AU K012 Installation guide

Notes on
Cell Phone Use
Getting Ready
Making and
Answering Calls
Character Input
One Touch Key
Function
Mail
Camera
EZweb
Phone Book
Contents
Illustrations and
Screenshots
in This Manual
EZ News Flash
EZ Navi
In Case of
Loss of Your K012
Troubleshooting
Index
Safety Precautions/
Notes on water and
dust resistance
K012
Basic Manual

Introduction
Thank you for purchasing the K012. Before using your K012, be sure to read the K012 Basic Manual (this PDF manual)
to ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals and
keep it with your care so you can retrieve them whenever you need them.
Manuals for the K012
The K012 comes with the Basic Manual and Instruction Manual.
●For learning the basics:
Read the K012 Basic Manual (this manual).
●For learning details on using each function:
Read the supplied K012 Instruction Manual (Japanese). Be sure to read the Safety Precautions “安全上のご注意” to
ensure proper usage of the K012.
The keyword searchable au Online Manual is also available on the au homepage:
http://www.au.kddi.com/manual/index.html
•To access from EZweb (free of packet communication charge):
R⇒Top Menu/Search ⇒
auお客さまサポート
(au Customer Support) ⇒
オンラインマニュアル
(Online Manual)
Scan this QR code to access the au Online Manual. ▶
The K012 default setting, or its setting after being reset, is "Simple Mode". To use K012 with the bilingual function, you must
switch it "Normal Mode". Perform the following steps to switch to "Normal Mode". Descriptions in this manual are based on
"Normal Mode".
When the standby screen is displayed, press c.
➡Use u/dto select
各種設定
(Set Functions) and then press c(選択 [select]).
➡Use u/dto select
通常モード切替
(Switch to Normal mode) and then press c(選択 [select]).
➡Use u/dto select
はい
(Yes) and then press c(OK).
After the K012 is set to "Normal Mode", refer to steps in page 28 to switch to English language mode.

1
Illustrations and Screenshots in This Manual
Illustrations and Screenshots in This Manual
■Note on Illustrations
The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key
illustrations are also simplified as shown below.
Key Illustration Key Illustration
①XYZ ⑥
u
lcr
d
②&⑦)
③L⑧R
④N⑨C
⑤
123
456
789
*0#
⑩F
⑪B
⑫-+
■Note on Screenshots
The screenshots in this manual are simplified and may look different from the actual cell phone screens.
⑨
⑩
⑧
⑦
⑫
⑪
⑥
⑤
③
④
②
①

2
Safety Precautions/Notes on water and dust resistance
Safety Precautions/Notes on water and dust resistance
Exemptions
•The Company is not liable for any damages arising from
earthquakes, lightning, storms, floods or other natural
disasters, as well as fires, actions by third parties, other
accidents, intentional or mistaken misoperation by the
customer, or use under other unusual conditions outside
the responsibility of the Company.
•The Company is not liable for any incidental damages
(change/disappearance of saved content, loss of
business income, disruption of business, etc.) arising
from use of or inability to use the product.
•The Company is not liable for any damages arising from
failure to observe the described content of the "Instruction
Manual".
•The Company is not liable for any damages arising,
for example, from malfunction caused by combination
with connected devices or software not related to the
Company.
•Captured image data or downloaded data may
sometimes be altered or lost due to faults, repair or other
handling of the product. The Company is not liable for
any damage or lost income resulting from recovery of
these data.
•It is recommended you keep a copy of important data
in your PC's hard disk, etc. Whatever the cause of
fault or malfunction may be, the Company assumes no
responsibility for alteration or loss of saved information.
※"The Company" as appears on the product refers to the following companies:
Sold by: KDDI CORPORATION, Okinawa Cellular Telephone Company
Manufactured by:KYOCERA Corporation
Safety Precautions (Observe Strictly)
■Before using this product, thoroughly read these
safety precautions for proper use. After reading, store
the precautions in a safe place.
•These "Safety Precautions" describe instructions that
should be observed to prevent damage to property or
injury to the customer or others using the product.
•These instructions are divided into the following
categories.
■Explanation of indications used in this
manual
DANGER
This symbol indicates the potential and
imminent danger of death or serious
injury (*1) to a person.
WARNING
This symbol indicates the possibility of
death or serious injury (*1) to a person.
CAUTION
This symbol indicates the possibility of
personal injury (*2) to a person or physical
damage (*3).
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-
temperature), electric shock, broken bones, injuries with residual aftereffects
from poisoning, etc., or injuries requiring hospital admission for treatment or
longterm hospital attendance as an outpatient.
*2 Injury: This refers to injuries, burns (high- and low-temperature), electric
shock, etc. that do not require hospital admission for treatment or long-term
hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture,
livestock, or pets.

3
Safety Precautions/Notes on water and dust resistance
■Explanation of graphic symbols used
in this manual
Indicates an action that is not allowed (prohibited).
Indicates that disassembly is not allowed
(prohibited).
Indicates that handling with wet hands is not
allowed (prohibited).
Indicates that allowing the product to get wet is
not allowed (prohibited).
Indicates an action that must be done
(prohibited).
Indicates that the power plug must be
disconnected from the power outlet.
■Precautions common to the main unit,
battery pack, charging equipment, au
IC-Card, peripheral devices
DANGER Be sure to read the following
hazards before use.
Be sure to use only the exclusive peripheral devices. Use of other
peripheral devices might cause rupture, ignition, fire, or leakage of
liquid.
Exclusive peripheral devices for the K012
• CommonACAdapter01(0202PQA)(soldseparately)
• CommonACAdapter02(0203PQA)(soldseparately)
• DesktopHolder(KY010PUA)
• BatteryPack(KY003UAA)
• Earphoneadapter01forexternalconnectionjack(0201QVA)(sold
separately)
• CommonDCadapter01(0201PEA)(soldseparately)
• ACAdapterMIDORI(0205PGA)(soldseparately)
• ACAdapterAO(0204PLA)(soldseparately)
• ACAdapterSHIRO(0204PWA)(soldseparately)
• ACAdapterMOMO(0204PPA)(soldseparately)
• ACAdapterCHA(0204PTA)(soldseparately)
• ACAdapterREST(LS1P002A)(soldseparately)
• ACAdapterRANGERS(LS1P003A)(soldseparately)
• ACAdapterCHARGY(LS1P001A)(soldseparately)
• ACAdapterWORLDOFALICE(LS1P004A)(soldseparately)
• ACAdapterKiiRoll(L01P005A)(soldseparately)
• Portablecharger01(0201PDA)(soldseparately)
• USBcableWIN(0201HVA)(soldseparately)
• USBcableWIN02(0202HVA)(soldseparately)
• USBchargingcable01(0201HAA)(soldseparately)
ACAdaptersMIDORI,AO,SHIRO,MOMO,CHA,REST,RANGERS,
CHARGY,WORLDOFALICEandKiiRollhavethesamespecifications
with the Common AC Adapter 02.
Do not use, leave or store the product in hot places (e.g. by a fire, near
a heater, in the hot sun). Doing so might cause rupture, ignition, fire or
overheating.

