Avanti AV-HVLP-5S Assembly instructions

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20l
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
NOTICE
;<6=>%?@@6A?=B6<C
;7*,8%$.*%D/(,E%F'8%
?@@6A?=B6<C%,2$*(%6!6GC%
'#*%,89%).*8%"$%)"77%+*%"97*%
2&(%5&(*%$.,8%HI%5"8'$*#1
A*7,E*9%&(%"8,9*J',$*%
47*,8"83%)"77%/*(5,8*8$7E%
47&3%$.*%D/(,E%F'81

Page 2 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
B,+7*%&2%;&8$*8$#
Safety .......................................................................2
Specifications ...........................................................7
Setup ........................................................................8
Operation .................................................................10
Maintenance ............................................................16
Parts Lists and Diagrams ........................................22
Warranty ..................................................................24
Y=G>?>F%DC@TW<D%=>A%A6K?>?B?W>D
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
?@UWGB=>B%D=K6BC%?>DBGX;B?W>D
U*(#&8,7%D,2*$E
1. D$,E%,7*($1%%Y,$4.%).,$%E&'%,(*%9&"83%,89%
'#*%4&55&8%#*8#*%).*8%&/*(,$"83%$.*%$&&71%%
A&%8&$%'#*%$.*%$&&7%)."7*%$"(*9%&(%'89*(%$.*%
"827'*84*%&2%9('3#L%,74&.&7L%&(%5*9"4,$"&81
A moment of inattention while operating the
tool increases the risk of injury to persons.
2. A(*##%/(&/*(7E1%%A&%8&$%)*,(%7&&#*%47&$."83%
&(%Z*)*7(E1%%;&8$,"8%7&83%.,"(1%%[**/%.,"(L%
47&$."83L%,89%37&\*#%,),E%2(&5%5&\"83%/,($#1
Loose clothes, jewelry, or long hair increases
the risk of injury to persons as a result
of being caught in moving parts.
3. A&%8&$%&\*((*,4.1%%[**/%/(&/*(%
2&&$"83%,89%+,7,84*%,$%,77%$"5*#1
Proper footing and balance enables better
control of the tool in unexpected situations.

Page 3K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
4. X#*%#,2*$E%*J'"/5*8$1
Wear protective paint spraying
gloves and a NIOSH-approved
respirator during use.
Non-skid safety shoes and a hard
hat must be used for the applicable conditions.
5. =7),E#%)*,(%*E*%/(&$*4$"&81
Wear ANSI-approved safety goggles.
B&&7%X#*%,89%;,(*
1. A&%8&$%2&(4*%$.*%$&&71 Use the correct tool for the
application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
b. X8/7'3%$.*%$&&7%+*2&(*%5,V"83%,8E%,9Z'#$5*8$#L%
4.,83"83%,44*##&("*#L%&(%#$&("83%$.*%$&&71
Such preventive safety measures reduce the risk of
starting the tool unintentionally. Turn off unplug the
sprayer, safely discharge any residual air pressure,
and release the throttle and/or turn the switch to
its off position before leaving the work area.
c. D$&(*%$.*%$&&7%).*8%"$%"#%"97*%&'$%&2%(*,4.%
&2%4."79(*8%,89%&$.*(%'8$(,"8*9%/*(#&8#1%%
A tool is dangerous in the hands of untrained users.
d. ;.*4V%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&\"83%
/,($#L%+(*,V,3*%&2%/,($#L%,89%,8E%&$.*(%4&89"$"&8%
$.,$%,22*4$#%$.*%$&&7]#%&/*(,$"&81%%If damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
There is a risk of bursting if the tool is damaged.
e. X#*%&87E%,44*##&("*#%$.,$%,(*%"9*8$"2"*9%+E%$.*%
5,8'2,4$'(*(%2&(%$.*%#/*4"2"4%$&&7%5&9*71 Use of
an accessory not intended for use with the specific
tool model, increases the risk of injury to persons.
D*(\"4*
a. B&&7%#*(\"4*%5'#$%+*%/*(2&(5*9%&87E%
+E%J',7"2"*9%(*/,"(%/*(#&88*71
b. Y.*8%#*(\"4"83%,%$&&7L%'#*%&87E%"9*8$"4,7%
(*/7,4*5*8$%/,($#1%%X#*%&87E%,'$.&("^*9%/,($#1
D/*4"2"4%D,2*$E%?8#$('4$"&8#
1. B&%(*9'4*%$.*%("#V%&2%*7*4$("4%#.&4VL%%
9&%8&$%*_/&#*%$&%(,"81%%D$&(*%"89&&(#1
2. G"#V%&2%6_/7&#"&8%`%%
A&%8&$%#/(,E%27,55,+7*%7"J'"9#1
3. A&%8&$%#/(,E%&(%47*,8%)"$.%7"J'"9#%.,\"83%
,%27,#.%/&"8$%7*##%$.,8%HOa;%bMIIaKc1
4. Connect to GFCI-protected outlet only.
5. Spray area must be well ventilated. Keep
turbine assembly in a well ventilated area
at least 20 feet (6.1m) from the spraying
area. Do not spray turbine assembly.
6. Follow instructiosn for fluid being sprayed.
7. Do not direct spray at people or animals.
8. Read all of the information concerning
coating products and cleaning solvents.
A&%8&$%'#*%4.7&("8,$*9%#&7\*8$#%
b*131%MNMNM%$("4.7&(&*$.E7*8*%,89%
9"4.7&(&5*$.,8*L%,7#&%V8&)8%,#%
5*$.E7*8*%4.7&("9*c%$&%47*,8%#/(,E%3'8#1%%
@,8E%#/(,E%3'8#%4&8$,"8%,7'5"8'5L%
)."4.%(*,4$#%#$(&837E%$&%4.7&("8,$*9%#&7\*8$#1%%
Contact the solvent or coating manufacturer as
needed regarding potential chemical reactions.
9. Risk of injection – Do not point spray gun at any
person or any part of the body. In case of skin
injection, seek medical attention immediately.
10. Spraying hazardous materials may result in serious
injury or death. Do not spray pesticide, acid,
corrosive material, fertilizer, or toxic chemicals.
11. Paints and solvents may be harmful or fatal if
swallowed or inhaled. Avoid prolonged skin
contact with solvents or paints as they will
irritate skin. After any contact, immediately
wash off exposed area with hot, soapy water.

