Audiovox MM801 User manual

MM801
8.4” LCD OVERHEAD MONITOR
OPERATIONMANUAL
POWER
MENU/
ENTER
ON OFF AUTO
UP
DOWN

Important Notice
AnLCD paneland/or videomonitor maybe installedin amotor vehicleand visibleto the
driver if the LCD panel or video monitor is used for vehicle information, system control,
rear or side observation or navigation. If the LCD panel or video monitor is used for
televisionreception, videoorDVD play,the LCDpanelor videomonitormustbeinstalled
sothat thesefeatureswill onlyfunctionwhenthevehicleisin“park” orwhenthe vehicle’s
parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that
operates when the vehicle is in gear or when the parking brake is not applied must be
installedto therear ofthe driver’sseat whereitwill notbe visible,directly orindirectly, to
the operator of the motor vehicle. It is unlawful in most jurisdictions for a person to drive
a motor vehicle which is equipped with a screen that is located in the motor vehicle at
any point forward of the back of the driver’s seat, or that is visible, directly or indirectly,
to the driver while operating the vehicle. In the interest of safety, the MM801 should
never be installed where it will be visible, directly or indirectly, by the operator of the
motor vehicle. Warnings
Do not use any solvents or cleaning materials when cleaning the video monitor.
Do not use any abrasive cleaners,
Safety Precaution
For safety reasons, when changing video media it is recommended that the vehicle is
not in motion, and that you do not allow children to unfasten seatbelts to change tapes
or make any adjustments to the system. System adjustments can be accomplished
usingtheremote controlunit, whileseatbelts remainfastened. Enjoyyour Movies2 Go
entertainment system but remember-safety of all passengers remains the number
one priority.
Licensedunderoneormoreofthefollowingpatents,
PatentNOS. 5,775,762 and 5,927,784

Congratulations on your purchase of the Movies 2 Go MM801 drop-down Video
Monitor. The MM801 has been designed to give you and your family many
years of video entertainment in the mobile environment. Please read the
directions that follow to familiarize yourself with the product and to ensure
that you obtain the best results from your equipment.
NOTE: Installation options vary, see the individual owner’s manuals for
each component in your system to obtain a full understanding of each
component’s operation.
FEATURES
!8.4”TFT(ThinFilmTransistor)ActiveMatrixLCD(Liquid
CrystalDisplay)Monitor
!OSD(OnScreenDisplay)forControlofPictureQualityand
Functions
!InfraredTransmitterforOptionalIRWirelessHeadphones
!TwoAudio/VideoSourceInputs
!PowerON/OFF
!DomeLightswithBuilt-inThreeWaySwitch
!VideoDisplayON/OFFControl(whenLCDPanelisOpened
andClosed)
!FullFunctionRemoteControl

4MM801
FRONTPANELFEATURES
POWER
MENU/
ENTER
ON OFF AUTO
AUX
21
33
4
5
67 8
10
9
11

5MM801
1. Infrared Transmitter – Used to transmit audio to wireless headphones.
2. Remote Sensor – For Remote Control to operation of the MM801.
3. Dome Lights – Provide additional interior illumination.
4. Three Position Dome Light Switch
• Auto – Automatically switches on the dome lights in conjunction with the
vehicle’sinteriorillumination.
• Off – The Dome lights will not turn on in this position.
• On – Turns on the Dome lights.
5. Power ON/OFF – Turn the MM801 on and off.
6. Menu/Enter Button – Pressing this button will display the OSD menu
(Brightness, Contrast, Color, Tint & Reset). After accessing the menu, it is
used as the Enter function.
7. Select Up Button – Select menu item, source selection and adjust picture
quality.
8. Select Down Button – Select menu item, source selection and adjust
picturequality.
9. Screen Release – Slides in the direction of the arrow to release the drop
down screen.
10. LCD Panel – Display the video source and the On Screen Displays (OSD).
11. AUX –AUX Input jack.
FRONT PANEL

6MM801
TURNING THE MM801 ON OR OFF
1. Sliding the screen release lock forward will unlock the LCD screen and drop
downslightly. Move thescreendownward andpivotituntilacomfortableviewing
angle is reached. The internal friction detent will hold the screen in position
while the system is in use.
2. Press the power button to turn on the MM801.
3. After the unit is turned ON and begins to display a picture, adjust the viewing
angle by pivoting the screen to optimize the picture quality. (NOTE: The video
source (DVD/VCP/Game will need to be turned on also).
4. Remember to turn the unit OFF and pivot the LCD to the locked position when
not in use.