4
Safety Precautions/Notes on water and dust resistance
Before entering an area where flammable gas is generated such as a
gas station, be sure to turn off the product. Do not charge the battery.
Do not throw the product into a fire or heat it. Doing so might cause
rupture, ignition, fire or overheating.
Do not put the product in a heating apparatus (microwave oven, etc.)
or a pressure vessel. Doing so might cause rupture, ignition, fire or
overheating.
Do not disassemble, modify or repair the product. Doing so might
cause rupture, ignition, fire, overheating, electric shock, or injury.
Modification of this cell phone is in violation of the Wireless Telegraphy
Act. Contact an au shop or Secure cell phone support center for
repairs due to malfunction. The Company is not liable even in the event
of any nonconformities arising on the K012 or peripheral devices as a
result of modification, etc.
Do not short-circuit the connection terminals. Do not allow conductive
foreign objects (metal fragments, pencil leads, etc.) to come into
contact with or get inside the connection terminals. Doing so might
cause rupture, ignition, fire, overheating or electric shock.
Do not drop from a high place or subject to strong impact, such as
throwing or stepping on the product. Doing so might cause rupture,
ignition, fire, overheating, or leakage of liquid.
Immediately discontinue use if there is smoke, abnormal odor or noise,
excessive overheating, or other abnormalities. If an abnormality occurs
while charging, immediately disconnect the specified charging
equipment (sold separately) from the power outlet or cigarette lighter
socket, make sure that the product is not overheating before turning
the power off, then remove the battery pack and contact an au shop or
Secure cell phone support center. Continued use in that state might
result in rupture, ignition, fire or overheating.
WARNING
Be sure to read the following
warnings before use.
Do not let your hands, fingers or other parts of the body touch the
connection terminals when power is on. Doing so might cause electric
shock or injury.
Do not charge the battery if the K012 is wet. Doing so might cause
electric shock or short circuit resulting in malfunction or fire.
Malfunction due to charging while wet is not covered by warranty and
exempt from repair.
Although the K012 has waterproof property, stop use if liquid such as
water gets inside the main unit from the external connection terminal
cover or the battery pack cover. Continued use of the product in this
state might cause overheating, fire or a fault.
If you drop or break the cell phone, discontinue use and contact an au
shop or Secure cell phone support center.
Do not leave in places within the reach of small children. Small children
might swallow parts, the battery pack, etc. by mistake and choke on
them or be injured.
Do not store the product in places subject to direct sunlight (e.g. in
automobiles), places that get extremely cold, and in humid or dusty
places. Doing so might cause ignition or fire.

5
Safety Precautions/Notes on water and dust resistance
CAUTION
Be sure to read the following
cautions before use.
If you carry the K012 on you (in a pocket, etc.), it may cause low-
temperature burns depending on the manner and time it is in contact
with you and the surrounding environment. Be especially careful not to
let the K012 be in contact with your skin or in a pocket for a prolonged
period in conditions when the K012 will become warm such as when
near heating appliances (kotatsu, heater, electric blanket), under a hot
sun, while charging, etc. The K012 may become hot and cause
low-temperature burns (skin redness, itchiness, etc.) depending on
your physical constitution and health.
Do not leave on unstable places such as rocky stands or tilting
surfaces. Dropping the product may cause injury. Also, take care that
the K012 does not vibrate and fall if its vibrator is set.
Do not touch the K012, battery pack or specified charging equipment
(sold separately) for a long time while power is being supplied from an
external source. Doing so might cause low-temperature burns.
Do not place near corrosive chemicals or in places where corrosive
gas is generated. Doing so might cause loss of internal data due to
malfunction.
Do not fold, bend or place a heavy object on the au IC-Card. Doing so
might cause a fault.
Do not touch the IC (metal) part of the au IC-Card or short-circuit it.
Doing so might cause loss of data or a fault.
Do not scratch the IC (metal) part of the au IC-Card. Doing so might
cause a fault.
Do not wet the au IC-Card. Doing so might cause a fault.
Do not use in humid places. When carried on you, humidity from
sweating may cause malfunction. Malfunction deemed to be caused
by wetting with water or humidity is not covered by warranty and
exempt from repair.
■Main unit
DANGER Be sure to read the following
hazards before use.
Do not use a cell phone while driving/riding a car, motorbike, bicycle,
etc. or walking. It may cause a traffic accident. Use of a cell phone
while driving a car or motorbike is hazardous and prohibited by law.
Use of a cell phone while riding a bicycle may be punishable by some
regulations.
Do not light the Camera light/simple light toward a driver of a car, etc.
If dazzled or surprised by the light, the driver might cause an accident.
Use of the main unit in an automobile sometimes affects on-vehicle
electronic devices, though this rarely happens. If this happens, stop
use since this may impair safe travel.
Do not use this product while you are aboard an airplane. Use of
electric devices transmitting radio waves in airplane is prohibited by
law. Some airline companies, however, allow their passengers to use
cell phones. For details, contact the airline company you use.