Page 4 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
12. B&%(*9'4*%$.*%("#V%&2%*7*4$("4%#.&4V, do
not expose to rain. Store indoors.
13. Attach all accessories properly to the tool
before plugging in the tool. A loose accessory
may detach or break during operation.
14. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
15. Avoid unintentional starting. Prepare to
begin work before turning on the tool.
16. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
17. This product is not a toy.
Keep it out of reach of children.
18. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure. In
addition, people with pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect
to avoid electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
19. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
%D=!6%Bd6D6%?>DBGX;B?W>D1

Page 5K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
DE5+&7%A*2"8"$"&8#
DE5+&7 U(&/*($E%&(%D$,$*5*8$
!=; Volts Alternating Current
=Amperes
WARNING marking concerning
Risk of Eye Injury.
Wear ANSI-approved eye protection.
WARNING marking concerning
Risk of Respiratory Injury.
Wear NIOSH-approved respirator.
DE5+&7 U(&/*($E%&(%D$,$*5*8$
WARNING marking concerning
Risk of Explosion.
WARNING marking concerning Risk
of Fire.
Do not use solvents improperly.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.

Page 6 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
FGWX>A?>F%?>DBGX;B?W>D
B."#%/(&9'4$%5'#$%+*%3(&'89*91%?8%$.*%*\*8$%&2%,8%*7*4$("4,7%#.&($%4"(4'"$L%3(&'89"83%(*9'4*#%$.*%("#V%
&2%*7*4$("4%#.&4V%+E%/(&\"9"83%,8%*#4,/*%)"(*%2&(%$.*%*7*4$("4%4'((*8$1%B."#%/(&9'4$%"#%*J'"//*9%)"$.%,%
4&(9%.,\"83%,%3(&'89"83%)"(*%)"$.%,8%,//(&/(",$*%3(&'89"83%/7'31%B.*%/7'3%5'#$%+*%/7'33*9%"8$&%,8%
&'$7*$%$.,$%"#%/(&/*(7E%"8#$,77*9%,89%3(&'89*9%"8%,44&(9,84*%)"$.%,77%7&4,7%4&9*#%,89%&(9"8,84*#1
BW%UG6!6>B%6<6;BG?;%DdW;[%=>A%A6=Bd%KGW@%
?>;WGG6;B%FGWX>A?>F%Y?G6%;W>>6;B?W>-%
?5/(&/*(%"8#$,77,$"&8%&2%$.*%3(&'89"83%/7'3%"#%,+7*%$&%(*#'7$%"8%,%("#V%&2%*7*4$("4%#.&4V1%Y.*8%(*/,"(%

+7,9*%$*(5"8,71%B.*%)"(*%)"$.%"8#'7,$"&8%.,\"83%,8%&'$*(%#'(2,4*%$.,$%"#%3(**8%)"$.%&(%)"$.&'$%E*77&)%#$("/*#%
"#%$.*%3(&'89"83%)"(*1%%

