AVGear AVG-HD220 User manual

The AVG-HD220 extender kit consists of a transmitter (Tx)
and a receiver (Rx). It extends 4K@60Hz 4:4:4 HDMI
signals up to 40m and 1080P@60Hz up to 70m over a
single CATx Ethernet cable. It supports bi-directional 24V
PoC, which simplifies the wiring requiring only a single
power adapter to be used. It supports bi-directional IR
pass-through extension, allowing for control of local video
source devices or the remote display. Moreover, it
supports EDID and CEC pass-through.
⚫HDMI V2.0 standard and HDCP 2.2
compliant.
⚫Supports video resolutions up to
4Kx2K@60Hz 4:4:4.
⚫Transmission distance is up to 40m for
4Kx2K, and 70m for 1080P.
⚫Supports bi-directional IR pass-through
for long-distance control.
⚫Supports bi-directional 24V PoC.
⚫Supports EDID and CEC pass-through.

AVG-HD220
PLEASE READ THIS PRODUCT MANUAL CAREFULLY
BEFORE USING THIS PRODUCT.
SAFETY OPERATION GUIDE
This manual is only for operational instruction only, and not to be used
for maintenance. The functions described in this version are current as
at June 2021. Any changes of functions and operational parameters will
be updated in future manual versions. Please refer to your dealer for the
latest product details.
Version 1.0 05/05/21

AVG-HD220
SAFETY OPERATION GUIDE
TABLE OF CONTENTS
Product Introductions……………………………………………………………………….1
What’s in the Box……………………………………………………………………………2
Unit Description……………………………………………………………………………… 3
Transmitter………………………………………………………………………..3.1
Receiver…………………………………………………………………………..3.2
System Connections………………………………………………………………………….4
Specifications………………………………………….………………………..……………. 5
To guarantee the reliable operation of the equipment and safety of the user, please
abide by the following procedures in installation, use and maintenance:
1. The system must be earthed properly. Please do not use two blade plugs and
ensure the alternating power supply ranges from 100v to 240v and from 50Hz
to 60Hz.
2. Do not install the product in an environment where it will be exposed to
extreme hot or cold temperatures.
3. This unit will generate heat during operation, please ensure that you allow
adequate ventilation to ensure reliable operation.
4. Please disconnect the unit from mains power if it will be left unused for a long
time.
5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to
repair the unit. Opening the unit will void the warranty. There are high voltage
components in the unit and attempting to repair the unit could result in serious
injury.
6. Do not allow the unit to come into contact with any liquid as that could result in
personal injury and product failure.

AVG-HD220
TABLE OF CONTENTS
Product Introduction……………………………………………………………………….1
What’s in the Box……………………………………………………………………………2
Unit Description……………………………………………………………………………… 3
Transmitter………………………………………………………………………..3.1
Receiver…………………………………………………………………………..3.2
System Connection………………………………………………………………………….4
Specifications………………………………………….………………………..……………. 5

AVG-HD220
1. Introduction
Thanks for choosing the AVG-HD220 extender kit which consists of a transmitter (Tx) and a receiver
(Rx). It allows extension of a 4K@60Hz 4:4:4 HDMI signal to a distance of up to 40m and a
1080P@60Hz signal up to 70m over a single CATx Ethernet cable. It supports bi-directional 24V Power
over Cable (PoC), which simplifies the wiring to require only a single power adapter to power both ends.
It supports bi-directional IR pass-through extension, allowing for control of a local video source device or
the remote display. Moreover, it supports EDID and CEC pass-through.
Features
⚫HDMI V2.0 standard and HDCP 2.2 compliant.
⚫Supports video resolutions up to 4Kx2K@60Hz 4:4:4.
⚫Transmission distance is up to 40m for 4Kx2K, and 70m for 1080P.
⚫Supports bi-directional IR pass-through for long-distance control.
⚫Supports bi-directional 24V PoC.
⚫Supports EDID and CEC pass-through.
2. What’s in the Box
⚫1x Transmitter (TX)
⚫1x Receiver (RX)
⚫1x Power Adaptor (24V DC, 1.25A)
⚫1x User Manual

AVG-HD220
3. Unit Description
Transmitter Panel Description
No.
Name
Description
①
HDMI IN
Type-A HDMI port to connect the source device (e.g. Blu-ray DVD).
②
IR IN
3.5mm jack to connect an IR receiver (not included).
IR OUT
3.5mm jack to connect an IR emitter (not included).
③
DC 24V
DC barrel connector to connect the AC power adapter.
④
Power LED
Illuminates green when the unit is powered on.
⑤
HDBT OUT
RJ45 connector for a CATx Ethernet cable to connect the transmitter and
the receiver. The LINK LED illuminates when there is a valid HDBaseT™
link between the transmitter and the receiver. The HDCP LED illuminates
when the video contains HDCP content.
HDMI IN IR IN IR OUT DC 24V HDBT OUT
1 2 3 4 5

AVG-HD220
Receiver Panel Description
No.
Name
Description
①
HDMI OUT
Type-A HDMI port to connect an HDMI display.
②
IR IN
3.5mm jack to connect an IR receiver (not included).
IR OUT
3.5mm jack to connect an IR emitter (not included).
③
DC 24V
DC barrel connector to connect the AC power adapter.
④
Power LED
Illuminates green when the unit is powered on.
⑤
HDBT IN
RJ45 connector for a CATx Ethernet cable to connect the transmitter and
the receiver. The LINK LED illuminates when there is a valid HDBaseT™
link between the transmitter and the receiver. The HDCP LED illuminates
when the video contains HDCP content.
HDMI OUT IR IN IR OUT DC 24V HDBT IN
1 2 3 4 5

AVG-HD220
4. System Connection
Note: This picture is for reference only.

AVG-HD220
5. Specifications
Transmitter (Tx)
Input
(1) HDMI
Input Connector
(1) Female type-A HDMI
Output
(1) HDBT
Output Connector
(1) RJ45
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
Receiver (Rx)
Input
(1) HDBT
Input Connector
(1) RJ45
Output
(1) HDMI
Output Connector
(1) Female type-A HDMI
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
General
Video Resolution
Up to 4Kx2K@60Hz 4:4:4
Transmission Mode
HDBaseT
Transmission Distance
1080P@60Hz ≤ 230ft/70m,
4K@60Hz ≤131ft/40m
HDMI Version
2.0
HDCP Version
2.2
Bandwidth
18Gbps
Power Consumption
11.2W (Max)
Operating Temperature
-10℃~ +55℃
Storage Temperature
-25℃~ +70℃
Relative Humidity
10%-90%
Power Supply
Input Power: 24V DC 1.25A or Power over Cable (PoC)，
AC Adaptor Input Power: 100~240VAC, 50/60Hz
Dimension (W*H*D)
74mm x 24mm x 120mm
Net Weight (g)
Tx: 200g, Rx:210g