6
Safety Precautions/Notes on water and dust resistance
When using the cell phone near an implanted pacemaker, implanted
cardioverter-defibrillator or other electronic medical device, radio
waves might affect these units and devices. So, please observe the
following.
1. Those with an implanted pacemaker or implanted cardioverter-
defibrillator should carry or use the cell phone at least 22 cm away
from the pacemaker or cardioverter-defibrillator.
2. Turn the cell phone off in crowded trains or other crowded places,
since there may be people with a cardiac pacemaker or implanted
cardioverter-defibrillator nearby.
3. Pay attention to the following points when using the cell phone
inside medical institutions.
• Donotbringthecellphoneintooperatingtheaters,intensive-
care units (ICU) and coronary care units (CCU).
• Turnthecellphoneoffinhospitalwards.Cancelautopower-on,
alarm, and other automatic power-on functions before turning the
cell phone off.
• Evenifyouareinalobby,etc.,besuretoturnthecellphoneoff
when there are electronic medical devices nearby.
• Whenamedicalinstitutionhaslaiddowndesignatedareaswhere
use of the cell phone is prohibited or is not allowed to be brought
in, abide by the instructions of that medical institution.
4. Whenusingelectronicmedicaldevicesotherthananimplanted
pacemaker and implanted cardioverter-defibrillator outside a
medical institution (e.g. home medical treatment), check
individually with the manufacturer of the electronic medical device
regarding the influence of radio waves.
Thiscontentisbasedon“GuidelinesontheUseofRadio
Communications Equipment such as Cellular Telephones and
Safeguards for Electronic Medical Equipment” (Electromagnetic
Compatibility Conference, March 1997 [current Electromagnetic
Compatibility Conference Japan]) with reference also to “Report of
Investigation of the Effects of Radio Waves on Medical Equipment,
etc.”(AssociationofRadioIndustriesandBusinesses,March2005).
An investigation regarding the CDMA system was carried out in
FY2004,andtheaboveguidelinesandreportweredeemedtobe
reasonable in an announcement by the Ministry of Internal Affairs and
Communicationsin2005.
The product sometimes affects high-precision electronic devices. So,
turn it off near such devices. (Examples of electronic devices that
might be affected by the product include cardiac pacemakers, hearing
aids, other electronic medical devices, fire alarms, and automatic
doors. If you are using an electronic medical device, contact the
device manufacturer or retailer for information about the possible
affect of radio waves.)
Stay alert to your surroundings when calling, messaging,
photographing, gaming, browsing the Internet, or listening to music.
Use without checking for safety might cause you to fall or a traffic
accident.
Take care with the volume if using an earphone (sold separately).
Difficulty hearing sounds around you might result in an accident.
Immediately stop using the K012 outside when you can hear thunder.
Failure to do so might risk lightning strikes and electric shock. Turn off
the K012 and move to a safe place.
WARNING
Be sure to read the following
warnings before use.
The K012 is not completely water-/dustproof. Failure to observe items
1to4belowand“Notesonwateranddustresistance”onpages16
to 19 may result in ignition, overheating, injury, electric shock, or
malfunction.
1. Do not use under water (including key operation).
2. Do not immerse in liquid other than room temperature fresh water/
tap water.
3. Donotsubjecttostrongwaterflowexceedingspecification(IPX5/
IPX7)(page16)orleaveunderwaterforanextendedtime.
4. Donotplaceonasandybeachorsimilarplace.
Do not light the Camera light/simple light in front of a person's eyes.
Do not gaze at the light emitting part when the Camera light/simple
light is lighted. Doing so might cause impairment of eyesight, etc. Be
especially careful not to shoot small children from a very close
distance.

7
Safety Precautions/Notes on water and dust resistance
Do not send data with the infrared port pointing toward eyes. Doing so
might cause vision impairment. Also, sending data with the infrared
port pointing toward some other infrared device might cause false
operation, etc.
If the K012 is damaged or internal parts are exposed, do not touch the
broken or exposed parts. Doing so might cause electric shock or
injury. Discontinue use and contact an au shop or Secure cell phone
support center.
Do not sound the security buzzer next to ear. Doing so might impair
hearing.
If you have a weak heart, be careful when setting the level of vibration
and volume to prevent the possibility of adverse effects on your heart.
Do not gaze at bright or flickering light from the screen in a dark room.
Sometimes, very rarely some people demonstrate symptoms such as
muscle spasms, loss of consciousness, etc. by gazing at bright light
or watching repeatedly flickering screens. Those with a past history of
this should always consult with a physician beforehand.
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause ignition or fire by the light-collecting
mechanism of the lens.
Use the product with the covers of external connection terminal,
battery pack, etc. closed. If the covers are open, dirt or water may get
inside causing a fault due to electric shock or short circuit.
CAUTION
Be sure to read the following
cautions before use.
Never use modified au cell phones. Use of a modified device violates
theRadioLaw.
This au cell phone has acquired the certification of conformity with
technical regulations for the specified radio station based on the Radio
Law,andthe"TechnicalConformityMark " is printed on the
nameplate of the au cell phone as a certificate.
If the screws of the au cell phone are removed and modifications are
made to the internal components, the certification of conformity with
technical regulations will become invalid. Never use the au cell phone
withoutthevalidcertification.DoingsoviolatestheRadioLaw.
Pay attention to items becoming stuck to the speaker. The speaker
uses magnets, and so thumbtacks and pins, craft knife blades,
staples, and other metal objects sometimes become stuck to the main
unit, and cause unexpected injury. Before using the product, be sure
to check that there are no foreign objects on the speaker or other
parts.
Do not swing the K012 around by holding the hand strap or shake the
K012 excessively. Doing so might strike others or things around you,
causing damage or injury.
Be careful not to your pinch fingers/hand when closing the K012.
Doing so might cause injury.
Be careful not to your pinch fingers/hand in hinge (between display
and keypad) when opening the K012. Doing so might cause injury. Do
not leave in reach of infants or young children.
Do not listen for an extended period with loud volume that is hard on
the ears, either directly or with an earphone (sold separately). Doing
so might affect hearing.
Do not bring the product close to or fold the product to hold
magnetized objects such as cash cards, floppy disks, or credit cards,
or electronic devices and metal items. Doing so might result in loss of
magnetic information.

