August DVB400 User manual

DVB400 Set Top Box
Set Up Guide
Plugging In
Channel Scan
Recording TV

Check You Have All
the Components
•DVB400 Set Top
Box
•HDMI Cable
•Instruction
Manual
•Remote Control
(Under Card Flap
Inside)
•Batteries
•UK / EU Plug

Connect the
Power Adapter to
a mains outlet
and the rear of
the DVB400
Connecting your Device

OR
Connect the
HDMI or SCART to
the DVB400 and
to your TV /
Display
Connecting your Device

Connect an
aerial cable to
the RF IN port to
receive signal
from your aerial
No Aerial Cables
need to connect
to your TV!
Connecting your Device

Insert the batteries into the remote
and Power On the Set Top Box
Connecting your Device

The Device will launch
the Installation Guide
Make
sure Language
is Correct and
Press "Channel
Search"
First Time Set Up and Channel Scan

Wait for the scan to complete
First Time Set Up and Channel Scan

Recording with a USB
Insert a USB Stick
(Minimum 32GB)
or External Hard
Drive (Maximum
1TB) into the front
of the box
Press the
Menu Button
This menu will open

Navigate to the
Media Player
Menu and Down
to PVR Settings
Now Select
Recording Device
and Check Your
Device Appears
Recording with a USB