'89*(#$&&9L%&(%).*8%"8%9&'+$%,#%$&%).*$.*(%$.*%/(&9'4$%"#%/(&/*(7E%3(&'89*91%A&%8&$%5&9"2E%$.*%/7'3%

F(&'89*9%B&&7#-%B&&7#%)"$.%B.(**%U(&83%U7'3#
This product is for use on a nominal 120-V circuit and
has a grounding plug similar to the plug illustrated in
HNU(&83%U7'3%,89%W'$7*$1 Only connect the product
to an outlet having the same configuration as the
plug. Do not use an adapter with this product.
FGWX>A6A%
WXB<6B
FGWX>A?>F%
U?>
HNU(&83%U7'3%,89%W'$7*$
1. Tools marked with “Grounding Required” have
a three wire cord and three prong grounding
plug. The plug must be connected to a properly
grounded outlet. If the tool should electrically
malfunction or break down, grounding provides
a low resistance path to carry electricity away
from the user, reducing the risk of electric shock.
bD**%HNU(&83%U7'3%,89%W'$7*$1c
2. The grounding prong in the plug is connected
through the green wire inside the cord to the
grounding system in the tool. The green wire
in the cord must be the only wire connected to
the tool’s grounding system and must never
be attached to an electrically “live” terminal.
bD**%HNU(&83%U7'3%,89%W'$7*$1c
3. The tool must be plugged into an appropriate outlet,
properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in the preceding illustration.
bD**%HNU(&83%U7'3%,89%W'$7*$1c

Page 7K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
6_$*8#"&8%;&(9#
1. Grounded tools require a three wire extension cord.
Double Insulated tools can use either a
two or three wire extension cord.
2. As the distance from the supply outlet increases,
you must use a heavier gauge extension cord.
Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of
power and possible tool damage. bD**%B,+7*%=1c
3. The smaller the gauge number of the wire, the
greater the capacity of the cord. For example,
a 14 gauge cord can carry a higher current
than a 16 gauge cord. bD**%B,+7*%=1c
4. When using more than one extension cord to make
up the total length, make sure each cord contains at
least the minimum wire size required. bD**%B,+7*%=1c
5. If you are using one extension cord for more
than one tool, add the nameplate amperes
and use the sum to determine the required
minimum cord size. bD**%B,+7*%=1c
6. If you are using an extension cord outdoors, make
sure it is marked with the suffix “W-A” (“W” in
Canada) to indicate it is acceptable for outdoor use.
7. Make sure the extension cord is properly wired
and in good electrical condition. Always replace
a damaged extension cord or have it repaired
by a qualified electrician before using it.
8. Protect the extension cords from sharp objects,
excessive heat, and damp or wet areas.
B,+7*%=-%%G*4&55*89*9%
@"8"5'5%Y"(*%F,'3*%

>=@6U<=B6
=@U6G6D
b,$%2'77%7&,9c
6eB6>D?W>%;WGA%
<6>FBd
fQg QIg RQg
MIIg MQIg
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 -
12.1 – 16.0 14 12 10 - -
16.1 – 20.0 12 10 - - -
h%T,#*9%&8%7"5"$"83%$.*%7"8*%\&7$,3*%9(&/%$&%
2"\*%\&7$#%,$%MQIi%&2%$.*%(,$*9%,5/*(*#1
D/*4"2"4,$"&8#
 
Electrical Rating  
Cup Capacity 32 fl. oz.
Tip Size 1.3mm 1.3mm & 1.8mm
>Wjj<6%;d=GB
Material Thickness
Nozzle Size Thin Medium Thick
0.8 mm X
1.3 mm X
1.8 mm X
2.2 mm X
dWXD6dW<A%XD6%W><C1

Page 8 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
D*$NX/-%T*2&(*%X#*
G*,9%$.*%6>B?G6%?@UWGB=>B%D=K6BC%?>KWG@=B?W>%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%5,8',7%
"847'9"83%,77%$*_$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
;&5/&8*8$#%,89%;&8$(&7#
D/(,E%
F'8
D$&(,3*
U&)*(%
D)"$4.
="(%K"7$*(%<"3.$%

="(%d&#*%
W'$7*$
B.*(5,7%
W\*(7&,9%
D)"$4.
=44*##&(E%
D$&(,3*
;&5/,($5*8$
="(%
;,/%
<&4V%
G"83
K7'"9%
>&^^7*
B("33*(
="(%
B'+*
<"9%
<&4V
K7'"9%
;&8$(&7%
[8&+
="(%?87*$%
;&'/7*(
="(%
;&8$(&7%
[8&+
;'/

Page 9K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
=##*5+7E
1. Thread Air Hose onto Spray Hose Outlet by
hand until secure. (58149 has additional
Whip Hose attached to end of Air Hose.)
="(%d&#*%
W'$7*$
2. Attach Spray Gun to Air Hose by pulling down
Coupler, inserting Spray Gun Coupler fully into
Air Hose, then releasing Coupler. Pull on Air
Hose to make sure Spray Gun is fully seated.
;&'/7*(
=44*##&(E%D$&(,3*%;&5/,($5*8$
Use compartment on back of Sprayer to store two Nozzle-Needle Sets and Nozzle Wrench.
>**97*#
="(%
;,/
="(%
;,/
>&^^7*
>&^^7*>&^^7*%
Y(*84.