8
Safety Precautions/Notes on water and dust resistance
UsetheK012intemperaturesbetween5°Cand35°C(limiteduse
between36°Cand40°C)andhumiditybetween35%and90%.
Repairs are not covered by warranty if malfunction is deemed to be
due to use in extremely hot or cold conditions exceeding these
ranges.
Remove the protective sheet from display before use. Use with the
protective sheet applied may cause injury. Be careful not to cut your
fingers, etc. when removing.
Do not forcefully remove an inserted microSD memory card. Doing so
might result in malfunction or loss of stored data.
Use only specified microSD memory cards. Failure to do so may result
in malfunction or loss of stored data. For details on au-specified items,
contact an au shop or the Customer Service Center.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition. See the
following table.
The materials of parts used in the K012 are as follows.
Location Material Finish
Outercase(LCDfrontcase,key
front case, key rear case), battery
cover
PA+GF
resin
UVcuredacryliccoating
Outercase(LCDrearcase)
Hingecover(L/R)
PC+GF
resin
UVcuredacryliccoating
External connection terminal cover PC resin +
TPE resin
UVcuredacryliccoating
Infrared port window PC resin -
Speaker plate, Address book key,
Camera key, OK key, Mail key,
EZ key, Answer key,
Clear/Memo key, End key,
Numberkeys,Voicereadkey,
Plus key, Minus key,
*
key, #key,
Upkey,Left/Incominghistorykey,
Right/Outgoing history key,
Down/Appli key, One touch key
PC resin UVcuredacryliccoating
Key plate PET resin -
Power switch
PC/ABS resin
-
Lockswitch POM resin -
Window panel (main) PC resin Acrylic coating
Chemical hardening
Camera plate Acrylic resin Chemical hardening
Window panel (sub)
Incoming (charging) indicator
window
Acrylic resin PET film finish
Cushion (under number keys) PU resin -
Charging terminals Phosphor
bronze
Goldplating(baselayer:
nickel)

9
Safety Precautions/Notes on water and dust resistance
■Battery pack
(The battery pack of this product is a lithium-ion
battery.)
The battery pack is not fully charged at the time of
purchase. Charge the battery before using the product.
DANGER
Mishandling is dangerous as it
might cause overheating,
leakage or rupture.
Be sure to read the following
hazards before use.
Do not short-circuit the (+) and (-) terminals of the battery pack. Doing
so might cause rupture, ignition or overheating.
Do not allow metal objects (such as necklaces and hairpins) to come
in contact with the connection terminals when carrying or storing the
battery pack. Doing so might cause the battery pack to short-circuit,
causing rupture, ignition, or overheating due to excessive current flow.
Do not connect the battery pack to the K012 or charging equipment
with (+) and (-) reversed. Connecting in an incorrect orientation might
cause rupture, ignition or overheating. Do not try to forcibly connect
the battery pack, instead thoroughly check the connection terminals
before connection.
Do not puncture the battery pack with a nail, hit it with a hammer or
step on it. Doing so might cause rupture, ignition, overheating or
leakage of liquid.
Do not directly solder or disassemble or modify the battery pack.
Doing so might cause spilling of the battery liquid resulting in an
accident such as loss of eyesight if it gets into eyes, or cause rupture,
ignition or overheating.
Discontinue use of a battery pack if it is leaking battery liquid or
emitting an odor. Do not touch liquid directly. Move the battery pack
away from any nearby fire. Failure to do so might cause the leaked
liquid to catch fire resulting in rupture or ignition.
Never use the cell phone with wet hands.
WARNING
Mishandling might cause
overheating, fire, electric
shock, etc.
Be sure to read the following
warnings before use.
The battery pack is not waterproof. Do not wet the battery pack with
water, seawater, pet urine, etc. Do not charge a wet battery pack. A
wet battery pack might cause overheating, damage or ignition.
If the liquid gets into your eyes, do not rub but wash your eyes
thoroughly with clean water, and immediately seek treatment by a
doctor. If left unattended, there is a risk of losing your eyesight. If the
liquid gets on a device, wipe it off without touching it.
CAUTION
Mishandling might cause
overheating, fire, electric
shock, etc.
Be sure to read the following
cautions before use.
If internal fluid comes in contact with your skin or clothing, immediately
wash off thoroughly with clean water. Contact with skin might cause a
skin rash.
Do not discard an old battery pack together with regular trash. Please
cooperate in the collection of an old battery pack when it is no longer
needed to protect the environment and effectively use resources.
Used battery packs are collected at au shops and other places.
Do not remove the sticker from around the battery pack. Doing so
might result in malfunction.

