Audio Technica ATUC-50DUA User manual

ATUC-50
Digital Wired Conference System
ATUC-IR
Hybrid Infrared Conference System
Instruction Manual - Web Remote Edition -
Gooseneck Microphone with LED Ring
ATUC-M43H/58H/M32L
Discussion Unit
ATUC-50DU/ATUC-50DUa
Interpretation Unit
ATUC-50INT
Control Unit
ATUC-50CU
Integration Unit
ATUC-50IU
Link Extender
ATLK-EXT165
Voting Unit
ATUC-VU
Gooseneck Microphone with LED Ring
ATUC-M43H/58H/M32L
IR Discussion Unit
ATUC-IRDU
Hybrid Control Unit
ATUC-IRCU
Hybrid Control Unit (Dante-Enabled)
ATUC-IRCUDAN
IR Transmitter Unit
ATUC-IRA
IR Distributor
ATUC-IRD
Charger
ATCS-B60

2
Table of Contents
Introduction .......................................... 3
About this manual..................................................3
About the information in this manual ..................................... 3
About the configuration of this manual................................... 3
About registered trademarks and copyrights .......................... 3
Preparing to use Web Remote ...............................4
What is Web Remote?............................................................... 4
Setting up “Locate”................................................................... 4
Configuring and Operating Conferences
Using the Web Remote Control
Function................................................. 5
About Web Remote ................................................5
Overall structure of Web Remote ............................................ 5
Starting up Web Remote and preparing for
operations ..............................................................6
Starting up and logging in to Web Remote.............................. 6
About Web Remote Home screen............................................ 6
Configuring detailed system settings
([Settings & Maintenance])....................................7
How to operate the [Settings & Maintenance] menu ............. 7
Menu item ①([System Settings]) .......................................... 8
Menu item ②([Install Settings]).......................................... 16
Accessing your presets ([Presets]) ........................................ 30
Log management ([Logging]) ............................................... 30
Displaying the system information ([System Info])............. 30
Preparing for conferences
([Setup Conference]) ............................................31
1Recalling the preset ([Recall Preset]) ............................. 31
2Changing the conference settings
([Conference Settings]) ................................................... 31
3Adjusting the DU/IU settings
([DU/IU Settings], [DU/IU Detail Settings]) ............... 32
Operating and controlling conferences
([Start Conference]) .............................................33
1Operating conferences ([Conference Manager])............ 33
2Configuring the advanced audio-related settings and
performing audio operations ([Audio Control]) ............ 34
3Configuring conference settings
([Conference Settings]) ................................................... 34
Information.......................................... 35
Troubleshooting...................................................35
Error messages .....................................................36

3
Introduction
About this manual
About the information in this manual
The images and screenshots shown in this manual may differ from
the actual product.
About the configuration of this manual
The “Web Remote Edition” instruction manual explains how to use
Web Remote. Refer to the “Main Unit Edition” for information
about the digital wired conference system ATUC-50 and the hybrid
infrared system ATUC-IR products.
Device names
The device names are abbreviated as follows.
• 50CU: “Control Unit” ATUC-50CU
• 50DU: “Discussion Unit” ATUC-50DU/ATUC-50DUa*
• 50INT: “Interpretation Unit” ATUC-50INT
• ATUC-M: “Gooseneck Microphone with LED Ring” ATUC-
M43H/ATUC-M58H/ATUC-M32L
• 50IU: “Integration Unit” ATUC-50IU
• EXT: “Link Extender” ATLK-EXT165
• VU: “Voting Unit” ATUC-VU
• IRCU: “Hybrid Control Unit” ATUC-IRCU
• IRCUDAN: “Hybrid Control Unit (Dante-Enabled)” ATUC-
IRCUDAN
• IRDU: “IR Discussion Unit” ATUC-IRDU
• IRA: “IR Transmitter Unit” ATUC-IRA
• IRD: “IR Distributor” ATUC-IRD
• B60: “Charger” ATCS-B60
* The ATUC-50DUa is a conference microphone unit that is
compatible with the ATUC-VU (Voting Unit).
Some abbreviated names are used as follows.
CU: When indicating the ATUC-50CU, ATUC-IRCU, and ATUC-
IRCUDAN collectively
DU: When indicating both the ATUC-50DU/ATUC-50DUa and
the ATUC-IRDU
Symbols
➤
Indicates the page(s) where you can find more detailed
or related information.
NOTICE Indicates a risk that may result in malfunction or damage
to the device.
Indicates supplementary information as well as tips &
advice for operations.
[ ] Indicates menu items on the Web Remote screen.
Operations on mobile devices
Operations in this manual assume that you are using a computer as a
control device. Alternatively you can use a mobile device such as a
tablet. Instead of clicking or double-clicking, operate the application
by tapping.
About registered trademarks and
copyrights
• Apple, the Apple logo, iPad and Mac OS are trademarks of Apple
Inc., registered in the U.S. and other countries. App Store is a
service mark of Apple Inc.
• Google Play and the Google Play logo are registered trademarks
or trademarks of Google Inc.
• Other product names, service names, logos and/or company
names used in this manual are trademarked and copyrighted
properties of their respective owners and/or licensors.
In this manual, the TM and ®mark may not be specified.

