Azden 1201XT User manual

High Peformance True Diversity
Broadcast Wireless Microphones
1201 series
Whether you use a Panasonic® or Ikegami® camera with "slot-in" receiver
capabilities, or use the Anton-Bauer® Gold Mount®, or a V-Mount battery,
there's an AZDEN 1201 designed specifically for your use.
1201URX/Si
1201URX/AB
1201URX/VM
1201BT
1201XT
System Features
● New DTV-compatible (188) frequencies covering 4 UHF TV bands
●True diversity system with 2 complete front-ends
●Proprietary Diversity Logic Control circuitry for reduced drop-outs
●Dielectric filters throughout, for improved image rejection and superior
diversity isolation
●High 5th-order filters for improved S/N ratio
●Multi-function LCD shows channel, frequency, battery info, AF level,
and diversity operation

AZDEN corporation
200 Valley Road, Suite 101, Mt. Arlington, NJ 07856, [phone], FAX [phone]
e-mail: [e-mail], web site: www.azdencorp.com
Broadcast UHF Wireless System
1201 series
Specifications*
Overall System 1201URX/VM IDX “V” Mount
Operating Range 200-300 feet Frequency Response 50 Hz – 15 kHz
Operating Frequency UHF band, 638.125 to 661.875 MHz RF Squelch level -95 dBm
Number of Channels 188 User-selectable
Adjacent Chan. Selectivity ?70dB
Receiving System True Diversity
Intermodulation ?65dB
Modulation Mode FM Noise Reduction Expander (THAT)
Oscillator Phase Lock Loop synthesizer Audio Output (balanced) +4 dBm @ ± 40 kHz Deviation (Line)
Display LCD -40 dBm @ ± 40 kHz Deviation (Mic)
Operating Temp. Range -10° C to +50° C (-50° F to -122° F) Output Impedance 600 Ω
S/N Ratio 62 dB (± 5 kHz) “A” Weighted
Pow er Requirement 12VDC (11.0 – 15.0 VDC)
1201URX/Si Slot-In Receiver Dimensions 82W x 150H x 600D mm
Frequency Response 50 Hz – 15 kHz 3.23W x 5.9H x 2.36D inches
RF Squelch Level -95 dBm
Weight 750 g (26.45 oz) w /antennas
Adjacent Chan. Selectivity ?70 dB
Intermodulation ?65 dB
Noise Reduction Expander (THAT) 1201BT Belt-pack Transmitter
Audio Output (unbalanced) -20 dBm – 1 kHz @ ± 40 kHz Deviation RF Pow er 25 mW
Output Impedance 300 Ω Antenna ¼ w avelength (internal)
S/N Ratio 62 dB (± 5 kHz) “A” Weighted Frequency Response 50 Hz – 15 kHz
Pow er Requirement 12 VDC (10.5 – 17.0 VDC) from camera Reference Deviation ± 5 kHz (-60 dBm – 1 kHz input, Mic)
Dimensions (Insertion) 68W x 84H x 18D mm ± 40 kHz max deviation
2.68W x 3.3H x 0.7D inches Noise Reduction Compander (THAT)
Dimensions (Display) 80W x 22H x 35D mm (3.25 x 0.87 x 1.38 in.) Pow er Requirement 2 “AA” Batteries (Alkaline)
Weight 250 g (8.8 oz) w /antennas 6-8 hour runtime
Dimensions 63W x 98H x 28.5D mm
2.48W x 3.86W x 1.12D inches
1201URX/AB Anton Bauer® Mount Receiver
Weight 180 g (6.35 oz) w /batteries
Frequency Response 50 Hz – 15 kHz
RF Squelch Level -95 dBm 1201XT Plug-In Transmitter 1201XT Plug-In Transmitter
Adjacent Chan. Selectivity ?70 dB RF Pow er 25 mW RF Pow er 25 mW
Intermodulation ?65 dB Antenna ¼ w avelength (internal) Antenna ¼ w avelength (internal)
Noise Reduction Expander (THAT) Frequency Response 50 Hz – 15 kHz
Audio Output (balanced) +4 dBm @ ± 40 kHz Deviation (Line) Reference Deviation ± 5 kHz (-60 dBm – 1 kHz input, Mic)
-40 dBm @ ± 40 kHz Deviation (Mic) ± 40 kHz Maximum
Output Impedance 600 Ω Noise Reduction Compander (THAT)
S/N Ratio 62 dB (± 5 kHz) “A” Weighted Pow er requirement 2 “AA” Bateries (alkaline)
Pow er Requirement 12 VDC (11.0 – 15.0 VDC) 6-8 hour runtime
Dimensions 93W x 119H x 49D mm Dimensions 40W x 114H x 40D mm
3.66W x 4.66H x 1.93 D inches 1.57W x 4.49H x 1.57D inches
Weight 450 g (15.87 oz) w /antennas Weight 180 g (6.35 oz) w /batteries
* Due to constant improvements, specifications are subject to change w ithout notice.
Available Systems;
1201ABT 1201UPR/AB w/1201BT & EX503H 1201ABS 1201UPR/AB w/1201BT & ECM-44H
1201ABX 1201UPR/AB w/1201XT 1201VMT 1201UPR/VM w/1201BT & EX-503H
1201VMS 1201UPR/VM w/201BT & ECM-44H 1201VMX 1201UPR/VM w/1201XT
1201SiT 1201UPR/Si w/1201BT & EX-503H 1201SiS 1201UPR/Si w/1201BT & ECM-44H
1201SiX 1201UPR/Si w/1201XT