenomenon.
1
User Manual
Soldering Iron
ST-2065D/ST-2080/ST-2080D/ST-2150/ST-2150D
REACH

Users are required to have basic knowledge of common sense and electrical
operations before using the product. Minors shall use the product under the
guidance of a professional or guardian.
3.Essential knowledge for users
This product is a portable, temperature-adjustable, high-temperature
control soldering iron. The ceramic heating core uses a three-core
grounded power cable to effectively ensure the safety of the welding
operation.
4.Product overview
2
To avoid electric shock or injury to the human body or fire hazard,the follwing basic
rules must be observed when using the equipment.In order to ensure personal
safety,only parts and accessories approved or recommended by the original factory
canbe used, otherwise serious consequences may occur!
Misuse of this product may lead to serious injury to the user or material
damage to the object involved.
Caution
3.Essential knowledge for users
3.Safety precautions
WARNING
When using this product, the soldering pencil/soldering tip, with the temperature up to
150-480℃，may cause burns to the user or cause a fire due to improper application.
So Users shall strictly observe the following rules:
Keep this product away from flammable materials.
Keep the product out of children’s reach.
Do not use this product if you are inexperienced or have no sufficient necessary
knowledge without the guidance of related personnel.
Do not use this product under wet environment or with wet hands to avoid electric
shock.
Do not modify this product and its accessories without authorization.
Please turn off the power when replacing parts and iron tips, and not resume the use
until the equipment is completely cooled down.
Please use the accessories from the original factory when replacing the product parts.
Make sure to turn off the power switch when the equipment is temporarily stopped or
out of use.

·The handle structure is ergonomically designed for comfortable
grip.
·Display the temperature control status with a bright blue LED.
·The heating wire and sensor are made of PTC material, which is
quick in temperature rise and precise in temperature control.
·Auto-standby, auto-shut down is available.
·Using 3 cored power cable.
5.Features
Item No.
Voltage
Power
Temperature
range
Heater
Heating
indication
Temperature
unit
ST-2080
110/240VAC
80W
5set
adjustment
Blue LED
°C
ST-2150 ST-2080D ST-2150D
110/240VAC 110/240VAC 110/240VAC
150W 80W 150W
250°C~480°C
Four-core
PTC heater
250°C~480°C
Display
method LED LED LCD LCD
°C ° °C/ F ° °C/ F
Temperature
accuracy
Temperature
stability
10℃ 10℃ 10℃ 10℃
2℃ 2℃ 2℃ 2℃
6.Specification
5set
adjustment
Four-core
PTC heater Four-core
PTC heater
Four-core
PTC heater
Blue LED Blue LED Blue LED
Automatically sleep after 10 minutes and shut down after 20
minutes when the product stop operating
· Products use LCD display and LED display design
·Build in PID system ,adjust temperature by button,operate
easily .
3
± ± ± ±
± ± ± ±
*
ST-2065D
110/240VAC
65W
250°C~480°C
LCD
° °C/ F
10℃
2℃
Four-core
PTC heater
Blue LED
±
±

Soldering tip
Stainless steel
outer casing
Shell
Minus
button
Add
button
Menu
button
LCD
display 3corded
power cable
*Remark:ST-2065D/ST-2080D/ST-2150D with LCD display.
(ST-2065D/ST-2080D/ST-2150D )
Product feature
Operational Guide
A .Switch function
Charge on the product,short press power button,When booting, the screen
display the temperature, as shown in picture 1; when shutdown,the screen
display OFF,as shown in picture 2
Picture 1 Picture 2
B.9 groups shortcut temperature adjustment
In the working state,press ＂＋＂＂－＂ switch temperature group(the default
temperature value of 9 groups is: 250℃/482℉; 300℃/572℉;325℃/617℉;350℃
/662℉;375℃/707℉;400℃/752℉;425℃/797℉;450℃/842℉;480℃/896℉。)
4

Normal working
mode
Quick temperature
adjustment Temperature
compensation
adjustment
Temperature
unit switching
Auto-sleep
function setting
Back to normal
working mode
C.Setting mode
(1)Quick temperature adjustment
While in the working state, press the power button to enter the
quick temperature adjustment, press the ＂＋＂＂－＂ button to
adjust. Press fast adjustment, adjust the range：250℃-480℃
(2)Temperature compensation adjustment
In the fast temperature adjustment state, short press the power
button to enter the temperature compensation setting, press
＂＋＂＂－＂ adjust, long press to adjust quickly, the adjustment
range: ± 50 ℃ / ± 90 ℉
(3)Temperature unit switching
In the temperature compensation adjustment state, short press
the power button to enter the unit setting, press ＂＋＂＂－＂ to
switch C and F
(4)Auto-sleep function ON/OFF
In the temperature unit switching state,short press the power
button to enter the sleep setting ,press＂＋＂＂－＂adjust, 1
means ON,0 means OFF
5

Short press the power button to enter the normal state.
D.Heating
When the product is heated. The power light flashes, the
brightness changes according to the power level, and the
selected gear light is long.
E.Warning
When ＂H-E＂displayed on the screen,there is no temperature ,
which indicates that the heating element fails.
When ＂S-E＂displayed on the screen,there is a fault in sensor,
which signifies that there is something wrong in sensor or the
related circuit of the sensor.
（ST-2080/ST-2150)
Product feature
*Remark:ST-2080D/ST-2150D with LED display.
Soldering
tip
Stainless steel
outer casing
Shell
Minus
button
Add
button
Menu
button
Temperature
setting light
3corded
power cable
6

Operational Guide
A.Booting
Short press power button to boot,default 390℃ lights long after
booting.
B.Temperature switching
In the working state,short press ＂＋＂＂－＂to switch temperature.
C.Shutdown
In the working state,short press power button,the light of power
button flashing after shutdown.
D.Heating
When the product is heated. The power light flashes, the brightness
changes according to the power level, and the selected gear light is
long.
E.Warning
When 5 lighting are all flashing ,which indicates that the heating
element fails.
When 5 lighting are all lighting , there is a fault in sensor, which
signifies that there is something wrong in sensor or the related
circuit of the sensor.
7

Web:www.atten.com
Tel:[phone] Fax:[phone]
Facebook:Https://www.facebook.com/attencn/
E-mail:[email protected]
8
T2080-3.2D
T2150-3.2D
T2080-6.5C
T2150-6.5C
T2080-3C
T2150-3C
T2080-5C
T2150-5C
T2080-B
T2150-B
T2080-4.6D
T2150-4.6D
Heater Steel jacket
Soldering
tip
Screw
Soldering tips
T2080-K
T2150-K
T2080-6.5D
T2150-6.5D
CBN030753(A)