4
Preparing to use Web Remote
What is Web Remote?
Web Remote is a web application to control this system.
Using Web Remote enables you to remotely perform the following
operations from a computer or mobile device (hereinafter, control
device):
• Preparing for conferences
• Operating and controlling conferences
• Configuring detailed settings
After connecting the CU to the control device, download “Locate”.
Using “Locate” enables you to simply access Web Remote
(
➤
page6) without typing the IP address of the installed CU.
• You can also start up Web Remote without using
“Locate” (
➤
page6).
Operating Environment for Web Remote and “Locate”
• Microsoft Windows 7 or later
• Apple OS X10.12 Sierra or later
• Android OS5.0 or later
• iOS9 or later
Recommended web browser for Web Remote
• Microsoft Internet Explorer 11 (Windows)
• Google Chrome ver. 57 or later (Windows and Android)
• Mozilla Firefox ver. 52 or later (Windows)
• Safari 10 or later (OS X and iOS)
NOTICE • Up to 3 control devices can simultaneously log in to Web
Remote.
When 2 web browsers are running on a control device,
Web Remote counts the web browsers as 2 separate
devices.
• When you have finished with Web Remote, be sure to log
out of Web Remote before closing the web browser
window.
If you simply close the window without logging out, you
will remain logged in to Web Remote for 5 minutes until
the session times out.
Setting up “Locate”
1Download the “Locate” installer onto the control
device.
For Windows/Mac users:
Download the “Locate” installer that applies to your country/
region from the Audio-Technica website:
http://www.audio-technica.com/world_map/
Proceed to step 2.
For iOS users:
Search from App Store and install “Locate”.
Proceed to step 4.
For Android users:
Search from Google Play and install “Locate”.
Proceed to step 4.
2Double-click “setup.exe” downloaded.
The setup wizard will appear.
3Follow the on-screen instructions to install
“Locate” onto the control device.
After the installation is complete, the “Locate” icon will appear
on the desktop.
4Check that the CU and the control device are
connected to the same network, and that the
power of the CU is ON, then double-click the
“Locate” icon.
“Locate” starts up. CUs connected to the network are detected
automatically.
5Select the CU you want to control via Web
Remote, then click [Open].
The Web Remote login screen appears.
• When the [Identify] icon is clicked, the icon lights red
and the indicators blink on the front panel of the selected
CU. This function is useful if there are multiple CUs in
the system and you want to identify a CU, such as when
you select the CU you want to control from the CUs
displayed in the “Locate” list.

5
Configuring and Operating Conferences Using the Web
Remote Control Function
About Web Remote
Overall structure of Web Remote
From the Home screen below, you can access the 3 main menus.
3. Operating and
controlling conferences
(Start Conference)
→Select this to start a
conference using the
current settings.
1. Configuring detailed
settings of the system
(Settings & Maintenance)
2. Preparing for conferences (Setup Conference)
→Select this to recall and adjust the preset settings as
necessary before starting a conference.
1. Configuring detailed settings of the system
(Settings & Maintenance) (
➤
page7):
Under [Settings & Maintenance], the following 5 sub-menus are
available for configuring detailed settings of the entire system.
[System Settings] (
➤
page8)
Allows you to set the unit name and a login password as well as
access authority setting, and configures network-related
settings.
You can also update the firmware from here.
[Install Settings] (
➤
page16)
Allows you to select conference mode (
➤
page20).
You can also configure advanced CU audio input/output
settings and recording settings.
Furthermore, you can configure DU detail settings, such as
speaker settings and LED color, for each DU and the
interpretation settings for each INT.
[Presets] (
➤
page30)
Allows you to save settings configured from [Install Settings] as
presets and to recall those settings. You can also export the
desired preset setting and import it to another CU.
[Logging] (
➤
page30)
Allows you to turn the logging function on/off and download a
log file.
[System Info] (
➤
page30)
Displays the network setting information and firmware version.
2. Preparing for conferences (Setup Conference)
(
➤
page31):
Follow the 3 steps below to prepare for a conference.
[Recall Preset] (
➤
page31)
Select the desired preset conference setting according to the
upcoming conference.
To handle many different types of conferences using one
conference system, it is recommended to preset multiple types
of conference settings.
[Conference Settings] (
➤
page31)
According to the upcoming conference, set the [Conference
Mode] (
➤
page20), which defines the talk method, and then
configure the detailed settings.
[DU/IU Settings] (
➤
page32)
For each DU/IU connected to the system, set the attendee name
and configure the audio settings and priority setting.
3. Operating and controlling conferences (Start
Conference) (
➤
page33):
Operate and control the conference by switching the screen
among the following 3 screens.
[Conference Manager] (
➤
page33)
Displays an attendee (DU) list. The list shows information
including the attendee names, priority setting status and talk
request status. Furthermore, you can permit the attendees to
talk.
[Audio Control] (
➤
page34)
Configure the primary output settings and perform audio-
related operations such as buzzer playback and conference
recording operations.
[Conference Settings] (
➤
page34)
You can change detailed settings such as conference mode even
during the conference.