Page 10 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
W/*(,$"83%?8#$('4$"&8#
G*,9%$.*%6>B?G6%?@UWGB=>B%D=K6BC%?>KWG@=B?W>%#*4$"&8%%
,$%$.*%+*3"88"83%&2%$."#%5,8',7%"847'9"83%,77%$*_$%'89*(%#'+.*,9"83#%$.*(*"8%%
+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
?8#/*4$%$&&7%+*2&(*%'#*L%7&&V"83%2&(%9,5,3*9L%7&&#*L%,89%5"##"83%/,($#1%%?2%,8E%/(&+7*5#%,(*%2&'89L%
9&%8&$%'#*%$&&7%'8$"7%(*/,"(*91%%A,5,3*9%&(%5"##"83%/,($#%4,8%"84(*,#*%("#V%&2%*7*4$("4%#.&4V1
T*2&(*%K"(#$%X#*%
BW%UG6!6>B%D6G?WXD%?>kXGC-%%A&%8&$%,9Z'#$%&(%$,5/*(%)"$.%,8E%4&8$(&7%&(%
4&5/&8*8$%"8%,%),E%8&$%#/*4"2"4,77E%*_/7,"8*9%)"$."8%$."#%5,8',71%%
?5/(&/*(%,9Z'#$5*8$%4,8%(*#'7$%"8%$&&7%2,"7'(*%&(%&$.*(%#*("&'#%.,^,(9#1
>WB?;6-%%T*2&(*%2"(#$%'#*L%47*,8%$.*%D/(,E%F'8%$.&(&'3.7E1%
?2%8&$%(*5&\*9L%$.*%5,$*(",7%'#*9%2&(%$*#$"83%,89%4&((&#"&8%/(*\*8$"&8%)"77%4&8$,5"8,$*%/,"8$1%
Y&(V/"*4*%,89%Y&(V%=(*,%D*$%X/
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Before spraying, mask nearby objects not being
sprayed and lay cloths (not included) on the floors.

Page 11K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
U(*N;7*,8"83
G?D[%WK%6eU<WD?W>%N%%
AW%>WB%DUG=C%K<=@@=T<6%<?lX?AD1
a. K&77&)%#&7\*8$%5,8'2,4$'(*(]#%47*,8%'/%
"8#$('4$"&8#%,89%#,2*$E%/(*4,'$"&8#1
b. ?2%4&77*4$"83%27'#.*9%#&7\*8$#%"8%
5*$,7%4&8$,"8*(L%$(,8#2*(%$&%8&85*$,7%
4&8$,"8*(L%,89%27'#.%5*$,7%4&8$,"8*(1
c. Y&(V%2,(%,),E%2(&5%,8E%"38"$"&8%
#&'(4*#%"8%,%\,/&(%2(**%,(*,1
d. [**/%47,##%=T;%2"(*%*_$"83'"#.*(%8*,(+E1
Y=G>?>Fm%%BW%UG6!6>B%D6G?WXD%?>kXGC-%%A&%8&$%#/(,E%&(%47*,8%
)"$.%7"J'"9#%.,\"83%,%27,#.%/&"8$%7*##%$.,8%HOa;%bMIIaKc1%%
W87E%'#*%),$*(%&(%5"8*(,7%#/"("$#%2&(%/("5"83%,89%47*,8"831%%%
W87E%'#*%),$*(N+,#*9%&(%&"7N+,#*9%/,"8$%2&(%#/(,E"831
>WB?;6-%%A&%8&$%"55*(#*%D/(,E%F'8%T&9E%"8%#&7\*8$1%%A&%8&$%,77&)%#&7\*8$%$&%*8$*(%$.*%,"(%"87*$1
1. Designate a container for waste.
2. Remove Cup and fill with mineral spirits
(sold separately) until a quarter full.
3. Replace Cup.
4. Turn Air Control Knob clockwise until
it stops. It will be fully open.
5. Turn Fluid Control Knob counterclockwise
until two threads are showing.
K7'"9%
;&8$(&7%
[8&+
="(%
;&8$(&7%
[8&+
6. Plug Sprayer into grounded 120VAC
outlet, then turn Sprayer on.
7. Point Spray Gun at interior side of waste container.
Depress Trigger and slightly shake Spray Gun
while spraying solvent into the container.
8. Turn off and unplug Sprayer, point Spray Gun
into waste container and depress Trigger again
to make sure no air pressure remains.
9. Remove Cup and Lid, wipe with
clean cloth, and allow to dry.
10. Turn Lock Ring counterclockwise by hand to
remove, then remove Air Cap, Air Valve, and
Spring (58149 only) and allow them to dry.
<&4V%
G"83
="(%
!,7\*
D/("83%

="(%
;,/
11. Reassemble Spray Gun.
>WB?;6- A&%8&$%'#*%,8E%V"89%&2%7'+("4,8$1%%B.*%
7'+("4,8$%)"77%5"_%)"$.%/,"8$L%4,'#"83%/&&(%(*#'7$#1
Y,#$*%A"#/&#,7
After cleaning, dispose of waste according to the solvent manufacturer’s
directions and local hazardous waste standards.

