AVT MAGIC THipPro Lite User manual

[email protected]
www.avt-nbg.de
© AVTAudio Video Technologies GmbH
Configuration Guide
Version: 3.810 (09. January 2023)
MAGIC THipPro (Pure) Lite

▪Documents
▪Overview
▪Hardware
▪Basic Features
▪Optional Features
▪Accessories
▪PC Software
▪Resources
▪Initial Setup
▪Setting the IP Address
▪Connecting the PC Software
▪First Steps
▪Possible Applications
▪Configuration
▪System Settings
▪Date and Time and Login
▪Operation Settings
▪Local Settings
▪Factory Settings
▪Maintenance
▪Backup / Restore
▪Updates
▪Registration
▪System Monitor
▪Support
Content
4

▪Get further information in the following documents which are available in
the Download section of our website at www.avt-nbg.de.
▪Quick Guides:
▪Audio over IP (AES67-DANTE-RAVENNA-LIVEWIRE)
▪Signalling and Control with DHD SetLogic
▪Signalling and Control with Ember+
▪Ember+ Consumer Extension
▪MAGIC PhonerSet Provisioning Guide
▪SQL Server 2012 Installation
▪Documentations:
▪MAGIC PhonerSet
▪MAGIC THipPro Hardware
Additional Documents
5

[email protected]
www.avt-nbg.de
© AVTAudio Video Technologies GmbH
Overview
MAGIC THipPro Lite
▪Hardware
▪Basic Features
▪Optional Features
▪Accessories

Hardware –Front
▪Five Status LEDs
▪POWER
▪SYNC (On while booting)
▪ALARM (Indicating hardware problems)
▪INFO 1, INFO 2 (Not in use)
▪Two RJ10 Handset/Headset interfaces for
PRETALK (Not available for MAGIC THipPro Pure
Lite).
▪Illuminated graphic display with 160 x 32 pixels &
front keypad.
▪For basic settings and status display only.
7

THipPro Lite Hardware –Rear
▪Two independent LAN interfaces
▪Up to three VLANs per LAN interface
▪Word clock input/output
▪2 x analogue mono audio in-/outputs
▪2 x XLR male/female each
▪2 x AES3/EBU stereo audio in-/outputs (Digital
AES 1 –2)
▪4 digital audio lines (Sub-D 15-pole with adaptors
to XLR male/female)
▪2 x AES3/EBU stereo audio in-/outputs (Digital
AES 3 -4, licence required)
▪4 digital audio lines (Sub-D 15-pole with adaptors
to XLR male/female)
▪Optional socket for redundant power supply.
▪Programmable GPIO interface
▪8 TTL in-/output
▪8 relays (NO)
▪2 x slots for extension modules
8

THipPro Pure Lite Hardware –Rear
▪Two independent LAN interfaces
▪Up to three VLANs per LAN interface
▪Word clock input/output
▪Programmable GPIO interface
▪8 TTL in-/output
▪8 relays (4 x NO, 4 x NC)
▪2 x slots for extension modules
▪Optional socket for redundant power supply.
▪No physical audio interfaces.
▪The configuration described in this manual refers
to the MAGIC THipPro Lite with physical audio
interfaces, but also applies to the MAGIC THipPro
Pure Lite. Any reference to the physical audio
interfaces should be ignored when configuring a
MAGIC THipPro Pure Lite.
9

Hardware –Module slots 1 and 2
▪POTS
▪2 x POTS modules for 8 caller lines
▪DANTE
▪32 channels in/out
▪2 Ethernet interfaces
▪Only for VoIP systems
▪The standard Audio interfaces can still be used
▪RAVENNA
▪32 channels in/out
▪2 Ethernet interfaces
▪Only for VoIP systems
▪The standard Audio interfaces can still be used
▪LAN 3/4 Module
▪Two additional 10/100 Mbit/s Ethernet interfaces
10