10
Safety Precautions/Notes on water and dust resistance
■AC adapter
DANGER
Mishandling might cause
overheating, fire, electric
shock, etc.
Be sure to read the following
hazards before use.
Install and position in-car devices, such as the common DC adapter
01 (sold separately), where they do not hinder driving or safety
equipment such as airbags. Failure to do so might cause a traffic
accident. Install in-car devices following the instructions of their
manuals.
Do not use the desktop holder in a vehicle. Doing so might cause
accident by falling or hindering driving. The desktop holder assumes
use indoors on a stable surface.
If charging is not completed after the specified time, stop charging.
Failure to do so might cause leakage of liquid, rupture, ignition, fire or
overheating with regard to the battery pack.
Contact an au shop or Customer Service Center.
If you hear thunder, do not touch the specified charging equipment
(sold separately). Doing so might cause an electric shock as a result
of a lightning strike.
WARNING
Mishandling might cause
overheating, fire, electric
shock, etc.
Be sure to read the following
warnings before use.
Do not use at other voltages than the specified power supply voltage.
Doing so might cause fire, overheating or electric shock.
• Usedomestic(Japan)household100VACforCommonACAdapter
01 (0202PQA) (sold separately). Do not charge with single phase
200Vorwithatravelconverter.
• Thefollowingarecompatiblewith100to240VAC,however,they
can only be used within Japan for the K012: Common AC Adapter
02(0203PQA)(soldseparately)/ACAdapterMIDORI(0205PGA)
(soldseparately)/ACAdapterAO(0204PLA)(soldseparately)/AC
AdapterSHIRO(0204PWA)(soldseparately)/ACAdapterMOMO
(0204PPA)(soldseparately)/ACAdapterCHA(0204PTA)(sold
separately)/ACAdapterREST(LS1P002A)(soldseparately)/AC
AdapterRANGERS(LS1P003A)(soldseparately)/ACAdapter
CHARGY(LS1P001A)(soldseparately)/ACAdapterWORLDOF
ALICE(LS1P004A)(soldseparately)/ACAdapterKiiRoll
(L01P005A)(soldseparately).
• UseCommonDCAdapter01(0201PEA)(soldseparately)ina12or
24VDCnegativeearthcar.
When plugging a specified AC adapter (sold separately) into an outlet,
do not allow a metal strap or accessory come in contact with the
power plug. Doing so might cause ignition, fire, electric shock or injury.
Unplug the power plug from the outlet or cigarette lighter socket when
not charging. Failure to do so might result in ignition, fire, or electric
shock.
Firmly insert the specified charging equipment's (sold separately)
power plug into the power outlet or cigarette lighter socket down to the
base of its pins. Incomplete insertion of the power plug might result in
ignition, fire, overheating or electric shock.

11
Safety Precautions/Notes on water and dust resistance
The specified charging equipment (sold separately) is not waterproof.
Do not use in places subject to direct splashing with water, pet urine or
other liquids. Doing so might result in overheating, ignition, fire,
electric shock, or short-circuiting of electronic circuits. In the event that
the product is splashed with liquid, immediately disconnect the power
plug from the outlet or cigarette lighter socket.
Never use the cell phone with wet hands.
Never use in humid places such as bath areas. Doing so might cause
electric shock or a fault.
Do not charge the battery pack if wet.
While charging, do not cover or wrap the product with a cloth or
bedding. Doing so might cause ignition or fire.
Do not use power outlets or wiring apparatus beyond its rating. Also,
exceeding rating, for example, by connecting multiple devices to a
single power strip might cause ignition, fire or overheating.
Do not damage, modify, twist, pull, place a heavy object on, or use the
power cord of the specified charging equipment (sold separately)
while bundled. Do not use a damaged power cord. Doing so might
cause ignition, fire, electric shock or short circuit.
Before cleaning the specified charging equipment (sold separately),
unplug its power plug from the outlet or cigarette lighter socket. If the
plug remains plugged in when you clean the equipment, it might
cause an electric shock or short circuit.
Wipe off dust on the power plug of the specified charging equipment
(soldseparately).Leavingitdustymightcauseignitionorfire.
When unplugging the specified charging equipment's (sold separately)
power plug from the outlet or cigarette lighter socket, always hold and pull
the power plug. If you pull the power cord, the power cord might be
damaged, resulting in ignition, fire or electric shock.
Useafuseofthespecifiedtype(250V,1A)inthecommonDC
adapter 01 (sold separately). Using a different type of fuse might
cause ignition, fire or overheating. (For information about fuse
replacement, carefully read the manual for the common DC adapter 01
(sold separately).)
CAUTION
Mishandling might cause
overheating, fire, electric
shock, etc.
Be sure to read the following
cautions before use.
Do not use the common DC adapter 01 (sold separately) with the car
engine stopped. Doing so might result in draining of the car battery.

12
Safety Precautions/Notes on water and dust resistance
Handling precautions
These precautions are provided to ensure that performance
can be fully demonstrated. Thoroughly read these
precautions to ensure correct use.
■Stored content/mail/data/etc.
●Content stored on the K012 (phone book, Data Folder, e-mail, C-mail,
Bookmark, etc.) may be altered or lost due to accident, malfunction/repair, or
other handling. Keep a separate copy of important content. In the event of
alteration or loss, the Company bears no liability for damages or lost
earnings.
■Precautions common to the main unit,
battery pack, charging equipment, au
IC-Card, peripheral devices
●Applying excessive force to the product might damage the display or internal
circuit board resulting in malfunction. Be sure not to sit on it in a pants/skirt
pocket or put it in a bag with heavy objects on top. Keeping an external
device connected to the external connection terminal or earphone jack might
damage the connector resulting in a malfunction. Such damage and
malfunction are not covered by the warranty, even if there is no external
damage.
●Do not use the product in extremely hot, cold or humid places. (Use within an
ambienttemperaturerangeof5°Cto35°Candhumidityrangeof35%to
85%.)
- Charging equipment
- Peripheral devices
●Do not use the product in extremely hot, cold or humid places. (Use within an
ambienttemperaturerangeof5°Cto35°C(temporaryuseat36°Cto40°Cis
allowed)andhumidityrangeof35%to90%.
- K012 main unit
- au IC-Card (when installed in K012)
- Battery pack (when installed in K012)
●Do not use in places subject to lots of dust or vibration.
●Clean the external connection terminals/charging terminals with dry cotton
swabs, etc. every now and then. Soiled terminals might cause poor
connection. Do not exert a strong force to clean the connection terminals to
prevent deformation and scratching.
●Clean the product with a soft dry cloth. Do not wipe the product using
benzene, thinner, alcohol, detergent, etc., which might affect the outer casing
or printing.
●Useasfarawayaspossiblefromland-linephones,TVsandradios.Use
nearby might affect them.
●The K012 may become warm while calling, connected to EZweb, messaging,
or while charging or during other operations, depending on the situation, but
this is not abnormal.
●Turn off the power before removing the battery pack. If you remove the battery
pack with the power on, saved data might be altered or lost.
●The security buzzer is not by any means a guarantee of crime prevention or
safety.
●When the product is used by a child, to avoid hazards, parents or guardians
should thoroughly read the “Instruction Manual” (this manual) and teach the
child how to use it.
Also make sure that they are using it as instructed.
■Main unit
●Do not remove the stickers printed with the serial numbers on the K012
(visible when the battery pack is removed). These stickers prove that the
K012 is permitted under the Wireless Telegraphy Act and
Telecommunications Operations Act.
●Note that mail and downloaded data (both charged or free content) saved on
the K012 cannot be returned to the customer when the K012 is replaced with
another au cell phone for model upgrade, repair of a fault, etc.
●Although the display used on the K012 is made using high-precision
technology, some pixels (dots) might be lit or out at all times. This is not a
malfunction.
●Take care not to inconvenience people around you when you use the product
in a public place.

