Axis Axis 216FD User manual

DATASHEET
AXIS 216FD-V is a discreet fixed dome network camera
specifically adapted for indoor environments potentially
exposed to vandalism. AXIS 216FD has a lighter,
tamper-resistant casing and is also suitable for indoor
video surveillance. AXIS 216FD Network Cameras are
easy to install, allowing flexible mounting on wall or
ceiling.
Simultaneous MPEG-4 and Motion JPEG video streams
allow for optimization of image quality and bandwidth
efficiency.
The AXIS 216FD family offers a choice of professional networked fixed dome solutions for exposed
indoor locations. Compact and discreet, they are ideal for the indoor surveillance of retail stores,
schools, prisons, banks and other office buildings.
AXIS 216FD/216FD-V Network Cameras
Discreet cameras for demanding indoor video surveillance.
> Discreet and compact
design
> Simultaneous MPEG-4
and Motion JPEG
> Two-way audio
> Power over Ethernet
> Powerful event
management
With two-way audio support, AXIS 216FD and
AXIS 216FD-V allow remote users to not only view
but also listen to and communicate with visitors and
intruders.
The event management capabilities ensure efficient use of
the cameras in the network video system. This includes
video motion detection, audio detection, active tampering
alarm and alarm buffering.

Technical specifications – AXIS 216FD/216FD-V Network Cameras
www.axis.com
©2008 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.
32272/EN/R1/0809
Camera
Models AXIS 216FD: Tamper-resistant casing
AXIS 216FD-V: Vandal-resistant casing
Image sensor 1/4” Progressive scan RGB CMOS
Lens Varifocal 2.8 – 10 mm, F1.3, DC-iris
Angle of view: 20° – 73° horizontal
Minimum
illumination
1 lux, F1.3
Shutter time 1/15000 s to 1/4 s
Camera angle
adjustment
Pan 360°, tilt 170°, rotation 340°
Video
Video
compression
MPEG-4 Part 2 (ISO/IEC 14496-2)
Motion JPEG
Resolutions 160x120 - 640x480
Frame rate
MPEG-4
Up to 30 fps in VGA
Frame rate
Motion JPEG
Up to 30 fps in VGA
Video streaming Simultaneous MPEG-4 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR MPEG-4
Image settings Compression, color, brightness, sharpness, white balance,
exposure control, rotation, fine tuning of behavior at low light
Text and image overlay
Privacy mask
Audio
Audio streaming Two-way, half-duplex
Audio
compression
AAC LC 8 kHz
G.711 PCM 8 kHz
G.726 ADPCM 8 kHz
Configurable bit rate
Audio input/
output
Built-in microphone, external microphone input or line input,
line level output
Network
Security Password protection, IP address filtering, HTTPS encryption,
IEEE 802.1X network access control, user access log
Supported
protocols
IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP,
TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
System integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Intelligent video Video motion detection, active tampering alarm, audio detection
Alarm triggers Intelligent video and external input
Alarm events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video buffer 9 MB pre- and post alarm
General
Casing AXIS 216FD: Tamper-resistant casing
AXIS 216FD-V: 1000 kg (2200 lb.) impact-resistant casing
Processors and
memory
ARTPEC-A, 32MB RAM, 8MB Flash
Power 4.9 – 5.1 V DC max 3.6 W
Power over Ethernet IEEE 802.3af Class 1
Connectors RJ-45 10BASE-T/100BASE-TX PoE, DC jack
Terminal block for 1 alarm input and 1 output
3.5 mm mic/line in, 3.5 mm line out
Operating
conditions
0 – 50 °C (32 – 122 °F)
Humidity 20 – 80% RH (non-condensing)
Approvals EN 55022 Class B, EN 55024, EN 61000-3-2, EN 61000-3-3,
FCC Part 15 Subpart B Class B, VCCI Class B, ICES-003 Class B,
C-tick AS/NZS CISPR 22, EN 60950-1
Power supply: EN 60950-1, UL, CSA
Weight AXIS 216FD: 425 g (0.94 lb.)
AXIS 216FD-V: 580 g (1.28 lb.)
Included
accessories
Power supply, mounting and connector kits, Installation Guide,
CD with installation tools, recording software and User’s
Manual, Windows decoder 1-user license
Dimensions
Versatile adjustment of
camera angle at installation
Image
balance
ring
Tilt adjustment
screw
Locking screw
for pan adjustment
94 mm (3.7")
144 mm (5.7") 89 mm (3.5")
127 mm (5")
132 mm (5.2")
Optional accessories
Versatile adjustment of
camera angle at installation
Image
balance
ring
Tilt adjustment
screw
Locking screw
for pan adjustment
94 mm (3.7")
144 mm (5.7") 89 mm (3.5")
127 mm (5")
132 mm (5.2")
Versatile adjustment of
camera angle at installation
Image
balance
ring
Tilt adjustment
screw
Locking screw
for pan adjustment
94 mm (3.7")
144 mm (5.7") 89 mm (3.5")
127 mm (5")
132 mm (5.2")
Various mounting kits
Drop-ceiling mount kit, transparent
or smoked cover
Optional casings with smoked
cover or black casing
More information is available at www.axis.com
For information on AXIS Camera Station and
video management software from
Axis’ Application Development Partners,
see www.axis.com/products/video/software/