August MR410 Administrator Guide

How-To Guide
August MR410 Bluetooth Audio Transmitter

Check You Have
All the
Components
•MR410 Transmitter
•USB to USB-C Adapter
•Instruction Manual

Ensure You Have The
Adapter, USB-C or USB
Audio Source, and
Wireless Headset /
Speaker / Earphones
•This Transmitter will allow Non-
Bluetooth games consoles,
phones, and other USB / USB-C
Devices to play audio wirelessly
on Bluetooth Headphones,
Earphones, Speakers...

Choose USB-
C or USB
Use the included adapter to
change from USB-C to USB if
needed

Find the USB or USB-C Port on Your Device
The USB Port will look like this The USB-C Port will look like this

Enter Pairing Mode
•Use The Circular Buttons To Begin Pairing a Device
•Keep your Device close during pairing
•Ensure the Headphones, Earphones, Speaker etc. is also in pairing
mode according to its own instructions

Pass Through
Charging
To use Pass Through Charging Plug
a USB-C charging cable in to the
USB-C port on the MR410, while it
is already inserted into your Switch,
phone, etc.

Disconnect all Devices
To disconnect all paired devices hold the Bluetooth pairing buttons for
~ 5 Seconds
Hold