Page 12 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
D/(,E%F'8%D*$'/%,89%=9Z'#$5*8$
BW%UG6!6>B%D6G?WXD%?>kXGC-%%A&%8&$%,9Z'#$%&(%$,5/*(%)"$.%,8E%4&8$(&7%&(%
4&5/&8*8$%"8%,%),E%8&$%#/*4"2"4,77E%*_/7,"8*9%)"$."8%$."#%5,8',71%%
?5/(&/*(%,9Z'#$5*8$%4,8%(*#'7$%"8%$&&7%2,"7'(*%&(%&$.*(%#*("&'#%.,^,(9#1
G?D[%WK%6eU<WD?W>%N%%
AW%>WB%DUG=C%K<=@@=T<6%<?lX?AD1
Y=G>?>Fm %BW%UG6!6>B%D6G?WXD%?>kXGC-%%A&%8&$%#/(,E%&(%47*,8%
)"$.%7"J'"9#%.,\"83%,%27,#.%/&"8$%7*##%$.,8%HOa;%bMIIaKc1
W87E%'#*%),$*(%&(%5"8*(,7%#/"("$#%2&(%/("5"83%,89%47*,8"831%%%
W87E%'#*%),$*(N+,#*9%&(%&"7N+,#*9%/,"8$%2&(%#/(,E"831
U,"8$%U(*/,(,$"&8%,89%K"77"83
>&$*- Proper paint mixture is essential. Follow paint
manufacturer’s directions for thinning.
Most paints will spray easily if they are thinned properly.
1. Thin paint according to manufacturer’s
directions and mix thoroughly.
2. Remove Cup.
3. Carefully strain the paint into the Cup
through a paint strainer or a piece of
cheesecloth. Fill the Cup 3/4 full.
4. Replace Cup.
U,"8$
K,8%U,$$*(8
1. To change fan pattern:
a. Lock Ring will be loose. Keep
Fluid Nozzle flush with Air Cap unless adjusting
Pattern (see Pattern Adjustment (58149
only) on page 14). Turn Air Cap clockwise
until desired fan pattern is selected.
="(%
;,/%
<&4V%
G"83
K7'"9%
>&^^7*
b.  Loosen Lock Ring by hand until
Air Cap moves freely in clockwise direction,
then Turn Air Cap clockwise until desired
fan pattern is selected. Tighten Air Cap.
d&("^&8$,7;&8* !*($"4,7

Page 13K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
K7'"90="(%=9Z'#$5*8$
1. Turn Air Control Knob clockwise until
it stops. It will be fully open.
2. Turn Fluid Control Knob counterclockwise
until two threads are showing.
3. Plug Sprayer into grounded 120VAC
outlet, then turn Sprayer on.
4. Spray on piece of scrap material in short
bursts, then check consistency.
5. If necessary, slowly adjust Fluid Control Knob
and/or Air Control Knob, then spray on scrap
material until desired consistency is achieved.
6. If paint is too thick, thin paint according
to manufacturer’s instructions and
repeat instructions above.
K7'"9%
;&8$(&7%
[8&+
="(%
;&8$(&7%
[8&+

Page 14 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
D/(,E"83
G?D[%WK%6eU<WD?W>%N%%
AW%>WB%DUG=C%K<=@@=T<6%<?lX?AD1
Y=G>?>Fm %BW%UG6!6>B%D6G?WXD%?>kXGC-%%A&%8&$%#/(,E%&(%47*,8%
)"$.%7"J'"9#%.,\"83%,%27,#.%/&"8$%7*##%$.,8%HOa;%bMIIaKc1
W87E%'#*%),$*(%&(%5"8*(,7%#/"("$#%2&(%/("5"83%,89%47*,8"831%%%
W87E%'#*%),$*(N+,#*9%&(%&"7N+,#*9%/,"8$%2&(%#/(,E"831
U(&/*(%D/(,E"83%B*4.8"J'*#

9&)8%2(&5%$.*%)&(V/"*4*1%%[**/%;'/%
2'77L%"2%D/(,E%F'8%#/'$$*(#L%(*2"77%;'/1
45°
%
?84&((*4$%
F'8%
=837* Do not pivot your wrist or
wave the gun like a fan.
;&((*4$%F'8%=837*
Move your arm, not just your wrist.
Point gun directly towards the surface and
maintain an even, steady distance and speed.

