AZZA Noir User manual

RGB Lighting Switching
Fan Installation
Cooling System Installation
Remove the Front Panel Instructions
3.5"HDD/ 2.5" SSD Installation
7.
8.

Model Name: NOIR
Model Number
Type: Micro ATX Mid Tower
Color: Black(exterior)/black(interior)
Side Panel Window: Leside panel: tempered glass with rubber mounts
Max CPU Cooler Height: UP to 165mm
Max GPU Length Up to 300mm long video card
Motherboard Compability: Micro ATX
External 5.25" Drive Bays: 0
Internal 2.5" Drive Bays: Up to 6
Internal 3.5" Drive Bays: Up to 2
Expansion Slots: 4
Top Ports:
Case Dimension (HxWxD) 397x215x404mm/15.6x8.5x16 inches
Weight: 4.3kg /9.5lbs
Outer Appearance: High-quality tempered glass side window allows for clear visuals to inner components
Addressable RGB Light Eects:
All ARGB light sync. devices connected to the 5pin ARGB control hub, allowing the LED


Available Fan Ports: 2x120mm fan ports on the top
1x120mm fan port in the rear (1 x 120mm ARGB fan included)
Water Cooling: Supports radiators up to 240mm in the front
Dust Filters:
Power Supply Support:
Removable (magnec) dustproof net on the top, iron net on boom of chassis.

Expansion
Features
Model
Specifications
Physical Specifications
Power Supply Support: 
CSAZ-130M
Power buon, LED buon, HD Audio, USB 3.0 x2, USB2.0 x1
3x120mm fan ports in the front (1 x 120mm ARGB fan included)

1
7
2
3
4
5
6
1
2
3
4
5
6
7
8
Right side panel
Front panel
Left side tempered glass panel
Screws for side glass panel
Removable (magnetic) dustproof net
3.5"HDD brackets X2
Case feet
8
2.5"SSD brackets X2

Power button
LED changes button
Power Indicator
Hard disk Indicator
Mic
Audio
USB2.0
USB3.0(Blue)
Control Panel Functions

2.5"SSD brackets X2
E
F
300300
300
3.5"HDD/ 2.5" SSD Installation

240mm

Move HDD cage to install the fan
on the front panel
Move HDD cage to install the Radiator
and fan on the front panel

Remove the Front Panel Instructions

▪Press the LED button to
cycle through different
RGB lighting modes.

Fan Installation
※Press the LED button to cycle through different RGB 15 lighting modes,
controlled by the
LED button.
LED Button control Motherboard Sync.
software control
LED
3 Secs
LED
1 Secs
SATA
ARGB RESET
DC FAN