Axis A1601 User manual

AXISA1601NetworkDoorController
UserManual

AXISA1601NetworkDoorController
TableofContents
Solutionoverview...........................................3
Productoverview...........................................5
Findthedeviceonthenetwork................................7
Accessthedevice...............................................7
Howtoaccesstheproductfromtheinternet.........................7
Securepasswords...............................................7
TheOverviewpage..............................................8
Systemconguration........................................9
Congurationstepbystep......................................9
Selectalanguage...............................................9
SettheDateandTime............................................9
ConguretheNetworkSettings....................................10
Congurethehardware..........................................10
VerifytheHardwareConnections...................................16
Congurecardsandformats......................................17
CongureServices...............................................19
MaintenanceInstructions.........................................20
Eventconguration.........................................21
Viewtheeventlog..............................................21
Conguretheeventlog..........................................21
Howtosetupactionrules........................................21
Readerfeedback................................................23
Systemoptions.............................................25
Security.......................................................25
Network.......................................................27
Ports&Devices.................................................31
Maintenance...................................................31
Support.......................................................31
Advanced......................................................32
Troubleshooting............................................33
Resettofactorydefaultsettings...................................33
Howtocheckthecurrentrmware.................................33
Howtoupgradethermware.....................................33
Symptoms,possiblecausesandremedialactions......................34
Specications..............................................36
..............................................................36
LEDindicators..................................................36
Buttons.......................................................36
Connectors....................................................36
Safetyinformation..........................................42
Hazardlevels...................................................42
Othermessagelevels.............................................42
2

AXISA1601NetworkDoorController
Solutionoverview
Solutionoverview
ThenetworkdoorcontrollercaneasilybeconnectedtoandpoweredbyyourexistingIPnetworkwithnoneedforspecialcabling.
3

AXISA1601NetworkDoorController
Solutionoverview
Eachnetworkdoorcontrollerisanintelligentdevicethatiseasilymountedclosetoadoor.Itcanpowerandcontroluptotworeaders.
4

AXISA1601NetworkDoorController
Productoverview
Productoverview
1Doorconnectoronpage38(2x)
2Readerconnectoronpage37(2x)
3Controlbuttononpage36
4ReaderovercurrentLED
5RelayovercurrentLED
6uxiliaryconnectoronpage39
7Relayconnectoronpage39(2x)
8Relayjumper(2x)
9RelayLED(2x)
10Backupbatteryinputconnectoronpage41
11Powerconnectoronpage41
12PowerLED
13StatusLED
14NetworkLED
5

AXISA1601NetworkDoorController
Productoverview
15Networkconnectoronpage36
16Externalconnectoronpage40
17Reversiblecablecover
18Groundingposition
6

AXISA1601NetworkDoorController
indthedeviceonthenetwork
indthedeviceonthenetwork
TondAxisdevicesonthenetworkandassignthemIPaddressesinWindows®,useAXISIPUtilityorAXISDeviceManager.Both
applicationsarefreeandcanbedownloadedfromaxis.com/support.
FormoreinformationabouthowtondandassignIPaddresses,seethedocumentHowtoassignanIPaddressandaccessyour
deviceonthedevicepageataxis.com.
Accessthedevice
1.OpenabrowserandentertheIPaddressorhostnameoftheAxisdevice.
IfyoudonotknowtheIPaddress,useAXISIPUtilityorAXISDeviceManagertondthedeviceonthenetwork.Ifyou
haveaMaccomputer(OSX),gotoSafari,clickBonjourandselectthedevicefromthedrop-downlist.
2.Entertheusernameandpassword.Ifyouaccessthedeviceforthersttime,youmustsettherootpassword.See.
3.Thedevice’swebpageopensinyourbrowser.ThestartpageiscalledtheOverviewpage.
Howtoaccesstheprodctfromtheinternet
Anetworkrouterallowsproductsonaprivatenetwork(LAN)toshareasingleconnectiontotheinternet.Thisisdonebyforwarding
networktrafcfromtheprivatenetworktotheinternet.
Mostroutersarepre-conguredtostopattemptstoaccesstheprivatenetwork(LAN)fromthepublicnetwork(internet).
IftheAxisproductislocatedonanintranet(LAN)andyouwanttomakeitavailablefromtheother(WAN)sideofaNAT(Network
AddressTranslator)router,turnonNATtraversal.WithNATtraversalproperlycongured,allHTTPtrafctoanexternalHTTPport
intheNATrouterisforwardedtotheproduct.
owtoturnontheNAT-traversalfeature
•GotoSetup>AdditionalControllerConguration>SystemOptions>Network>TCP/IP>Advanced.
•ClickEnable.
•ManuallycongureyourNATroutertoallowaccessfromtheinternet.
Note
•Inthiscontext,a“router”referstoanynetworkroutingdevicesuchasaNATrouter,networkrouter,internetgateway,
broadbandrouter,broadbandsharingdevice,orasoftwaresuchasarewall.
•ForNATtraversaltowork,NATtraversalmustbesupportedbytherouter.TheroutermustalsosupportUPnP®.
Secrepasswords
Important
Axisdevicessendtheinitiallysetpasswordincleartextoverthenetwork.Toprotectyourdeviceaftertherstlogin,set
upasecureandencryptedHTTPSconnectionandthenchangethepassword.
Thedevicepasswordistheprimaryprotectionforyourdataandservices.Axisdevicesdonotimposeapasswordpolicyasthey
maybeusedinvarioustypesofinstallations.
Toprotectyourdatawestronglyrecommendthatyou:
•Useapasswordwithatleast8characters,preferablycreatedbyapasswordgenerator.
•Don’texposethepassword.
7