While Spray Gun is facing forward
and Trigger is released:
a. To increase pattern size, turn Air Cap clockwise.
b. To decrease pattern size, turn
Air Cap counterclockwise.
B&%=\&"9%U,"8$%T'"79%X/
Apply two thin coats rather than one thick
coat. Overlap 1/3 to 1/2 on second coat.
Start moving the Spray Gun before
fully depressing Trigger.
Fully depress Trigger before
contacting the workpiece.
When finished with the stroke, release the
Trigger while still moving the Spray Gun
and after passing the workpiece.
1. Depress Trigger fully and move Spray Gun
in parallel strokes to the workpiece.
2. Keep the distance from the

>&$*- Do not stop moving the Spray Gun
while spraying. If the Spray Gun stops even briefly
while spraying the paint will build up and run down the
workpiece.
To avoid clogs, check Fluid Nozzle regularly for
dried paint and remove with a cloth as needed.
>&$*- The motor has thermal overload protection. If
unit overheats, allow approximately 30 minutes for unit
to cool, then press Thermal Overload Switch.
If Air Filter Light (58149 only) comes on, check Air Filters
accoring to Air Filter Maintenance on page 17.
>&$*- The stroke speed and
Fluid Control Knob adjustment will determine
how much paint is being applied.
3. To prevent accidents, after use, release Trigger,
turn off and unplug Sprayer, safely discharge any
residual air pressure, and release Trigger again.
4. ;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%
,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%
47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%

Page 15K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
=2$*(%6\*(E%X#*
G?D[%WK%6eU<WD?W>%N%%
AW%>WB%DUG=C%K<=@@=T<6%<?lX?AD1
a. K&77&)%
#&7\*8$%5,8'2,4$'(*(]#%47*,8%'/%
"8#$('4$"&8#%,89%#,2*$E%/(*4,'$"&8#1
b. ?2%4&77*4$"83%27'#.*9%#&7\*8$#%"8%
5*$,7%4&8$,"8*(L%$(,8#2*(%$&%8&85*$,7%
4&8$,"8*(L%,89%27'#.%5*$,7%4&8$,"8*(1
c. Y&(V%2,(%,),E%2(&5%,8E%"38"$"&8%
#&'(4*#%"8%,%\,/&(%2(**%,(*,1
d. [**/%47,##%=T;%2"(*%*_$"83'"#.*(%8*,(+E1
Y=G>?>Fm %BW%UG6!6>B%D6G?WXD%?>kXGC-%%A&%8&$%#/(,E%&(%47*,8%
)"$.%7"J'"9#%.,\"83%,%27,#.%/&"8$%7*##%$.,8%HOa;%bMIIaKc1
W87E%'#*%),$*(%&(%5"8*(,7%#/"("$#%2&(%/("5"83%,89%47*,8"831%%%
W87E%'#*%),$*(N+,#*9%&(%&"7N+,#*9%/,"8$%2&(%#/(,E"831
U&#$N;7*,8"83
>WB?;6-%%A&%8&$%"55*(#*%D/(,E%F'8%T&9E%"8%
#&7\*8$1%%A&%8&$%,77&)%#&7\*8$%$&%*8$*(%$.*%,"(%"87*$1%
1. Use solvent recommended by paint manufacturer.
2. Designate container for waste.
3. Remove Cup, the remove paint from
Cup and dispose of properly.
4. Add 1/4 cup solvent (sold separately)
to Cup. Replace Cup, then shake
Spray Gun for several seconds.
5. Remove Cup, pour solvent into waste
container and wipe away any paint residue
from Cup and Lid with clean cloth.
6. Add solvent to Cup until one
quarter full. Replace Cup.
7. Turn Air Control Knob clockwise until
it stops. It will be fully open.
8. Turn Fluid Control Knob counterclockwise
until two threads are showing.
9. Plug Sprayer into grounded 120VAC
outlet, then turn Sprayer on.
10. Point Spray Gun at interior side of waste
container. Depress Trigger and slightly shake
Spray Gun while spraying solvent into the
container. Once the Cup is empty, repeat the
process until the solvent comes out clean.
11. Turn off and unplug Sprayer, point Spray Gun
into waste container and depress Trigger again
to make sure no air pressure remains.
12. Turn Lock Ring by hand and remove, then remove
Air Cap and Air Valve (58149 - remove Spring).
13. Depress Trigger to retract Fluid Needle, then
remove Fluid Nozzle with included wrench.
14. Remove Fluid Control Knob,
Fluid Needle Spring, and Fluid Needle.
<&4V%
G"83%n%
="(%;,/%
K7'"9%
>&^^7*
="(%!,7\*%D/("83%