13
Safety Precautions/Notes on water and dust resistance
●Do not exert force on the hinge (between display and keypad) when opening
or using the K012. Exerting force by swinging or bending the K012 backward
might result in malfunction or damage. Use with care.
●Do not forcefully press, tap or intentionally subject the display to strong
impact. Doing so might cause scratching or damage.
●Take care that hard objects do not rub against and scratch the display or
camera lens.
●When you put the product in your pocket or bag, take care so that the
display does not come in contact with metal objects or other hard objects.
Also, be careful not to scratch or damage the display by using a strap whose
metal or other hard part comes in contact with the display.
●The display may appear dark or warped depending on the angle if viewed
while wearing polarized sunglasses or similar eyewear.
●When suddenly brought into a warm indoors place from a cold outdoors
place, or when in a humid location, water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when used under
conditions such as this, humidity might cause corrosion or a fault.
●Do not leave the cell phone near air conditioning vents. Condensation from a
sudden temperature change may corrode the inside of the cell phone and
cause malfunction.
●Do not place stickers on the display/key side of the cell phone. After closing
the K012, the keys, etc. may be pressed and cause misoperation, or key
operations while closed may be unavailable or usable time may be
shortened. The K012 may also be damaged.
●Trying to press keys while data is playing back may cause unusual operation
such as data pausing.
●Continuously displaying the monitor screen during photography or
continuous video recording, use of EZweb, etc. for extended periods
repeatedly causes K012 components to become warm, and may result in
low-temperature burns with prolonged skin contact.
●Placing a strong magnet close to the product might cause malfunction.
●To prevent unauthorized use in case of theft or loss, the K012 is locked so that it
cannot be used unless the legitimate user's au IC-Card is inserted. If the user is
changed to some other person, the new user should bring the au IC-Card to an
au shop or PiPit. Note that a fee is charged for ownership change.
●Surroundingbrightnessisdetectedbytheopticalsensor(page25).Take
care not to cover it with your fingers.
●Do not discard the product together with regular trash. Please cooperate in the
collection of the product when it is no longer needed to protect the environment
and effectively use resources. Old products are collected at au shops and other
places.
●When using handsfree call, take care to keep the speaker at a safe distance
from your ears, as the speaker volume may be too loud.
■Battery pack
●Use in very hot or cold environments, for example, when left in an automobile
with the windows closed in summer, will cause the battery capacity to drop
and shorten the available battery usage time. This will also shorten the
battery pack's service life. Try to use the battery pack as far as possible at
room temperature.
●When the battery pack is not to be used for a long time, remove the battery
pack from the main unit, and store it in a battery pack case away from hot
and humid places (a battery pack case is included with an additional battery
pack (sold separately)).
Data stored in the K012 may be lost if left uncharged for an extended time.
●Charge the battery pack before using the product for the first time after
purchase, or if you have not used the product for a long time (the battery
pack may become warm during charging, but this is not a malfunction).
●The battery pack is a consumable item. If the performance of a battery pack
does not recover after charge or is bulging, the battery pack is at the end of
service life, so buy a new one of the specified type. Note that the length of
service life varies depending on the usage condition, etc.
●Do not discard battery packs together with regular trash. Please cooperate in
the collection of used battery packs to protect the environment and
effectively use resources. au shops and other retailers collect used battery
packs.
●Battery packs sometimes swell up as they approach the end of their service
life. This is due to the properties of lithium-ion batteries, and is not a problem
in terms of safety.

14
Safety Precautions/Notes on water and dust resistance
■AC adapter
●When not using the specified charging equipment (sold separately), remove
its power plug from the power outlet or cigarette lighter socket.
●Clean the K012’s charging terminals and the desktop holder's terminal
periodically using a dry cotton swab. Soiled terminals may result in poor
connections.
●Do not wrap the specified charging equipment's power cord around the
power plug or desktop holder. Doing so might cause electric shock, ignition
or fire.
■au IC-Card
●The au IC-Card is lent to you by au. In case of loss or damage, the card will
be replaced at your expense. When malfunction is suspected, or in case of
theft or loss, contact an au shop or PiPit.
●Do not forcibly remove or insert the au IC-Card.
●You are responsible for any damage caused by inserting your au IC-Card
into some other IC card reader/writer, etc.
●Keep the IC (metal) part of your au IC-Card clean.
●Clean usually by wiping with a soft, dry cloth. Take care not to wipe too hard
and deform or scratch terminals.
●Do not put stickers, etc. on the au IC-Card.
●The au IC-Card may become warm during use, but this is not a malfunction
and you can continue to use the card.
●
Do not disassemble or modify the au IC-Card. Doing so might cause loss of data
or a fault.
●Do not insert non-au IC-Cards in this cell phone. You cannot use cards other
than au IC-Cards inserted in this cell phone.
■Camera
●Do not leave the camera lens exposed to direct sunlight. Imaging elements
might be discolored or burnt.
●When using the camera, follow common rules of etiquette regarding camera
use.
●When photographing important occasions (such as a wedding), take a trial
shot and check the shot image to make sure it is correctly shot, and audio to
make sure it is audible.
●Image data (below, “data”) might be altered or lost due to malfunction, repair
or other handling. The Company takes no responsibility for recovery of
altered or lost data, damages resulting from altered or lost data, and lost
profits.
●Do not use the camera for recording information in places, bookstores, etc.
where photographing is not allowed.
■Copyrights and rights of portrait
●You are not allowed to copy, modify or edit the data you shot or recorded
using the K012 without consent of the copyright holder, except for personal
use, under the copyright law. In addition, do not use or modify portraits or
names of other individuals without their consent, as it might infringe on rights
of portrait.
●Also be careful about the copyright and portrait right when posting photos
you shot, etc. on Internet homepages. Restrictions may also be in place on
photography/recording, even for personal purposes, of performances,
entertainment, exhibitions, etc.
●You cannot transfer images or sound protected under copyright where such
use exceeds stipulations of copyright laws.

