Avantree HS063 User manual

User Manual
Stereo Wireless Headphones
HS063
Product Overview ···································································································································································· 1
Basic Operations & LED indicators ····································································································································· 1
Connect to a Bluetooth device············································································································································ 2
To add another mobile device············································································································································· 2
Reconnect to Bluetooth device··········································································································································· 3
Using as a wired headphone················································································································································ 3
Charging······················································································································································································ 3
Clear the headphones pairing history······························································································································ 4
Troubleshooting ······································································································································································· 4

1
Product Overview
AUX
Basic Operations & LED indicators
Button Function Operation
Power On/OFF Press and hold 4 seconds
Pairing mode From off, press and hold for 5 seconds until the LED
ashes RED and BLUE alternately
Answer/ End a call Press once
Reject a call Press and hold when there’s an incoming call
Play / Pause music Press once
Reconnect Press once
+ / -
Volume up / down Press + / - once
Next / Previous track Hold + / -
Microphone Mute ON / OFF During a call, hold the "-" button for 3 seconds to mute /
unmute the microphone
+ & - Voice Dial / Command (phone
features, e.g. Siri) Short press "+" and "-" at the same time
Note: Functionality varies by application.
Working Status LED indicator
Pairing Mode Flashes BLUE & RED alternately
Reconnecting Flashes BLUE quickly
Connected Flashes BLUE twice every 5s
Disconnected Flashes BLUE quickly
Low battery Flashes RED twice every second.

2
Connect to a Bluetooth device
Set headphones into Pairing Mode–
From o state, hold for 5 seconds until the LED indicator ashes RED & BLUE alternately. (Note: For rst time
use, the headphones will enter paring mode automatically once powered on.)
Pair with mobile device-
Set the headphones into pairing mode as above.
On your mobile device, turn on the BLUETOOTH function and search for new devices.
Select “Avantree HS063” to connect. Once connected, the LED on the headphone
will ash twice every 5 seconds.
Note: If you are using a Bluetooth transmitter please follow its user manual to set the transmitter into PAIRING
MODE.
To add another mobile device
Connect the FIRST mobile device as above. Once they’ve connected, turn the headphone o.
Connect the headphones with the SECOND mobile device the same way you did the rst one.
Once you’ve connected the SECOND one, turn the FIRST one back on and select “Avantree HS063” in its
Bluetooth menu to reconnect manually. Now, the Avantree HS063 is paired with TWO phones simultaneously.
Note: This ONLY works for two mobile devices, such as mobile phones and tablets; this method will not work for
PCs and Bluetooth transmitters.

3
Reconnect to Bluetooth device
Normally, when the next time you turn on Avantree HS063, it will automatically reconnect to the most recently
paired device. In case it doesn’t auto reconnect, try either pressing once to enter it into Reconnection Mode
or try reconnecting manually by selecting “Avantree HS063” on your mobile device’s Bluetooth menu.
Using as a wired headphone
To use it as a wired headphone connect one end of the 3.5mm audio cable we provided to the HS063
headphone, and plug the other end into the headphone jack of the broadcasting device you’re using.
Note: The headphone will power o automatically once you plug in the 3.5mm audio cable.
Charging
If you start to hear a “beep” sound every minute, it’s an indication that the battery level is low. To charge the
headphone,connect it to a power source using the USB cable we provided. Either a USB wall charger (DC 5V /
0.5-2A) or apowered computer USB port would work. The LED indicator on the headphones will remain RED
while charging and will turn o when charging is complete.

4
Clear the headphones pairing history
If you have issues with the audio stream skipping or cutting out when using Avantree HS063, please try to clear
pairing history as following:
Turn on the headphones (Non-calling Status), press and hold BOTH “+” and “-” simultaneously for 5 seconds until
the LED indicator blinks Blue and RED. The headphone will then enter pairing mode automatically.
Troubleshooting
No sound with PC?
Set Avantree HS063 as the default device or output device on the PC.
When using HS063 to make VOIP calls through apps, please set HS063 Hands-Free as Microphone
and Speakers device.
No sound with Bluetooth transmitter?
Ensure Bluetooth transmitter and headphones are connected properly.
Check if the audio source is functioning properly.
- AUX & RCA output on TV – test with wired headphones.
- OPT output on TV – Set audio format to“PCM/LPCM” or turn o Dolby/DTS.
Change your TV audio out setting to External speakers / Headset.
Headphones do not pair with Bluetooth device?
Ensure HS063 is in Pairing mode – LED ashes BLUE and RED alternately.
For Bluetooth transmitter, ensure the transmitter is in Pairing mode – refer to its user manual.
For Smart phone, tablet and PC
- Turn the Bluetooth o and then on again.
- Delete “Avantree HS063 headphones”from your device’s Bluetooth list and then try to pair again.
Clear the headphones pairing history and try to pair again.