AXISA1601NetworkDoorController
indthedeviceonthenetwork
•Changethepasswordatarecurringinterval,atleastonceayear.
Howtosettherootpassword
ToaccesstheAxisproduct,youmustsetthepasswordforthedefaultadministratoruserroot.ThisisdoneintheCongureRoot
Passworddialog,whichopenswhentheproductisaccessedforthersttime.
Topreventnetworkeavesdropping,therootpasswordcanbesetviaanencryptedHTTPSconnection,whichrequiresanHTTPS
certicate.HTTPS(HypertextTransferProtocoloverSSL)isaprotocolusedtoencrypttrafcbetweenwebbrowsersandservers.The
HTTPScerticateensuresencryptedexchangeofinformation.SeeHTTPSonpage25.
Thedefaultadministratorusernamerootispermanentandcannotbedeleted.Ifthepasswordforrootislost,theproductmustbe
resettothefactorydefaultsettings.SeeResettofactorydefaultsettingsonpage33.
Tosetthepassword,enteritdirectlyinthedialog.
TheOverviewpage
TheOverviewpageintheproduct’swebpageshowsinformationaboutthedoorcontroller’sname,MACaddress,IPaddress,and
rmwareversion.Italsoenablesyoutoidentifythedoorcontrolleronthenetwork.
ThersttimeyouaccesstheAxisproduct,theOverviewpagewillpromptyoutocongurethehardware,tosetdateandtime,andto
congurethenetworksettings.Formoreinformationaboutconguringthesystem,seeConguration–stepbysteponpage9.
ToreturntotheOverviewpagefromtheproduct’sotherwebpages,clickOverviewinthemenubar.
8

AXISA1601NetworkDoorController
Systemconfiguration
Systemconfiguration
Toopentheproduct’ssetuppages,clickSetupinthetopright-handcorneroftheOverviewpage.
TheAxisproductcanbeconguredbyadministrators.Formoreinformationaboutusersandadministrators,seepage25.
Congration–stepbystep
Beforeyoustartusingtheaccesscontrolsystem,youshouldcompletethefollowingsetupsteps:
1.IfEnglishisnotyourrstlanguage,youmaywanttheproduct’swebpagetouseadifferentlanguage.SeeSelecta
languageonpage9.
2.Setthedateandtime.Seepage9.
3.Congurethenetworksettings.Seepage10.
4.Congurethedoorcontrollerandconnecteddevicessuchasreaders,locksandrequesttoexit(REX)devices.SeeCongure
thehardwareonpage10.
5.VerifytheHardwareConnections.Seepage16.
6.Congurecardsandformats.Seepage17.
Forinformationaboutmaintenancerecommendations,seeMaintenanceInstructionsonpage20.
Selectalangage
Thedefaultlanguageoftheproduct’swebpageisEnglish,butyoucanswitchtoanyofthelanguagesthatareincludedinthe
product’srmware.Forinformationaboutthelatestavailablermware,seewww.axis.com
Youcanswitchlanguagesinanyoftheproduct’swebpages.
Toswitchlanguages,clickthelanguagedrop-downlistandselectalanguage.Alltheproduct’swebpagesandhelppagesare
displayedintheselectedlanguage.
Note
•Whenyouswitchlanguages,thedateformatalsochangestoaformatcommonlyusedintheselectedlanguage.The
correctformatisdisplayedinthedataelds.
•Ifyouresettheproducttofactorydefaultsettings,theproduct’swebpageswitchesbacktoEnglish.
•Ifyourestoreorrestarttheproduct,orupgradethermware,theproduct’swebpagewillcontinuetousetheselected
language.
SettheDateandTime
TosetthedateandtimeoftheAxisproduct,gotoSetup>Date&Time.
Youcansetthedateandtimeinthefollowingways:
•Getthedateandtimefromanetworktimeprotocol(NTP)server.Seepage10.
•Setthedateandtimemanually.Seepage10.
•Getthedateandtimefromthecomputer.Seepage10.
Currentcontrollertimedisplaysthedoorcontroller’scurrentdateandtime(24hclock).
9