15
Safety Precautions/Notes on water and dust resistance
<Backup content on the product>
●Please back up* important content received by
or downloaded to the K012 to an outside source.
Content recorded to memory on the K012 sometimes
disappears or is altered by unexpected factors, such
as static electricity or a fault, repair, mishandling, etc.
*Howtomakebackups
•Store important data such as phonebook data,
music (incoming ring tone, etc.), shot photos and
videos on microSD memory cards. You can also
send files as e-mail attachment or transfer to your
PC. Note, however, that there are some data that
cannot be copied by using these means.
■Information
•Reproduction of the content of this manual in part or in
whole is prohibited.
•The content of this manual is subject to change
without notice.
•Every effort has been made in the preparation of
this manual. Should you notice any unclear points,
omissions, etc., feel free to contact us.

16
Safety Precautions/Notes on water and dust resistance
Notes on water and dust
resistance
TheK012haswaterresistanceequivalenttoIPX5andIPX7,aswellasdust
resistanceequivalenttoIP5X(withtheexternalconnectionterminalcoverand
batterycoversecurelyattached(basedonin-housetesting).However,use
regardlessoftheprecautionsonpages16to19mayresultinwater
seepage or intrusion of sand/foreign particles, resulting in overheating, ignition,
electricshock,scratching,malfunction,etc.Readtheprecautionsonpages16
to 19 for safe use.
• IPX5equivalent
Means that the product will maintain its operability as a phone even if it is
sprayedwithwaterfroma6.3mmdiameternozzleatadistanceofabout3
metersformorethan3minutesatarateofabout12.5litersperminutefromany
direction.
• IPX7equivalent
Means that the product will maintain its functionality as a phone with no water
getting inside the main unit even if it is gently submerged in a tank of still tap
water at room temperature to a depth of 1 meter for about 30 minutes.
• IP5Xequivalent
Means that the product has sufficient protection to maintain certain operability
andsafetyevenaftergritanddustfordustprooftesting(diameterof75μmor
less) has entered it.
• Specifically,youcanusetheproductintherain(lessthan20mmperhour)
without umbrella, as well as use the product in a place with water such as a
bathroom, kitchen or poolside.
Important items to remember before use
• Firmlyclosetheexternalconnectionterminal
cover and attach and lock the battery cover
to prevent water seepage. Make sure that
they are securely closed so that they are not
raised.
• Justasmallparticle(ahair,grainofsand,etc.)onthesealscancausewater
leaks.
• Donotplacetheproductonsandatabeach,etc.Grainsofsandorother
small particles might get into the microphone or speaker causing the volume to
drop.
• Donotuse(includingopening/closingandkeyoperation)theproduct
underwater.
• Donotexposetheproducttoorimmerseitinliquidsotherthanroom
temperature fresh water/tap water (water with soap, detergent, bath salts, hot
spring, boiling water, sand/mud, seawater, a swimming pool, alcohol, etc.).
Soap, detergent,
bath salts
Hot spring Boiling water Sand, mud Seawater Pool water
How to close the external connection terminal cover
After stowing the cover hinge, press on the external connection
terminal cover ①evenly with the flat part of your finger.
Then, rub your finger over the cover in the direction of arrow ②to
ensure that the cover is not partially open.
①②

17
Safety Precautions/Notes on water and dust resistance
Closing the battery cover
Close firmly so that the battery cover is not raised.
1Holdbatterycoverwithtwoforemosttabsatangle,andinsertincellphone.
2Check that lock switch is unlocked, and press along the arrows in directions
of ①to ②. Always check that battery cover is not raised.
3Slide lock switch to right until the arrow is no longer visible.
②
②
①
①
Precautions
■Notes on various usage scenes
<In the rain>
• Donotuseinheavyrain(morethan20mmperhour).
• Neveropen/closetheexternalconnectionterminalcoverorbatterycoverifthe
product is exposed to rain, or your hands are wet.
<Bathroom>
• Donotimmerseordropintub.Donotuseunderwater.
• Donotimmersetheproductinsoapwater,detergentwater,waterwithbath
salts in it, or in hot spring water.
• Donotexposedirectlytowarmshower.
• Donotsplashtheproductwithhotwater.
• Donotusetheproductinabathroomforanextendedperiodoftime.
• Useintemperaturesbetween5°Cand35°C(limitedusebetween36°Cand
40°C)andhumiditybetween35%and90%.
• Donotbringthedesktopholderintoabathroom.Also,donotusethedesktop
holder if it has condensation.
<In the kitchen>
• Donotsplashtheproductwithorimmerseitinliquidssuchassoapwater,
detergent water, seasonings, juices, etc. other than fresh water/tap water.
• Donotsplashtheproductwithorimmerseitinhotwaterorchilledwater.
• Donotplacetheproductwhereitgetsextremelyhotorcoldsuchasneara
stove or in a refrigerator.
• Donotexposetostrongwaterflow(morethan6L/min.).
<Poolside>
• Donotimmerseordropinpoolwater.Donotuseunderwater.
• Poolwatercontainsdisinfectingchlorine.Ifexposedtopoolwater,immediately
wash off with room temperature tap water*. Do not use a brush.
*Ratherweakwaterflow(lessthan6L/min.)
■Common precautions
• Firmlyclosethecoveroftheexternalconnectionterminal,andfirmlyattach
then lock the battery cover after checking that the rubber seal on the underside
is positioned correctly. A caught particle (lint, a hair, grain of sand, etc.), no
matter how small, may result in seepage.
• Donotinsertpointedobjectsingapsaroundthecoveroftheexternal
connection terminal or battery cover. Doing so might damage the rubber seals
and cause seepage.
• Donotopen/closethecoveroftheexternalconnectionterminalorremove/
attach the battery cover while wearing gloves. A caught particle (lint, a hair,
grain of sand, etc.) on the gloves, no matter how small, may result in seepage.
• Beforeopening/closingthecoveroftheexternalconnectionterminalor
removing/attaching the batter cover, check that there is no wetting, sand,
soiling, etc. on the cell phone or your hands. Wetting, sand, soiling, etc. on
them may enter the cell phone or become caught under the covers and cause
malfunction or seepage. If even a small amount is present, wipe cell phone and
hands with a lint-free, clean, dry cloth before working.
• Donotleavethecellphonewithwettingonit.Wettingmayenterthecellphone
from the hinge or other gap. If the cell phone remains wet, sound quality may
be affected. If wetted with water, remove water such as by shaking the cell
phone (page 19), then quickly wipe away any water on the cell phone with a
lint-free, clean, dry cloth. In cold regions, any water on the K012 may freeze
and result in malfunction.