="(%
!,7\*
K7'"9%
>**97*
K7'"9%
>**97*%
D/("83
15. Inspect parts and soak in solvent as
necessary. Use included brush and nozzle
cleaning tool to remove any paint.
>&$*- B&%/(*\*8$%9,5,3*L%9&%8&$%+*89%K7'"9%>**97*1
16. Wipe down Spray Gun Body with
a clean cloth and solvent.
17. Make sure all parts are dry and free from
residual paint, then reassemble Spray Gun.
>WB?;6- A&%8&$%'#*%,8E%V"89%&2%7'+("4,8$1%%B.*%
7'+("4,8$%)"77%5"_%)"$.%/,"8$L%4,'#"83%/&&(%(*#'7$#1
Y,#$*%A"#/&#,7
After cleaning, dispose of waste according to the solvent manufacturer’s
directions and local hazardous waste standards.

Page 16 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
X#*(N@,"8$*8,84*%?8#$('4$"&8#
U(&4*9'(*#%8&$%#/*4"2"4,77E%*_/7,"8*9%"8%$."#%5,8',7%%
5'#$%+*%/*(2&(5*9%&87E%+E%,%J',7"2"*9%$*4.8"4",81
BW%UG6!6>B%D6G?WXD%?>kXGC-%
B'(8%&22%,89%'8/7'3%#/(,E*(%,89%#,2*7E%9"#4.,(3*%,8E%(*#"9',7%,"(%/(*##'(*%"8%$.*%$&&7%
+*2&(*%/*(2&(5"83%,8E%"8#/*4$"&8L%5,"8$*8,84*L%&(%47*,8"83%/(&4*9'(*#1
BW%UG6!6>B%D6G?WXD%?>kXGC%KGW@%BWW<%K=?<XG6-%%A&%8&$%'#*%9,5,3*9%*J'"/5*8$1%%
?2%,+8&(5,7%8&"#*L%\"+(,$"&8L%&(%7*,V"83%,"(%&44'(#L%.,\*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1
?8#/*4$"&8
>&$*- These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the tool.
T6KWG6%6=;d%XD6L inspect the general condition of the tool. Check for:
• damaged cord/electrical wiring,
• loose hardware,
• misalignment or binding of moving parts,
• clogged fluid nozzle or air cap,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
<'+("4,$"&8
Do not use any kind of lubricant in Spray Gun.
='$&%D.'$&22
The motor has thermal overload protection. If unit overheats, allow approximately
30 minutes for unit to cool, then press Thermal Overload Switch.
D$&(,3*
Store in a dry, secure area out of reach of children.

Page 17K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
="(%K"7$*(%@,"8$*8,84*
1. Remove Air Inlet Covers by
turning counterclockwise.
2. Remove and inspect Filters. Clean
Filters as necessary. Replace Filters if
they cannot be cleaned sufficiently.
3. ;7*,8"83-
a. Sponge Filters - Wash in warm water and mild
detergent several times. Rinse. Squeeze out
excess water and allow to dry completely.
b. Paper Filter - To prevent injury from dust and
debris, wear ANSI-approved safety goggles,
NIOSH-approved dust mask/respirator, and
heavy-duty work gloves.
In a well ventilated area, away from bystanders,
use pressurized air (no more than 15 PSI)
to blow dust out of the Filter.
4. Install Filters and replace Air Inlet Covers
by turning clockwise.
="(%
?87*$%
;&\*(
D/&83*%
U(*N
K"7$*(
U,/*(%
K"7$*(
D/&83*%
U(*N
K"7$*(
D/&83*%
K"7$*(
="(%
?87*$%
;&\*(
G*/7,4*%="(%B'+*
1. Remove Air Tube from Spray Gun and Cup Lid.
2. Orient new Air Tube so that tapered end
of Check Valve is facing down.
3. Push ends of new Air Tube over fittings on
Spray Gun and Cup Lid. If necessary, add a small
amount of water as lubricant to interior of tube.
;.*4V%
!,7\*
="(%
B'+*