AXISA1601NetworkDoorController
Systemconfiguration
ThesameoptionsfordateandtimearealsoavailableintheSystemOptionspages.GotoSetup>AdditionalController
Conguration>SystemOptions>Date&Time.
GettheDateandTimefromaNetworkTimeProtocol(NTP)Server
1.GotoSetup>Date&Time.
2.SelectyourTimezonefromthedrop-downlist.
3.Ifdaylightsavingtimeisusedinyourregion,selectAdjustfordaylightsaving.
4.SelectSynchronizewithNTP.
5.SelectthedefaultDHCPaddressorentertheaddressofaNTPserver.
6.ClickSave.
WhensynchronizingwithanNTPserver,dateandtimeareupdatedcontinuouslybecausethedataispushedfromtheNTPserver.For
informationaboutNTPsettings,seeNTPCongurationonpage28.
IfyouuseahostnamefortheNTPserver,aDNSservermustbecongured.SeeDNSCongurationonpage28.
SettheDateandTimeManally
1.GotoSetup>Date&Time.
2.Ifdaylightsavingtimeisusedinyourregion,selectAdjustfordaylightsaving.
3.SelectSetdate&timemanually.
4.Enterthedesireddateandtime.
5.ClickSave.
Whensettingthedate&timemanually,dateandtimearesetonceandwillnotbeupdatedautomatically.Thismeansthatifthe
dateortimeneedstobeupdated,thechangesmustbemademanuallybecausethereisnoconnectiontoanexternalNTPserver.
GettheDateandTimefromtheCompter
1.GotoSetup>Date&Time.
2.Ifdaylightsavingtimeisusedinyourregion,selectAdjustfordaylightsaving.
3.SelectSetdate&timemanually.
4.ClickSyncnowandsave.
Whenusingthecomputertime,dateandtimearesynchronizedwiththecomputertimeonceandwillnotbeupdatedautomatically.
Thismeansthatifyouchangethedateortimeonthecomputeryouusetomanagethesystem,youshouldsynchronizeagain.
CongretheNetworkSettings
Tocongurethebasicnetworksettings,gotoSetup>NetworkSettingsortoSetup>AdditionalControllerConguration>
SystemOptions>Network>TCP/IP>Basic.
Formoreinformationaboutnetworksettings,seeNetworkonpage27.
Congrethehardware
Youcanconnectreaders,locksandotherdevicestotheAxisproductbeforeyoucompletethehardwareconguration.However,
itwillbeeasiertoconnectdevicesifyoucompletethehardwarecongurationrst.Thisisbecauseahardwarepinchartwillbe
10

AXISA1601NetworkDoorController
Systemconfiguration
availablewhenthecongurationiscomplete.Thehardwarepinchartisaguideonhowtoconnectdevicestothepinsandcanbe
usedasareferencesheetformaintenance.Formaintenanceinstructions,seepage20.
Ifconguringthehardwareforthersttime,selectoneofthefollowingmethods:
•Importahardwarecongurationle.Seepage1 1.
•Createanewhardwareconguration.Seepage1 1.
Note
Iftheproduct’shardwarehasnotbeenconguredbeforeorhasbeendeleted,ardwareCongurationwillbeavailablein
thenoticationpanelintheOverviewpage.
Howtoimportahardwarecongrationle
ThehardwarecongurationoftheAxisproductcanbecompletedfasterbyimportingahardwarecongurationle.
Byexportingthelefromoneproductandimportingittoothers,youcanmakemultiplecopiesofthesamehardwaresetupwithout
havingtorepeatthesamestepsoverandoveragain.Youcanalsostoreexportedlesasbackupsandusethemtorestoreprevious
hardwarecongurations.Formoreinformation,seeHowtoexportahardwarecongurationleonpage1 1.
Toimportahardwarecongurationle:
1.GotoSetup>ardwareConguration.
2.ClickImporthardwarecongurationor,ifahardwarecongurationalreadyexists,Resetandimporthardware
conguration.
3.Inthelebrowserdialogthatappears,locateandselectthehardwarecongurationle(*.json)onyourcomputer.
4.ClickOK.
Howtoexportahardwarecongrationle
ThehardwarecongurationoftheAxisproductcanbeexportedtomakemultiplecopiesofthesamehardwaresetup.Youcanalso
storeexportedlesasbackupsandusethemtorestoreprevioushardwarecongurations.
Note
Thehardwarecongurationofoorsisnotpossibletoexport.
Wirelesslocksettingsarenotincludedinthehardwarecongurationexport.
Toexportahardwarecongurationle:
1.GotoSetup>ardwareConguration.
2.ClickExporthardwareconguration.
3.Dependingonthebrowser,youmayneedtogothroughadialogtocompletetheexport.
Unlessotherwisespecied,theexportedle(*.json)issavedinthedefaultdownloadfolder.Youcanselectadownload
folderinthewebbrowser’susersettings.
Createanewhardwarecongration
Followtheinstructionsaccordingtoyourrequirements:
•Howtocreateanewhardwarecongurationwithoutperipheralsonpage12
•Howtocreateanewhardwarecongurationforwirelesslocksonpage14
•Howtocreateanewhardwarecongurationwithelevatorcontrol(XIS9188)onpage15
11

