
Ajustes Settings
Para cualquier modiicación, en caso de un sistema pulsadores, se necesitará conectar una placa teclado o un teclado MINI
(730165).
To any modiication, in case of push-buttons system, you’ll need to connect a keyboard panel or a MI I keyboard (730165).
NUMERO DE PLACA
1
AUTOENCENDIDO si
Pulsador C J:
0
¿ olo pulsadores ?
No L 0
¿ Planta - Puerta ?
No
NUEVO COD ACCE O
CONFIG: 1
CODIGO APERT. 1
101010
TIEMPO APERT. 1
2 seg
Siguiente menú
ext menu
alidar_Cambiar
Validate_Change
Información del código de placa conigurado en el switch binario
Panel code information conigured on the binary switch
La placa permite el auto-encendido desde viviendas, defecto SI
The panel allows the self-starting from lats, default YES
Seleccionaremos una posición de pulsador que efectuará una llamada directa a
conserjería. En sistemas con placas de teclado + pulsadores será desde 1 a 12
(A_B_C_D_E_F_G_H_I_J_K_L). En sistemas con placas de pulsador será desde 1 a 66
(plantilla de pulsadores, página 10).
We will select a push button position that will make a direct call to the concierge.
In systems with keyboard panel + push-buttons it will be from 1 to 12
(A_B_C_D_E_F_G_H_I_J_K_L). In systems with push-button panels it will be from 1 to
66 (push button template, page 10).
Permite conigurar sistemas de placas de pulsador (página 8).
* También en esta pantalla si pulsamos 5 activaremos la tabla LARGA “L”, página 7.
* También en pantalla si pulsamos 0 activaremos la planta CERO “0” (0A, 0B, ...).
Allows to conigure systems with push-buttons panels (page 8).
* Also in this screen if we press 5 we will activate the LARGE table “L”, page 7.
* Also in this screen if we press 0 we will activate the loor ZERO “0” (0A, 0B, ...).
Permite modiicar el texto del display, en lugar de “Piso-Letra” el sistema mostrará el
texto “Planta-Puerta."
Allows to modify the text in the display, instead of show “Floor-Letter” the system will
show the text “”Plant-Door”.
NUE O COD ACCESO CONFIG: 1 cambia el código de acceso al menú coniguración.
EW ACCESS CODE CO FIG: 1 changes the access code for the coniguration menu.
Código de apertura 1 (101010) ( 0, desactivado)
Código de apertura 2 (202020) ( 0, desactivado)
Código de apertura 3 (303030) ( 0, desactivado)
Código de apertura 4 (404040) ( 0, desactivado)
Opening code 1 (101010) ( 0, disabled)
Opening code 2 (202020) ( 0, disabled)
Opening code 3 (303030) ( 0, disabled)
Opening code 4 (404040) ( 0, disabled)
Tiempo de apertura 1 (2 seg) (apertura desde vivienda)
Tiempo de apertura 2 (5 seg) (apertura desde pulsador B+ y B-)
Opening time 1 (2 sec) (opening from lat)
Opening time 2 (5 sec) (opening from push-button B+ y B-)
Como activar apertura
How to activate the opening
cod. seleccionado
selected code