▪Housing 19” x 1 U
▪Leave 1U space above the unit for cooling.
▪No fan for noiseless operation
▪Low power consumption of typically 15W
▪12 Audio lines (THipPro Lite only)
▪2 x analogue in-/outputs
▪2 x digital in-/outputs included (2 x AES)
▪2 x digital in-/outputs optional (2 x AES)
▪2 x handsets/headsets
▪Digital signal processing for each channel
▪Echo Canceller with up to 120 ms echo tail time
▪AGC Automatic Gain Control
▪Expander for noise reduction
▪Voice Disguise (VD) function
▪Conferencing for PRETALK and ON AIR
Basic Features (1)
11

▪Up to 2 internal recorded HOLD signals with up to
16 seconds each
▪Use up to 2 audio channels as external HOLD
inputs
▪Programmable GPIOs for controlling a mixing
console and for external signalling
▪DHD SetLogic Support
▪96 GPIOs, each configurable as input or output
▪Predefined GPIOs for a dialling keypad
▪Ember+ Provider Support
▪Connect up to 6 Ember+ Consumers
▪96 GPIO inputs
▪96 GPIO outputs
▪Predefined GPIOs for 1 dialling keypad
▪Caller number, caller name, Functions
▪Ember+ Consumer Support
▪Connect to up to 2 Ember+ Providers
▪20 function slots per Ember+ Consumer
▪For screening information, Numbers to dial, …
▪DTMF generator for transmission of DTMF tones
▪Integrated SIP Monitor and Logging
▪Audio test panel with signal generator
▪MAGIC THipPro Lite Software
▪Touch optimized Windows PC software for
▪Call control
▪Maintenance
▪Configuration
▪Single user licence
▪Up to 8 clients per unit (1 licence included)
▪MS Access database for phone book and call history.
Basic Features (2)
12

▪VoIP + HD-Voice Option
▪For 4 or 8 channels
▪-Voice (G.722)
▪High quality speech codec in VoIP operating mode
▪Doubling the audio bandwidth compared to the
standard ISDN codec.
▪Automatic selection of the best codec for VoIP calls.
▪POTS Option
▪Up to 2 hardware modules with 4 channels each
▪Up to 8 POTS channels per unit
▪8 x FXO Ports VoIP/POTS Gateway
▪8 POTS channels per unit.
▪Connects to the THipPro via predefined VoIP accounts.
▪MAGIC THipPro Full Upgrade
▪Including SQL Database and Digital Audio
▪Available for THipPro Lite with 8 VoIP or 8 POTS
lines
▪THipPro Lite-specific options are not transferred.
▪Pretalk Streaming via IP
▪Stream pretalk audio signals between up to 6 PCs
and the THipPro.
▪Use any audio interface of the PC (e.g., a USB
headset)
▪Supports convenient recording at the PC.
▪Single licence per Pretalk Stream
Optional Features (1)
13
HD

▪AES67
▪Audio over IP networking software upgrade.
▪Output: 8 audio channels (1 stream).
▪Input: 8 audio channels (2 streams).
▪Announcement and auto discovery of streams.
▪SDP stream description import and export
▪Limited to Ethernet interfaces 1 and 2.
▪LAN3/4 Module
▪Hardware upgrade adding 2 Ethernet interfaces.
▪Not available if a POTS module is installed.
▪Supports all protocols except AES67.
▪Dante Module
▪Audio over IP networking hardware upgrade.
▪32x32 audio channels.
▪Supports AES67 for interconnection with Ravenna,
Livewire+, etc.
▪2 Ethernet interfaces to support redundancy
▪Ravenna Module
▪Audio over IP networking hardware upgrade.
▪32x32 audio channels.
▪Supports AES67 for interconnection with Dante,
Livewire+, etc.
▪2 Ethernet interfaces to support redundancy
▪Redundant Power Supply
▪Additional socket for an external power adapter.
▪Power adapter included.
Optional Features (2)
14