AXISA1601NetworkDoorController
Systemconfiguration
Howtocreateanewhardwarecongrationwithotperipherals
1.GotoSetup>ardwareCongurationandclickStartnewhardwareconguration.
2.EnteranamefortheAxisproduct.
3.SelectthenumberofconnecteddoorsandclickNext.
4.Congurethedoormonitors(doorpositionsensors)andlocksaccordingtoyourrequirementsandclickNext.Formore
informationabouttheavailableoptions,seeHowtoconguredoormonitorsandlocksonpage12.
5.CongurethereadersandREXdevicesthatwillbeusedandclickFinish.Formoreinformationabouttheavailableoptions,
seeHowtocongurereadersandREXdevicesonpage13.
6.ClickCloseorclickthelinktoviewthehardwarepinchart.
Howtocongredoormonitorsandlocks
Whenyouhaveselectedadooroptioninthenewhardwareconguration,youcancongurethedoormonitorsandlocks.
1.Ifadoormonitorwillbeused,selectDoormonitorandthenselecttheoptionthatmatcheshowthedoormonitor
circuitswillbeconnected.
2.Ifthedoorlockshalllockimmediatelyafterthedoorhasbeenopened,selectCancelaccesstimeoncedoorisopened.
Ifyouwanttodelaytherelock,setthetimeofthedelayinmillisecondsinRelocktime.
3.Specifythedoormonitortimeoptionsor,ifnodoormonitorwillbeused,thelocktimeoptions.
4.Selecttheoptionsthatmatchhowthelockcircuitswillbeconnected.
5.Ifalockmonitorwillbeused,selectLockmonitorandthenselecttheoptionsthatmatchhowthelockmonitorcircuits
willbeconnected.
6.Iftheinputconnectionsfromreaders,REXdevices,anddoormonitorsshallbesupervised,selectEnablesupervisedinputs.
Formoreinformation,seeHowtousesupervisedinputsonpage14.
Note
•Mostlock,doormonitor,andreaderoptionscanbechangedwithoutresettingandstartinganewhardwareconguration.
GotoSetup>ardwareReconguration.
•Youcanconnectonelockmonitorperdoorcontroller.Soifyouusedouble-lockdoors,onlyoneofthelockscanhavealock
monitor.Iftwodoorsareconnectedtothesamedoorcontroller,lockmonitorscannotbeused.
Abotdoormonitorandtimeoptions
Thefollowingdoormonitoroptionsareavailable:
•DoormonitorSelectedbydefault.Eachdoorhasitsowndoormonitorthat,forexample,willsignalwhenthedoorhas
beenforcedopenoropentoolong.Deselectifnodoormonitorwillbeused.
-Opencircuit=CloseddoorSelectifthedoormonitorcircuitisnormallyopen.Thedoormonitorgivesthedoor
opensignalwhenthecircuitisclosed.Thedoormonitorgivesthedoorclosedsignalwhenthecircuitisopen.
-Opencircuit=OpendoorSelectifthedoormonitorcircuitisnormallyclosed.Thedoormonitorgivesthedoor
opensignalwhenthecircuitisopen.Thedoormonitorgivesthedoorclosedsignalwhenthecircuitisclosed.
•CancelaccesstimeoncedoorisopenedSelecttopreventtailgating.Thelockwillbelockedassoonasthedoor
monitorindicatesthatthedoorhasbeenopened.
Thefollowingdoortimeoptionsarealwaysavailable:
12

AXISA1601NetworkDoorController
Systemconfiguration
•AccesstimeSetthenumberofsecondsthedoorshallremainunlockedafteraccesshasbeengranted.Thedoorremains
unlockeduntilthedoorhasbeenopenedoruntilthesettimehasbeenreached.Thedoorwilllockwhenitclosesregardless
ofwhethertheaccesstimehasexpiredornot.
•LongaccesstimeSetthenumberofsecondsthedoorshallremainunlockedafteraccesshasbeengranted.Longaccess
timeoverridesthealreadysetaccesstimeandwillbeenabledforuserswithlongaccesstimeselected.
SelectDoormonitortomakethefollowingdoortimeoptionsavailable:
•OpentoolongtimeSetthenumberofsecondsthedoorisallowedtostayopen.Ifthedoorisstillopenwhentheset
timehasbeenreached,thedooropentoolongalarmistriggered.Setupanactionruletocongurewhichactionthe
opentoolongeventshalltrigger.
•Pre-alarmtimeApre-alarmisawarningsignalthatistriggeredbeforetheopentoolongtimehasbeenreached.It
informstheadministratorandwarns,dependingonhowtheactionrulehasbeensetup,thepersonenteringthedoor
thatthedoorneedstobeclosedtoavoidthedooropentoolongalarmtogooff.Setthenumberofsecondsbeforethe
dooropentoolongalarmistriggeredthesystemshallgivethepre-alarmwarningsignal.Todisablethepre-alarm,set
thepre-alarmtimeto0.
Forinformationabouthowtosetupanactionrule,seeHowtosetupactionrulesonpage21.
Abotlockoptions
Thefollowinglockcircuitoptionsareavailable:
•RelayCanonlybeusedononelockperdoorcontroller.Iftwodoorsareconnectedtothedoorcontroller,arelaycan
onlybeusedonthelockoftheseconddoor.
•NoneOnlyavailableforLock2.Selectifonlyonelockwillbeused.
Thefollowinglockmonitoroptionsareavailableforsingle-doorcongurations:
•LockmonitorSelecttomakethelockmonitorcontrolsavailable.Thenselectthelockthatshallbemonitored.Alock
monitorcanonlybeusedondouble-lockdoorsandcannotbeusediftwodoorsareconnectedtothedoorcontroller.
-Opencircuit=LockedSelectifthelockmonitorcircuitisnormallyclosed.Thelockmonitorgivesthedoor
unlockedsignalwhenthecircuitisclosed.Thelockmonitorgivesthedoorlockedsignalwhenthecircuitisopen.
-Opencircuit=UnlockedSelectifthelockmonitorcircuitisnormallyopen.Thelockmonitorgivesthedoor
unlockedsignalwhenthecircuitisopen.Thelockmonitorgivesthedoorlockedsignalwhenthecircuitisclosed.
HowtocongrereadersandREXdevices
Whenyouhaveconguredthedoormonitorsandlocksinthenewhardwareconguration,youcancongurethereadersand
requesttoexit(REX)devices.
1.Ifareaderwillbeused,selectthecheckboxandthenselecttheoptionsthatmatchthereader’scommunicationprotocol.
13

