Aybey Elektronik ALYA Series User manual

APPENDIX-3 LANDING OPERATION PANEL INSTALLATION
ALYA
ALYA SERIES
SERIAL COMMUNICATION LOP
INSTALLATION MANUAL
Document Name : ALYA User and Installation Manual
Display Type :
Document Code : --
Document Version : 1.05

F/7.5.5.02.127 R:0 1 ALYA
Contents
Chapter 1: General Features....................................................................2
Chapter 2: Mechanical Installation .........................................................3
Chapter 3: Electrical Connections............................................................4
Chapter 4: Operation and Adjustment Operations ...............................5
Chapter 5: Caution ...................................................................................6

F/7.5.5.02.127 R:0 2 ALYA
Chapter 1: General Features
1.1. Product Descprition
•It is a surface mounted landing operating panel.
•It corresponds with EN81-70.
•Used with Aybey T-Series button model.
•Single and double button options are available.
•Compatible with Aybey AE-MAESTRO and ALC series control panels.
•Button LEDs are double colors (white / red or white / blue).
1.2. ALYA LOP Contents
The products included in the package for each lop are specified in the table
below.
Table1: Package Includings
No
Product
Pieces
1
ALYA Serial Communication LOP
Number of Floors
2
M7 Mounting Dowels
4 x Number of Floors
3
M4x35 Mounting Screws
4 x Number of Floors
4
User Manual and Installation Manual
1
5
Terminating Resistor for systems without a pit
board with CAN interface.
1

F/7.5.5.02.127 R:0 3 ALYA
1.3. Mechanical Measurements
Chapter 2: Mechanical Installation
1. Open the front cover by pressing the spring mechanism at the bottom
center of the ALYA LOP with a screwdriver.
2. Mark the holes of screws and cable by placing the rear plate onto wall
you want to install.
3. Drill the holes (shown on Figure 1 by X) for M7 dowels.
4. make a hole into the wall for the lop connection cable coming from the
control panel, in the dimensions indicated by E in Figure 1.
5. Dowels are placed in the holes .

F/7.5.5.02.127 R:0 4 ALYA
6. In order to completed the mechanical installation of the lop, the back
cover is fixed to the wall using M4x35 screws and electrical connections
are made.
7. After the settings related to the configuration are complete, close the
front cover.
Chapter 3: Electrical Connections
1. Canbus cables of LOPs are connected to the related terminals inside the
control panel. (100-1000-CL-CH).
2. Cable from the control panel are connected to the nearest LOP through
hole as shown figure 1 E.
3. As shown in Figure 3, it is continued to be applied in a way that each LOP
is connected in series with the LOP of the next floor.
4. If there is no other CANBus serial communication unit to be connected to
the end of the line after the last LOP, a termination resistor is connected
to the white rectangular socket of the LOP.
Figure 3: Electrical Connection Diagram

F/7.5.5.02.127 R:0 5 ALYA
Chapter 4: Operation and Adjustment Operations
The only setting made on the board is the floor ID number. This setting is made
with the help of the switches on the board. ID can be set from the 0th floor to the
63rd floor with the BINARY number system.It is done with switches starting from
ID5 to ID0.
Figure 4 : Example of 0th floor ID Setting
Table 2: ID (Floor Number) Settings
ID
ID5
ID4
ID3
ID2
ID1
ID0
0
Off
Off
Off
Off
Off
Off
1
Off
Off
Off
Off
Off
On
2
Off
Off
Off
Off
On
Off
3
Off
Off
Off
On
On
Off
4
Off
Off
Off
On
Off
Off
:
:
:
:
:
:
:
:
:
:
:
:
:
:
60
On
On
On
On
Off
Off
61
On
On
On
On
Off
On
62
On
On
On
On
On
Off
63
On
On
On
On
On
On

F/7.5.5.02.127 R:0 6 ALYA
Chapter 5: Caution
1. Stainless steel cleaner should be used for cleaning the panel.
2. No detergent or acid should be used to clean the panel.
3. LOPs should not come into contact with any liquid.
4. In case of any malfunction,LOP should be de-energized and Aybey
Electronic Technical Service should be contacted.
















AYBEY ELEKTRONİK SAN.TİC.A.Ş.
Sanayi Mah. Hızır Reis Cad. No:26/2 Pendik-İstanbul / Türkiye
Tel: (90) (216) 394 50 55 Fax: (90) (216) 394 50 58
e-mail: [email protected]m
www.aybey.com