AXIOMTEK FAB116-8B3P3 User manual

FAB116-8B3P3 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Jan 2011
Printed in Taiwan
9419B116010E
4
Board Dimensions
FAB116-8B3P3 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1Jan 2011
Printed in Taiwan
9419B116010E
1
I. Checklist
9FAB116-8B3P3 8-Slot ATX-Supported
PICMG 1.3 Bus Backplane x 1
9Quick Installation Guide x 1
Note1: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II. Jumper List
Jumper Description
JP1 Open : ATX by CPU Card(default)
Short : ATX Power Always On
JP2
(Reserved)
Auto Power Button (Optional)
Open : Disable
Short : Enable
JP3 PCIEB1-PCIEB3 Link Speed(Gen1/Gen2) Open : Auto (default)
Short(1-2)(3-4) : Gen1
III. Connectors
Connector Description
CN1 ATX Power Connector
CN2 12V 8Pin(+12V Auxiliary Power Connector)
CN3 8-Pin Power Connector for thermal board
CN4 SM Bus Connector
CN5,CN6,CN7 (Reserved) COM Ports and DIO Connector (Optional)
CN8,CN9,CN10,CN11(Reserved) Thermal Sensor Connector for FAN1,FAN2 &
FAN3,FAN4(Optional)
CN12 PCIex16 SDVO Control Signal Connector
CN13 IPMB Connector
USB1,USB2 USB 0,1,2,3 Connector
PWRBT1 ATX Power Button Connector
HWRST1 Hardware Reset Connector
FAN1,FAN2,FAN3,FAN4 FAN Connector
SHB1-SHB4 PICMG 1.3 Full-Size SBC Slot

FAB116-8B3P3 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Jan 2011
Printed in Taiwan
9419B116010E
2
PCI1-PCI3 PCI Slots 32-bit/33MHz
PCIE1 X16 PCIe Slot
PCIEB1-PCIEB3 X4 PCIe Slot (Note 2)
VR1,VR2,VR3,VR4 (Reserved) Temperature Selection For FAN
Control
(
Optional
)
Power Connector (CN1;CN2;CN3)
CN1 CN2 CN3
SM Bus Connector (CN4)
Pin Signal
1 +5V
2 SM_CLK
3 SM_DAT
4 GND
FAB116-8B3P3 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1Jan 2011
Printed in Taiwan
9419B116010E
3
Power ON/OFF Push Button Connector (PWRBT1)
Pin Signal
1 PWR_BT
2 GND
Hardware Reset Connector (HWRST1)
Pin Signal
1 HW_RST
2 GND
USB Connectors (USB1, USB2)
Pin Signal Pin Signal
1 USB Power 2 USB Power
3 USB P0- 4 USB P1-
5 USB P0+ 6 USB P1+
7 USB GND 8 USB GND
10 GND
FAN Connector (FAN1,FAN2,FAN3,FAN4)
Pin Signal
1 GND
2 +12V
3 N.C or Rotation
Detection (Reserved)
Note 2: Follow by PICMG1.3 standard, The ports for the B[3:0] link
are configured to one x4 PCIe. And the x4 PCIe is transferred to
three x4PCIe slots (PCIEB1-PCIEB3) via PCIe switch.