AXISA1601NetworkDoorController
Systemconfiguration
2.IfaREXdevicesuchasabutton,sensor,orpushbarwillbeused,selectthecheckboxandthenselecttheoptionthat
matcheshowtheREXdevice’scircuitswillbeconnected.
IftheREXsignaldoesnotinuencedooropening(forexamplefordoorswithmechanicalhandlesorpushbars),select
REXdoesnotunlockdoor.
3.IfconnectingmorethanonereaderorREXdevicetothedoorcontroller,dotheprevioustwostepsagainuntileach
readerorREXdevicehasthecorrectsettings.
AbotreaderandREXdeviceoptions
Thefollowingreaderoptionsareavailable:
•WiegandSelectforreadersthatuseWiegandprotocols.ThenselecttheLEDcontrolthatissupportedbythereader.
ReaderswithsingleLEDcontrolusuallytogglebetweenredandgreen.ReaderswithdualLEDcontrolusedifferentwires
fortheredandgreenLEDs.ThismeansthattheLEDsarecontrolledindependentlyofeachother.WhenbothLEDsareon,
thelightappearstobeamber.Seethemanufacturer’sinformationaboutwhichLEDcontrolthereadersupports.
•OSDP,RS485halfduplexSelectforRS485readerswithhalfduplexsupport.Seethemanufacturer’sinformation
aboutwhichprotocolthereadersupports.
ThefollowingREXdeviceoptionsareavailable:
•ActivelowSelectifactivatingtheREXdeviceclosesthecircuit.
•ActivehighSelectifactivatingtheREXdeviceopensthecircuit.
•REXdoesnotunlockdoorSelectiftheREXsignaldoesnotinuencedooropening(forexamplefordoorswith
mechanicalhandlesorpushbars).Thedoorforcedopenalarmwillnotbetriggeredaslongastheuseropensthedoor
withintheaccesstime.DeselectifthedoorshallunlockautomaticallywhentheuseractivatestheREXdevice.
Note
Mostlock,doormonitor,andreaderoptionscanbechangedwithoutresettingandstartinganewhardwareconguration.
GotoSetup>ardwareReconguration.
Howtosespervisedinpts
Supervisedinputsreportonthestatusoftheconnectionbetweenthedoorcontrollerandthedoormonitors.Iftheconnection
isinterrupted,aneventisactivated.
Tousesupervisedinputs:
1.Installendoflineresistorsonalltheusedsupervisedinputs.Seetheconnectiondiagramonpage38.
2.GotoSetup>ardwareRecongurationandselectEnablesupervisedinputs.Youcanalsoenablesupervisedinputs
duringthehardwareconguration.
Abotspervisedinptcompatibility
Thefollowingfunctionsupportssupervisedinputs:
•Doormonitor.SeeDoorconnectoronpage38.
Howtocreateanewhardwarecongrationforwirelesslocks
1.GotoSetup>ardwareCongurationandclickStartnewhardwareconguration.
2.EnteranamefortheAxisproduct.
3.Inthelistofperipherals,selectamanufacturerforawirelessgateway.
4.Ifyouwanttoconnectawireddoor,selectthe1DoorcheckboxandclickNext.Ifnodoorisincluded,clickFinish.
14

AXISA1601NetworkDoorController
Systemconfiguration
5.Dependingonwhatlockmanufactureryougot,proceedaccordingtooneofthebullets:
-ASSAAperio:ClickthelinktoviewthehardwarepinchartorclickCloseandgotoSetup>ardware
Recongurationtocompletetheconguration,seeddssaperioTMdoorsanddevicesonpage15
-SmartIntego:ClickthelinktoviewthehardwarepinchartorclickClickheretoselectwirelessgatewayand
conguredoorstocompletetheconguration,seeHowToCongureSmartIntegoonpage19.
AddAssaAperioTMdoorsanddevices
BeforeaddingawirelessdoortothesystemitneedstobepairedwiththeconnectedAssaAperiocommunicationhub,using
AperioPAP(Aperioprogrammingapplicationtool).
Toaddawirelessdoor:
1.GotoSetup>ardwareReconguration.
2.UnderWirelessDoorsandDevicesclickAdddoor.
3.IntheDoornameeld:Enteradescriptivename.
4.IntheIDeldunderLock:Enterthesix-character-longaddressofthedevicethatyouwanttoadd.Thedeviceaddressis
printedontheproductlabel.
5.Optionally,underDoorpositionsensor:ChooseBuiltindoorpositionsensororExternaldoorpositionsensor.
Note
Ifusinganexternaldoorpositionsensor(DPS),makesurethattheAperiolockdevicehassupportfordoorhandlestate
detectionbeforeconguringit.
6.Optionally,intheIDeldunderDoorpositionsensor:Enterthesix-character-longaddressofthedevicethatyouwantto
add.Thedeviceaddressisprintedontheproductlabel.
7.ClickAdd.
Howtocreateanewhardwarecongrationwithelevatorcontrol(AXISA9188)
Important
BeforecreatingaHWcongurationyouneedtoaddauserinAXISA9188NetworkI/ORelayModule.GototheA9188web
interface>Preferences>Additionaldeviceconguration>Basicsetup>Users>Add>Usersetup.
Note
Max2AXIS9188NetworkI/ORelayModulescanbeconguredwitheachAxisNetworkDoorController
1.Inthedoorcontroller’swebpage,gotoSetup>ardwareCongurationandclickStartnewhardwareconguration.
2.EnteranamefortheAxisproduct.
3.Inthelistofperipherals,selectElevatorcontroltoincludeanAXISA9188NetworkI/ORelayModuleandclickNext.
4.Enteranamefortheconnectedreader.
5.SelectthereaderprotocolthatwillbeusedandclickFinish.
6.ClickNetworkPeripheralstocompletethecongurationseeHowtoaddandsetupnetworkperipheralsonpage16or
clickthelinktogotothehardwarepinchart.
15

