AVA WEIGH PCS15K User manual

2/2022
1
334PRINTER
• This Quick Set-Up Guide will connect the Avaweigh (PCS15K, PCS40/PCS40T, & PCS60K/PCS60TK)
to the Avaweigh Printer (OS-2130D) using default sengs, allowing for quick set-up and prinng.
Addional set-up opons can be found on pages 11-13 in the scale manual.
1. Connect RS232 to scale and printer:
Use the RS232 cable that came with the printer and connect it to the RS232 inserts that are
located on the back of the printer and the le side of the scale.
2. Power on the scale:
Locate the power switch on the right side of the machine and toggle it to the on posion.
Wait about 5 seconds for the scale to load and calibrate.
3. Geng to setup mode:
Press the red power buon and the number 4 simultaneously for a few seconds unl the
machine beeps. You are now in setup mode.
4. Label Length:
Unit price screen should read ‘232.oUt.’ Once you have confirmed you are on the label length
screen please select the number associated with the length and type of label you will be using.
• Press 1: 40mm length/ date will print on label
• Press 2: 60mm length/ date will print on label
• Press 3: 40mm length/ NO DATE will print on label
• Press 4: 60mm length/ NO DATE will print on label
• Press Enter to confirm your selecon.
5. Bits Per Second Connecon:
Unit price screen should read ‘232.bPs,’ confirming that you are on the BPS screen.
• Press 4: (9600bps)
• Press Enter to confirm your selecon.
6. Data Type:
Unit price screen should read ‘232.dFt,’ confirming that you are on the data type screen.
• Press 1: (8N1 8 bits data)
• Press Enter to confirm your selecon
7. Date Format:
Unit price screen should read ‘Prtd.dt,’ confirming that you are on the date format screen.
• Press 1: (DD-MM-YY)
• Press Enter to confirm your selecon
QUICK SETUP GUIDE
CONNECTING YOUR AVAWEIGH PRINTER (OS-2130D)
TO THE AVAWEIGH PCS15K, PCS40/PCS40T, & PCS60K/PCS60TK SCALE
SCALE CONNECTION

2
• Once this process has been completed the scale will reset itself and will now be connected to
the printer. For more detailed informaon about connecon opons such as barcode formats,
date layouts and bps communicaons please refer to pp. 11-13 in the scale manual.
8. Printer Connecon:
Unit price screen should read ‘USb.oUt’ total price screen will read ‘HOST,’ confirming you are
on the printer connecon screen.
• Press Enter to confirm your selecon
9. Bits Per Second Connecon:
Unit price screen should read ‘USb.bPs,’ confirming you are on the BPS screen.
• Press 4: (9600bps)
• Press Enter to confirm your selecon
10. Data Type:
Unit price screen should read ‘USb.dFt,’ confirming you are on the data type screen.
• Press 1: (8N1 8 bits data)
• Press Enter to confirm your selecon
11. Department Code:
Unit price screen will read ‘d.CodE’ confirming you are on the department code screen.
• Choose a desired two-digit department code between (00-99). (Example: 08)
This will show as the prefix of barcodes.
• Press Enter to confirm your selecon
12. Barcode Format:
Unit price screen will read ‘b.Prt.FE,’ confirming you are on the barcode format screen.
• Press any two digits between 00-13 to select a barcode format.
05 is the recommended barcode format.
• Press Enter to confirm your selecon
13. Finish:
Unit price screen will read ‘Urt.CFt’ confirming that you are on the final screen.
• Press 2 to finish
• Press Enter to confirm your selecon
PRINTER CONNECTION