Page 18 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
B(&'+7*#.&&$"83%N%D/(,E%U,$$*(8%A",38&#"#%
>&$*- The drawings on the left below resemble symptoms of spray pattern problems.
Refer to the accompanying possible causes and likely solutions to the right.
U(&+7*5 U&##"+7*%;,'#*# <"V*7E%D&7'$"&8#
Heavy center
pattern
1. Fluid Control Knob
needs adjustment.
2. Air Control Knob
needs adjustment.
3. The paint is too thick.
1. Turn Fluid Control Knob
counterclockwise.
2. Turn Air Control Knob
clockwise until it stops.
3. Thin paint according to the
manufacturer’s instructions.
Light center
pattern
1. Fluid Control Knob
needs adjustment.
2. Air Control Knob
needs adjustment.
3. Dried paint on Nozzle.
4. Needle and/or Nozzle
damaged.
1. Turn Fluid Control Knob clockwise.
2. Turn Air Control Knob counterclockwise.
3. Clean Nozzle.
4. Inspect Needle and Nozzle for
damage. Replace as necessary.
Heavy top/
bottom pattern
1. Air Cap plugged.
2. Lock Ring loose.
3. Dried paint on Nozzle.
4. Needle and/or Nozzle
damaged.
1. Clean Air Cap.
2. Tighten Lock Ring.
3. Clean Nozzle.
4. Inspect Needle and Nozzle for
damage. Replace as necessary.
Pattern on right
or left only
Dried paint or debris on Nozzle. Clean Nozzle.
Jerky or
Fluttering Spray
1. Loose or damaged Air Cap.
2. Paint level low.
3. Cup and/or Lid loose.
4. Clogged Check Valve.
1. Tighten Air Cap.
2. Refill paint Cup.
3. Tighten Cup and/or Lid.
4. Clean Check Valve.
K&77&)%,77%#,2*$E%/(*4,'$"&8#%).*8*\*(%9",38&#"83%&(%#*(\"4"83%$.*%$&&71%%%
A"#4&88*4$%/&)*(%#'//7E%+*2&(*%#*(\"4*1

Page 19K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCWU6G=B?W>@=?>B6>=>;6 D6BXU
F*8*(,7%B(&'+7*#.&&$"83%;.,($%
U(&+7*5 U&##"+7*%;,'#*# <"V*7E%D&7'$"&8#
Sputtering Spray 1. Low paint level.
2. Cup tipped.
3. Cup and/or Lid loose.
4. Clogged Check Valve.
5. Air Hose loose.
6. Nozzle Seal damaged.
1. Refill.
2. Hold upright.
3. Tighten Cup and/or Lid.
4. Replace Air Hose.
5. Tighten Air Hose.
6. Have qualified technician replace seal.
Will Not Spray 1. No power at Spray Gun.
2. Thermal overload tripped.
3. Fluid too thick.
4. Cup and/or Lid loose.
5. Clogged Check Valve.
1. Check Power Cord.
2. Reset Thermal Overload Switch.
3. Thin fluid.
4. Tighten Cup and/or Lid.
5. Clean Check Valve.
Overspray
(Paint drifting to
unintended objects.)
1. Improper application speed.
2. Improper distance from workpiece.
3. Airflow too high.
4. Clogged Check Valve.
1. Move moderately and parallel.
2. Adjust distance.
3. Reduce Airflow.
4. Replace Air Hose.
Air Filter Light comes
on (58149 only)
Dirty filter(s) Clean or replace filters
K&77&)%,77%#,2*$E%/(*4,'$"&8#%).*8*\*(%9",38&#"83%&(%#*(\"4"83%$.*%$&&71%%%
A"#4&88*4$%/&)*(%#'//7E%+*2&(*%#*(\"4*1

Page 20 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 58479 58149
NOTICE
;7*,8%$.*%D/(,E%F'8%T&9E%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
U,"8$%.,(9*8#%J'"4V7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC WU6G=B?W> @=?>B6>=>;6D6BXU
U<6=D6%G6=A%Bd6%KW<<WY?>F%;=G6KX<<C
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
U,($#%<"#$#%,89%A",3(,5#
D/(,E%F'8%U,($#%<"#$
U,($ A*#4("/$"&8 l$E
1 Gun Body 1
2 Fluid Nozzle 1
3 Spring (58149 only) 1
4 Air Valve 1
5 Air Cap 1
6 Gasket 1
7 Lock Ring 1
8 Vent Screw 2
9 Plug 1
10 Fluid Inlet 1
11 Handle 1
12 Handle Tube 1
13 Handle Cover 1
14 Air Inlet 1
15 Trigger Pin 1
16 Trigger 1
17 Fluid Control Knob 1
18 Fluid Needle Spring 1
19 Fluid Needle Assembly 1
20 Fluid Needle Adjustment Seat 1
21 Fluid Needle Sealing Gasket 1
22 Air Valve Spring 1
U,($ A*#4("/$"&8 l$E
23 Fluid Needle Sleeve 1
24 Air Valve 1
25 Fluid Needle Compression Ring 1
26 Needle Plug Sleeve Sealing Gasket1 1
27 Fluid Needle Protective Sleeve 1
28 Fluid Needle Sealing Screw 1
29 Fluid Needle Sealing Spring 1
30 Fluid Needle Plug Seal 1
31 Screw 1
32 Air Control Knob 1
33 Gasket 14*17*0.4mm 1
34 Airflow Adjustment Seat 1
35 O-Ring 7.5*1.8 1
36 Airflow Adjustment Valve 1
37 Washer 1
38 C-Clip 1
39 Cup Cover Assembly 1
40 Air Tube 2
41 Check Valve 1
42 Sealing Gasket 1
43 Cup Assembly 1