AVGear AVG-DAX-100 User manual

AVG-DAX-100
The AVG-DAX-100 is an audio extender, which
includes a Transmitter and a Receiver.
It extends TOSLINK, COAX signals up to 290m
and Analogue Stereo signals up to 170m via CAT
cable.
Features
Select from three audio inputs,
TOSLINK, COAX or Analogue Stereo.
Three synchronous audio outputs.
TOSLINK, COAX and Analogue
Stereo.
Transmitter is powered from the
Receiver via PoC technology.
Can transmit TOSLINK, COAX
signals up to 290m and the Analogue
Stereo signals up to 170m over a
single CATx cable.

AVG-DAX-100
PLEASE READ THIS PRODUCT MANUAL CAREFULLY
BEFORE USING THIS PRODUCT.
This manual is only for operational instruction only,
and is not intended to be used for maintenance.
The functions described in this version are current
as at October 2016. Any changes of functions and
operational parameters will be updated in future
manual versions. Please refer to your dealer for
the latest product details.
Version 1.0 22/10/16

AVG-DAX-100
SAFETY OPERATION GUIDE
In order to guarantee the reliable operation of the equipment and safety of the
user, please abide by the following procedures during installation, use and
maintenance:
1. Do not install the device in an environment where it will be exposed to
extreme hot or cold temperatures.
2. This unit will generate heat during operation, please ensure that you allow
adequate ventilation to ensure reliable operation.
3. Please disconnect the unit from mains power if it will be left unused for a
long time.
4. Please DO NOT try to open the casing of the equipment, DO NOT attempt to
repair the unit. Opening the unit will void the warranty. There are high
voltage components in the unit and attempting to repair the unit could result
in serious injury.
5. Do not allow the unit to come into contact with any liquid as that could result
in personal injury and product failure.

AVG-DAX-100
TABLE OF CONTENTS
Introduction ........................................................................................................... 1
Introduction to the AVG-DAX-100 ...............................................................1.1
Features ......................................................................................................1.2
What’s in the Box .......……………………………………………………………………2
Product Appearance of the AVG-DAX-100 ........................................................... 3
Transmitter ..................................................................................................3.1
Receiver ......................................................................................................3.2
Specifications ........................................................................................................ 4

AVG-DAX-100
1. Introduction
1.1. Introduction to the AVG-DAX-100
The AVG-DAX-100 is an audio extender, which includes a Transmitter and a Receiver.
It extends TOSLINK, COAX signals up to 290m and Analogue Stereo signals up to
170m via CAT cable.
Features
Select from three audio inputs, TOSLINK, COAX or Analogue Stereo.
Three synchronous audio outputs. TOSLINK, COAX and Analogue Stereo.
Transmitter is powered from the Receiver via PoC technology.
Can transmit TOSLINK, COAX signals up to 290m and the Analogue Stereo
signals up to 170m over a single CATx cable.

AVG-DAX-100
2. What’s in the Box?
1 x Transmitter
1 x Receiver
1 x Power Adapter (DC 12V 1A)
4 x Mounting ears with screws
8 x Rubber feet
1 x User Manual
Note: Please confirm if the product and the accessories are all included, if not, please
contact your dealer.

AVG-DAX-100
3. Product Appearance of the AVG-DAX-100
3.1. Transmitter
Front Panel
A. TOSLINK digital audio input port, connect to your audio source.
B. COAX digital audio input port, connect to your audio source.
C. Stereo audio input port, connect to your audio source.
D. DIP switch for selecting the audio input source.
Rear Panel
1. Micro USB port for future firmware updates.
2. RJ45 port connects to the TP IN port of the AVG-DAX-100
Receiver.
3. Power indicator. Illuminates RED if it has power.
3.2. Receiver
Front Panel
A. TOSLINK digital audio output port. Connect to an amplifier or audio
matrix.
B. COAX digital audio output port. Connect to an amplifier or audio
matrix.
C. RCA (L+R) audio output port. Connect to an amplifier or audio
matrix.
Rear Panel
1. Micro USB port for future firmware updates.
2. RJ45 port, connects to the TP OUT port of the AVG-DAX-100
Transmitter.
3. Power port, connects to the supplied 12VDC power adaptor.
4. Power indicator. Illuminates RED if it has power.

AVG-DAX-100
Specifications
Transmitter
Receiver
Input
TOSLINK, COAX or AUDIO
Input
1 TP IN
Output
1 TP OUT
Output
TOSLINK, COAX & RCA (L+R)
General
Audio Format
TOSLINK & COAX: PCM/Dobly/DTS;
AUDIO: Stereo
Sound Channel
TOSLINK & COAX: 2.0 - 7.1
Frequency Response
20 Hz to 20 kHz, ±3 dB
Sample Rate
TOSLINK & COAX: 48k / 96k / 192k 16bit / 18bit / 24bit
Transmission
Distance
Analogue Stereo: Up to 170m (CAT5e / 6 / 7)
TOSLINK/COAX: Up to 290m (CAT5e / 6 / 7)
Power Supply
Input: 100VAC ~ 240VAC, 50 / 60Hz; Output: 12VDC, 1A
Power Consumption
2.5W (Max)
Work Temperature
-10 ~ +55℃
Humidity
10% ~ 90%
Net Weight
Transmitter: 110g; Receiver: 119g
Dimension(W*H*D)
88mm x 80mm x 21.5mm