AXISA1601NetworkDoorController
Systemconfiguration
Howtoaddandsetpnetworkperipherals
Important
•BeforeyousetupthenetworkperiphalsyouneedtoaddauserinAXISA9188NetworkI/ORelayModule.GototheAXIS
A9188webinterface>Preferences>Additionaldeviceconguration>Basicsetup>Users>Add>Usersetup.
•Don’taddanotherAXISA1001NetworkDoorControllerasanetworkperipheral.
1.GotoSetup>NetworkPeriphalstoaddadevice
2.Findyourdevice(s)underDiscovereddevices.
3.ClickAddthisdevice
4.Enteranameforthedevice
5.EntertheAXISA9188usernameandpassword
6.ClickAdd.
Note
YoucanmanuallyaddnetworkperiphalsbyenteringMACaddressorIPaddressintheManuallyadddevicedialog.
Important
Ifyouwanttodeleteaschedule,rstmakesureit’snotusedbythenetworkI/Orelaymodule.
HowtosetpI/Osandrelaysinnetworkperipherals
Important
BeforesettingupthenetworkperipheralsyouneedtoaddauserinAXISA9188NetworkI/ORelayModule.GototheAXIS
A9188webinterface>Preferences>Additionaldeviceconguration>Basicsetup>Users>Add>Usersetup.
1.GotoSetup>NetworkPeriphalsandclickontheAddeddevicesrow.
2.ChoosewhichI/Osandrelaystosetasoor.
3.ClickSetasoorandenteraname.
4.ClickAdd.
Note
InAXISEntryManageryoucanaddmaximum16oors.
VerifytheHardwareConnections
Whenthehardwareinstallationandcongurationiscomplete,andanytimeduringthedoorcontroller’slifetime,youcanverifythe
functionoftheconnecteddoormonitors,NetworkI/ORelayModules,locksandreaders.
Toverifythecongurationandaccessthevericationcontrols,gotoSetup>ardwareConnectionVerication.
VericationControlsDoors
•DoorstateVerifythecurrentstateofthedoormonitor,dooralarmsandlocks.ClickGetcurrentstate.
•LockManuallytriggerthelock.Bothprimarylocksandsecondarylocksifthereareanywillbeaffected.ClickLockor
Unlock.
•LockManuallytriggerthelocktograntaccess.Onlyprimarylockswillbeaffected.ClickAccess.
16

AXISA1601NetworkDoorController
Systemconfiguration
•Reader:FeedbackVerifythereaderfeedback,forexamplesoundsandLEDsignals,fordifferentcommands.Selectthe
commandandclickTest.Whichtypesoffeedbackthatareavailabledependsonthereader.Formoreinformation,see
Readerfeedbackonpage23.Seealsothemanufacturer’sinstructions.
•Reader:TamperingGetinformationaboutthelasttamperingattempt.Thersttamperingattemptwillberegistered
whenthereaderisinstalled.ClickGetlasttampering.
•Reader:CardswipeGetinformationaboutthelastswipedcardorothertypeofusertokenacceptedbythereader.
ClickGetlastcredential.
•REXGetinformationaboutthelasttimetherequesttoexit(REX)devicewaspressed.ClickGetlastREX.
VericationControlsFloors
•FloorstateVerifythecurrentstateoftheooraccess.ClickGetcurrentstate.
•Floorlock&unlockManuallytriggertheooraccess.Bothprimarylocksandsecondarylocksifthereareanywill
beaffected.ClickLockorUnlock.
•FlooraccessManuallygranttemporaryaccesstotheoor.Onlyprimarylockswillbeaffected.ClickAccess.
•ElevatorReader:FeedbackVerifythereaderfeedback,forexamplesoundsandLEDsignals,fordifferentcommands.
SelectthecommandandclickTest.Whichtypesoffeedbackthatareavailabledependsonthereader.Formore
information,seeReaderfeedbackonpage23.Seealsothemanufacturer’sinstructions.
•ElevatorReader:TamperingGetinformationaboutthelasttamperingattempt.Thersttamperingattemptwillbe
registeredwhenthereaderisinstalled.ClickGetlasttampering.
•ElevatorReader:CardswipeGetinformationaboutthelastswipedcardorothertypeofusertokenacceptedbythe
reader.ClickGetlastcredential.
•REXGetinformationaboutthelasttimetherequesttoexit(REX)devicewaspressed.ClickGetlastREX.
Congrecardsandformats
Thedoorcontrollerhasafewpredenedcommonlyusedcardformatsthatyoucanuseastheyareormodifyasrequired.Youcan
alsocreatecustomcardformats.Eachcardformathasadifferentsetofrules,eldmaps,forhowtheinformationstoredonthecard
isorganized.Bydeningacardformatyoutellthesystemhowtointerprettheinformationthatthecontrollergetsfromthereader.
Forinformationaboutwhichcardformatsthereadersupports,seethemanufacturer’sinstructions.
Toenablecardformats:
1.GotoSetup>Congurecardsandformats.
2.Selectoneormorecardformatsthatmatchthecardformatusedbytheconnectedreaders.
Tocreatenewcardformats:
1.GotoSetup>Congurecardsandformats.
2.ClickAddcardformat.
3.IntheAddcardformatdialog,enteraname,adescription,andthebitlengthofthecardformat.SeeCardformat
descriptionsonpage18.
4.ClickAddeldmapandentertherequiredinformationintheelds.SeeFieldmapsonpage18.
5.Toaddmultipleeldmaps,repeatthepreviousstep.
ToexpandanitemintheCardformatslistandviewthecardformatdescriptionsandeldmaps,click.
Toeditacardformat,clickandchangethecardformatdescriptionsandeldmapsasrequired.ThenclickSave.
17