18
Safety Precautions/Notes on water and dust resistance
• TheK012iswaterproofonlyforfreshwater/tapwater,andisnotwaterprooffor
hot water, salt water, detergent, chemicals, sweat, etc. If exposed to water
other than fresh water/tap water (seawater, detergent, etc.) or sand/mud,
immediately wash off with room temperature tap water*. Wash without a brush
using hands, and hold the battery and external connection terminal covers
closed.
*Ratherweakwaterflow(lessthan6L/min.)
• Thecellphoneisnotdesignedtowithstandwaterpressure.Donotexposeto
strongwaterflowexceedingspecification(IPX5/IPX7)(e.g.,waterflowfroma
tap/shower strong enough to feel painful) or leave under water for an extended
period.
• Donotwashinawashingmachineorultra-sonicwashingmachine.
• Donotsubjecttostrongshockwhilesubmersed(e.g.,donotdropina
water-filled basin, toilet, or washing machine).
• ApartfromtheK012,accessories(desktopholder,etc.)arenotwater-/
dustproof.
• NeverchargetheK012whileitiswet.Chargingwhilethechargingterminals
are wet might result in malfunction, overheating, etc.
• Donotpokepointedobjectsintheholesofthemicrophone/speaker.
• Therubbersealsontheundersidesofthecoveroftheexternalconnection
terminal and battery cover are important for maintaining water and dust
resistance. Please note the following.
- Do not remove or scratch.
- Do not allow dirt to adhere to them. An adhering particle (lint, a hair, grain of
sand, etc.), no matter how small, may result in seepage. Always remove any
particles.
- Adherence of liquid other than fresh water/tap water (hot water, salt water,
detergent, chemicals, sweat, etc.) may affect water and dust resistance.
- Take care not to pinch rubber seals when closing covers. Trying to close
covers while seals are pinched may scratch them and affect water and dust
resistance.
- Replacement (at cost) of waterproofing parts regardless of appearance is
recommended every two years. Contact your nearest au shop or Secure cell
phone support center for parts replacement.
• Donotdroporotherwisesubjectthecellphonetostrongshock.Mayaffect
water and dust resistance.
• TheK012doesnotfloatinwater.
• Donotimmerseinhotwater,useinasauna,orexposetohotairflow(hairdryer,
etc.). The cell phone is not designed to withstand heat.
• Useintemperaturesbetween5°Cand35°C(limitedusebetween36°Cand
40°C)andhumiditybetween35%and90%.Useinextremelyhotorcold
conditions exceeding these ranges may affect water and dust resistance.
• Suddentemperaturechangemaycausecondensation.WhenmovingtheK012
from a cold to warm place (to a bathroom, etc.), move it after allowing it to
reach room temperature. The cell phone is not designed with anti-condensation
features.
* If condensation forms inside the display, leave at room temperature until the
condensation clears away.
• Thecellphonehasbeentestedaccordingtoassumeduseandverifiedto
meetperformancerequirements.However,operationunderanyandall
conditions in actual use is not guaranteed. Repairs will not be covered by
warranty and carried out at cost if malfunction is deemed to be due to
erroneous handling by the customer.
■When exposed to water
Using the K012 while wetted may allow water to collect in the microphone,
temporarily affecting speaker sound or getting clothing, carrybag, etc. wet. Water
may also enter by gaps in the hinge, charging terminal, etc. Remove water from
the cell phone with the following steps.
1Carefully wipe away all water
on the cell phone with a lint-
free, clean, dry cloth.
Table of contents
Other AU Cell Phone manuals

AU
AU A1304T Installation guide

AU
AU Infobar C01 Installation guide

AU
AU TORQUE G04 Service manual

AU
AU Torque G03 Installation guide

AU
AU Urbano L01 Installation guide

AU
AU INFOBAR A03 Installation guide

AU
AU Gratina Installation guide

AU
AU Aquos SHL25 Quick start guide

AU
AU Urbano V02 User manual

AU
AU Digno M Installation guide

AU
AU AQUOS SHV32 Installation guide

AU
AU Basio 2 Installation guide

AU
AU Isai LGL22 Service manual

AU
AU Samsung Galaxy S II WiMAX ISW11SC Installation guide

AU
AU Aquos Serie miniSHV31 Service manual

AU
AU AQUOS SHV31 Quick start guide

AU
AU AQUOS PHONE IS12SH Installation guide

AU
AU K002 User manual

AU
AU IS03 Installation guide

AU
AU K002 User manual