Avaya S8700 Series Owner's manual

May 2003
1
Job Aid
Issue 3
Installation Tool Information—
S8700 Media Server
Avaya™ S8700 Media Server with MCC1 or SCC1 Media Gateway
This job aid provides information on tools required for installing an Avaya™ S8700 Media Server with MCC1 or
SCC1 Media Gateway. It covers the following items:
■Magneto Optical Server Tool
■Cable Pass Through Kit
Magneto Optical Server Tool
The Magneto Optical Server Tool (MOST) is used to transfer translation files from a Magneto Optical disk to an
Avaya S8700 Media Server. This tool is used only when migrating call processing translations on a DEFINITY
ECS to an Avaya S8700 Media Server with MCC1 or SCC1 Media Gateway. Refer to Magneto Optical Server Tool
(MOST) for information on connecting the tool to the media server.
The MOST tool is not shipped with every system but should be available locally.
The MOST tool consists of:
■External Magneto Optical drive
■SCSI PCcard
■External SCSI cable

Job Aid
2
May 2003 Issue 3
1. S8700 Media Server
2. SCSI PCcard
3. PCMCIA Connector
4. SCSI Cable and connector
5. Bottom connector on Magneto Optical drive
6. On/Off button
7. External Magneto Optical drive
Figure 1. Magneto Optical Server Tool (MOST)
1234
ON ECE
2
3
4
5
6
7
0
1
+5VDC
OUT
IN
U1 U2
1 2
1
2
4
5
7
6
3
cadlopt KLC 081402

Job Aid
May 2003
3
Issue 3
Ordering Information
Cable Pass Through Kit
The Cable Pass-Through Kit is used to facilitate passing cables from the back to the front of an Avaya SCC1 Media
Gateway. This kit is used for the following cable types and situations:
■The ribbon cable used to connect to the TN2312AP IPSI circuit pack in the SCC1 media gateway B and to the
TN775D Maintenance circuit pack in SCC1 media gateway A. (See Using the Cable Pass-Through Kit for the
ribbon cable)
■The CAT5 Ethernet cable that connects to the faceplate of the TN2312AP IPSI circuit pack and a port on the
Avaya Ethernet switch. (See Using the Cable Pass-Through Kit for the CAT5 cable)
For specific installation instructions refer to the Install IPSI and Maintenance Circuit Packs subection within the
Migrating to the S8700 Media Server section on the S8700 Media Server Library CD.
The Cable Pass-Through Kit is similar in construction to the pass-through tool in the Fiber Pass-Through Kit that is
used during ATM installations.
Table 1. Magneto Optical Server Tool
Comcode Description
700226269 Magneto Optical Server Tool

Job Aid
4
May 2003 Issue 3
Figure 2. Using the Cable Pass-Through Kit for the ribbon cable
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
ALARMS
EMERTR
MAJ
MIN
WRN
ACK
ON
OFF
AUTO
cadsrib2 KLC 032602
602

Job Aid
May 2003
5
Issue 3
Figure 3. Using the Cable Pass-Through Kit for the CAT5 cable
Ordering Information
Table 2. Cable Pass Through Kit ordering information
Comcode Description
700219413 Cable Pass Through Kit
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
ALARMS
EMERTR
MAJ
MIN
WRN
ACK
ON
OFF
AUTO
cadscat2 KLC 032602