AXISA1601NetworkDoorController
Systemconfiguration
TodeleteaeldmapintheEditcardformatorAddcardformatdialog,click
Todeleteacardformat,click.
Important
•Youcanonlyenableanddisablecardformatsifthedoorcontrollerhasbeenconguredwithatleastonereader.See
Congurethehardwareonpage10andHowtocongurereadersandREXdevicesonpage13.
•Twocardformatswiththesamebitlengthcannotbeactivethesametime.Forexample,ifyouhavedenedtwo32-bit
cardformats,“FormatA”and“FormatB”,andyouhaveenabled“FormatA”,youcannotenable“FormatB”without
disabling“FormatA”rst.
•Ifnocardformatshavebeenenabled,youcanusetheCardrawonlyandCardrawandPINidenticationtypesto
identifyacardandgrantaccesstousers.However,wedonotrecommendthissincedifferentreadermanufacturers
orreadersettingscangeneratedifferentcardrawdata.
Cardformatdescriptions
•Name(required)Enteradescriptivename.
•DescriptionEnteradditionalinformationasdesired.ThisinformationisonlyvisibleintheEditcardformatandAdd
cardformatdialogs.
•Bitlength(required)Enterthebitlengthofthecardformat.Thishastobeanumberbetween1and1000000000.
Fieldmaps
•Name(required)Entertheeldmapnameunspaced,forexampleOddParity.
Examplesofcommoneldmapsinclude:
-ParityParitybitsareusedforerrordetection.Paritybitsareusuallyaddedtothebeginningorendofa
binarycodestringandindicateifthenumberofbitsisevenorodd.
-EvenParityEvenparitybitsmakesurethatthereisanevennumberofbitsinthestring.Thebitsthathave
thevalue1arecounted.Ifthecountisalreadyeven,theparitybitvalueissetto0.Ifthecountisodd,the
evenparitybitvalueissetto1,makingthetotalcountanevennumber.
-OddParityOddparitybitsmakesurethatthereisanoddnumberofbitsinthestring.Thebitsthathave
thevalue1arecounted.Ifthecountisalreadyodd,theoddparitybitvalueissetto0.Ifthecountiseven,
theparitybitvalueissetto1,makingthetotalcountanoddnumber.
-FacilityCodeFacilitycodesaresometimesusedforverifyingthatthetokenmatchestheorderedenduser
credentialbatch.Inlegacyaccesscontrolsystems,thefacilitycodewasusedforadegradedvalidation,allowing
entrytoeveryemployeeinthecredentialbatchthathadbeenencodedwithamatchingsitecode.Thiseldmap
name,whichiscasesensitive,isrequiredfortheproducttovalidateonfacilitycode.
-CardNrThecardnumberoruserIDiswhatismostcommonlyvalidatedinaccesscontrolsystems.Thiseld
mapname,whichiscasesensitive,isrequiredfortheproducttovalidateoncardnumber.
-CardNrHexThecardnumberbinarydataisencodedashex-lowercasenumbersintheproduct.Itisprimarily
usedfortroubleshootingwhyyouarenotgettingtheexpectedcardnumberfromthereader.
•Range(required)Enterthebitrangeoftheeldmap,forexample1,217,1833,and34.
•Encoding(required)Selecttheencodingtypeofeacheldmap.
-BinLE2IntBinarydataisencodedasintegernumbersinlittleendianbitorder.Integermeansthatitneedsto
beawholenumber(nodecimals).Littleendianbitordermeansthattherstbitisthesmallest(leastsignicant).
-BinBE2IntBinarydataisencodedasintegernumbersinbigendianbitorder.Integermeansthatitneedstobe
awholenumber(nodecimals).Bigendianbitordermeansthattherstbitisthebiggest(mostsignicant).
18