▪Ember+ Consumer Extension
▪Connect up to 6 third party workplaces using only
Ember+ and DHD SetLogic.
▪Full call control and display of caller information
and audio level.
▪Single licence per workplace.
▪Ember+ Dial Pad Extension
▪Up to 6 pre-configured Ember+ Dial Pad GPIOs in
the Ember+ tree of the built-in provider.
▪DTMF Analyser
▪Game Show and Event Mode
▪MAGIC System Manager
▪Access the MAGIC THipPro Lite from AVT’s central
management software which supports all AVT
telephone hybrids and audio codecs.
▪Comfortable overview of system health, full
configuration and Preset management.
▪Windows PC software
▪PhonerSet
▪Control up to eight lines via a touchscreen-
equipped Grandstream Android phone.
▪Use the phone’s handset for Pretalk.
▪Connect up to 8 PhonerSets.
▪Single licence per PhonerSet.
▪SQL Upgrade
▪For phone book and call history.
▪Share the phone book with other AVT telephone
hybrids.
Optional Features (3)
15

▪MAGIC PhonerSet
▪MAGIC THipPro Lite Handset
▪MAGIC THipPro Lite Headset
▪USB Headset
▪For Pretalk Audio Streaming
▪USB Handset
▪For Pretalk Audio Streaming
Accessories
16

▪MAGIC THipPro Lite
▪Touch optimised Windows PC
software
▪Single-user licence
▪Supporting window sizes
between 900 x 280 px and
8000 x 6000 px.
▪Automatic scaling for high-
DPI screens.
▪Up to 8 clients can access
the system simultaneously.
▪Optional MS SQL Server
backend database
▪Each client has direct access
to the MAGIC THipPro Lite
unit.
17
PC Software

▪The AVT MAGIC THipPro Lite unit comes with a
USB Flash Drive including the current PC
software, firmware and the manual.
▪The latest version of the MAGIC THipPro Lite
software is freely available in the download
section of our website http://www.avt-nbg.de.
▪The installer contains the MAGIC THipPro Lite PC
software and the matching firmware.
▪Also check the DOCUMENTS and QUICK GUIDES
sections on the website for further information.
Resources
18

[email protected]
www.avt-nbg.de
© AVTAudio Video Technologies GmbH
Initial Setup
MAGIC THipPro Lite

▪Connect the MAGIC THipPro Lite to the mains.
▪Configure the IP address of the LAN interface via
the front display as shown on the right.
▪The MAGIC THipPro Lite can be configured to use
DHCP later via the PC software on the LAN
INTERFACE configuration page.
▪Subsequently also configure SUBNET MASK and
DEFAULT GATEWAY of LAN interface 1.
▪Connect the socket LAN 1 of the device to the
Ethernet network and connect the PC software.
▪All further configurations should be done using
the PC software.
Initial Setup
20

[email protected]
www.avt-nbg.de
© AVTAudio Video Technologies GmbH
Connecting the software
MAGIC THipPro Lite

▪Run the MAGIC THipPro Lite setup.exe to install
the software.
▪Run the software as administrator.
▪Right click the MAGIC THipPro Lite icon on the
desktop and select Run as administrator.
▪Make sure to have the MAGIC THipPro Lite
connected to the local network.
▪In the MAGIC THipPro Lite software open Menu >
Configuration > Control Interface.
▪INTERFACE: Select UDP.
▪PARAMETER –INTERFACE: Select the network
interface of the PC which has access to the unit.
▪PARAMETER –IP-ADDRESS: Enter the IP address of
the MAGIC THipPro Lite (default: 192.168.96.102).
Get the current IP address from the MAGIC THipPro
Lite’s front display by pressing the HANG UP button
(to the right of the OK button) repeatedly.
▪PARAMETER –PORT: Enter the control port of the
MAGIC THipPro Lite (default: 10000).
MAGIC THipPro Lite PC software (1)
22