26761/EN/R2/0604
AXIS 295 Video Surveillance Joystick
Specifications
Connection USB port, connected directly to the workstation/PC. Uses
the standard Direct X drivers
Joystick specification Hall-effect joystick with three axes:
- X/Y: for camera view positioning
- Z: for zoom in and out
Twelve programmable push-buttons, 2 on handle and 10
on base housing
Joystick Travel: X/Y-Axes: ±18° Z-Axis: ±40°
Centering: Single spring, omni-directional
Housing: high impact ABS
Handle: high impact glass reinforced nylon
Boot: thermoplastic rubber
Shaft: stainless steel
Suitable for right- and left-handed use
Connectors USB A
Power Via USB interface (5V DC)
Supply current: 32mA
Operating conditions Operating temperature: -25 °C to 85 °C
System integration
support
Windows XP, 2003 and 2000
Supported protocols USB 2.0*, Direct X (Gaming control)
Accessories (included) Blank text sheets for push-buttons,
Plastic cover for text sheet
Applications (not incl.) Supported by Axis PTZ video products with firmware
version 4.40 or later
Approvals EN55024:1998 EN55022 FCC Part 15 Subpart B, Class B
Dimensions (HxWxD)
and weight
156 x 169 x 126 mm (6.15” x 6.65” x 4.97”)
440 g
©2006, Axis Communications AB. The Axis logo is a registered trademark of Axis Communications AB. All other company names and products
are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.
www.axis.com
USB lead wire approx. 2200 length
*Backwards compatible with USB 1.x