7MM801
OPERATION
OVERHEAD DOME LIGHTS
The Dome Lights integrated into the MM801 are controlled by a three position slide
switch. Sliding the switch to the ON position will turn the lights ON. The OFF
position will prevent the lights from turning ON with the vehicle’s interior lighting,
and the auto position will allow the lights to turn ON and OFF with the vehicle’s
interior lighting. Do not leave the vehicle unattended with the dome light switch in
the ON position as this could result in a discharged battery.
Consult the Installation Manual for dome light wiring information.
POWER
MENU/
ENTER
ON OFF AUTO
Dome
Light
Switch

8MM801
REMOTE CONTROL SENSOR
TheMM801incorporatesaninfrared sensorwillrelay signalsfromthe remotecontrol
to allow a source connected to theAV1 input to be controlled simply by pointing its
remotecontrol at theremote sensoreye. This providescontrolofsourceequipment
such as a Video Cassette Player or DVD Player. The infrared sensor can relay
signals from most manufacturer’s remote controls to its respective component
connected to the AV1 input, such as a DVD player. In this case you must use the
remote control supplied with the DVD player.
POWER
MENU/
ENTER
ON OFF AUTO
Remote Control Sensor Infrared Transmitter

9MM801
LCD SOURCE
MENU/
ENTER
V
CP
STOP
PLAY
REW FWD
1
4
5
7
10
2
3
6
8
9
1 LCD : Power On / Off Button for the MM801 monitor
2 VCP : Power On / Off Button for an OptionalAudiovox VCP
3 SOURCE : Button for selection ofAV1 andAUX
4 MENU/ENTERButton
5 – : Select Down Button
6 + : Select Up Button
7 REW : ........Rewinds Tape
8 FWD : ........ Fast Forwards Tape
9 STOP : ........Stops Tape
10 PLAY : ........ Plays Tape
REMOTE CONTROL UNIT BUTTONS CONTROLS

10 MM801
PICTURE ADJUSTMENT
When watching the program, the quality of the picture can be adjusted to your
preference.
Press the MENU button, the main menu
will appear. Then press the UP or DOWN
buttonto selectfrom pictureadjust, source
selection or display off. Press the MENU
button again to select the item. For
example: Press MENU button, highlight
PICTURE and press the MENU button to enter the picture adjustment menu. The
PICTURE menu will appear, highlight the item you want to adjust and press the
MENU button to enter. Then press the UP or DOWN button to adjust the selected
item.
Description of Adjustment Items:-
Item Press DOWN button Press UP button
To darken the picture
Decrease the contrast
for soft color
To decrease the color
intensity
Increase the greenish
skin tones
To brighten the picture
Increases the picture
contrast for vivid color
To increase the color
intensity
Inceases the redish skin
tones
To restore the factory settings, select RESET and press the UP or DOWN
button. All of the picture adjustments (BRIGHTNESS, CONTRAST, COLOR and
TINT) will return to the factory settings.
PICTURE
CONTRAST
COLOR
TINT
RESET
BRIGHTNESS 32
32
32
00
PICTURE
CONTRAST
COLOR
TINT
RESET
BRIGHTNESS
32
32
00
32
32 BRIGHTNESS 32 BRIGHTNESS
MENU
SOURCE
DISPLAY OFF
PICTURE
MENU
SOURCE
DISPLAY OFF
PICTURE
BRIGHTNESS
CONTRAST
COLOR
TINT