AXISA1601NetworkDoorController
Systemconfiguration
-BinLE2exBinarydataisencodedashex-lowercasenumbersinlittleendianbitorder.Thehexadecimal
system,alsoknownasthebase-16numbersystem,consistsof16uniquesymbols:thenumbers09andthe
lettersaf.Littleendianbitordermeansthattherstbitisthesmallest(leastsignicant).
-BinBE2exBinarydataisencodedashex-lowercasenumbersinbigendianbitorder.Thehexadecimalsystem,
alsoknownasthebase-16numbersystem,consistsof16uniquesymbols:thenumbers09andthelettersaf.
Bigendianbitordermeansthattherstbitisthebiggest(mostsignicant).
-BinLEIBO2IntBinarydataisencodedinthesamewayasforBinLE2Int,butthecardrawdataisreadwith
invertedbyteorderinamultiple-bytesequencebeforeeldmapsaretakenouttobeencoded.
-BinBEIBO2IntBinarydataisencodedlikeforBinBE2Int,butthecardrawdataisreadwithinvertedbyteorder
inamultiple-bytesequencebeforetheeldmapsaretakenouttobeencoded.
Forinformationaboutwhicheldmapsyourcardformatuses,seethemanufacturer’sinstructions.
CongreServices
TheCongureServicesintheSetuppageisusedtoaccessthesetupfortheexternalservicesthatcanbeusedwiththedoorcontroller.
SmartIntego
SmartIntegoisawirelesssolutionthatincreasesthenumberofdoorsadoorcontrollercanhandle.
PrereqisitesSmartIntego
ThefollowingprerequisitesneedstobemetbeforeproceedingwiththeSmartIntegoconguration:
•Acsv-leneedstobecreated.Thecsv-lecontainsinformationaboutwhatGatewayNodeanddoorsthatareusedinyour
SmartIntegosolution.TheleiscreatedinastandalonesoftwareprovidedbyaSimonsVosspartner.
•TheHardwareCongurationofSmartIntegohasbeendone,seeHowtocreateanewhardwarecongurationforwireless
locksonpage14.
Note
•SmartIntegoCongurationtoolmustbeversion2.1.6452.23485,build2.1.6452.23485(8/31/20171:02:50PM)orlater.
•TheAdvancedEncryptionStandard(AES)isnotsupportedforSmartIntego,andmustthereforebedisabledinthe
SmartIntegoCongurationtool.
HowToCongreSmartIntego
Note
•Makesurethatprerequisiteslistedhavebeenmet.
•Forincreasedvisibilityofthebatterystatus,gotoSetup>Congureeventandalarmslogs,andaddeitherDoor—
BatteryalarmorIdPoint—Batteryalarmasanalarm.
•ThedoormonitorsettingscomefromtheimportedCSVle.Youshouldn'tneedtochangethissettinginanormal
installation.
1.ClickBrowse...,selectthecsv-leandclickUploadle.
2.SelectaGatewayNodeandclickNext.
3.Apreviewofthenewcongurationisshown.Disablethedoormonitorsifneeded.
4.ClickCongure.
5.Anoverviewofthedoorsincludedinthecongurationisshown.ClickSettingstocongureeachdoorindividually.
19

AXISA1601NetworkDoorController
Systemconfiguration
Howtore-congreSmartIntego
1.ClickSetupinthetopmenu.
2.ClickCongureServices>Settings.
3.ClickRe-congure.
4.ClickBrowse...,selectthecsv-leandclickUploadle.
5.SelectaGatewayNodeandclickNext.
6.Apreviewofthenewcongurationisshown.Disablethedoormonitorsifneeded.
Note
ThedoormonitorsettingscomefromtheimportedCSVle.Youshouldn'tneedtochangethissettinginanormalinstallation.
7.ClickCongure.
8.Anoverviewofthedoorsincludedinthecongurationisshown.ClickSettingstocongureeachdoorindividually.
MaintenanceInstrctions
Tokeeptheaccesscontrolsystemrunningsmoothly,Axisrecommendsregularmaintenanceoftheaccesscontrolsystem,including
doorcontrollersandconnecteddevices.
Domaintenanceatleastonceayear.Thesuggestedmaintenanceprocedureincludes,butisnotlimitedto,thefollowingsteps:
•Makesurealltheconnectionsbetweenthedoorcontrollerandtheexternaldevicesaresecure.
•Verifyallthehardwareconnections.SeeVericationControlsDoorsonpage16.
•Verifythatthesystem,includingtheconnectedexternaldevices,functionscorrectly.
-Swipeacardandtestthereaders,doors,andlocks.
-IfthesystemincludesREXdevices,sensorsorotherdevices,testthemaswell.
-Ifactivated,testthetamperingalarms.
Iftheresultsfromanyofthestepsaboveindicatefaultsorunexpectedbehavior:
-Testthesignalsofthewiresusingappropriateequipmentandcheckifthewiresorcablesaredamaged
inanyway.
-Replacealldamagedorfaultycablesandwires.
-Oncethecablesandwireshavebeenreplaced,verifyallthehardwareconnectionsagain.SeeVerication
ControlsDoorsonpage16.
•Ifthedoorcontrollerisnotbehavingasexpected,seeTroubleshootingonpage33andMaintenanceonpage31for
moreinformation.
20