Baby trend Tj50c29e User manual

TJ50C29E

Instruction Manual

Manual de Instrucciones

Manuel d’instructions

TJ50C29E _3L_080718_2

TJ50D

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND®

FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the rst 180 days of pur-

chase. Any product which has been subjected to misuse, abuse, abnormal use, excessive

wear and tear, improper assembly, negligence, environmental exposure, alteration or ac-

cident, or has had its serial number altered or removed invalidates all claims against the

manufacturer. Any damage to property during installation is the sole responsibility of the end

user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday

through Friday between 8:00am and 4:30pm (PST). Return Authorizations are required prior

to returning product(s) to Baby Trend®. Warranty only valid in North America.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND®

PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend® cubre defectos de fábrica dentro de los primeros 180 días de

la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,

desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o ac-

cidente, o que ha tenido su número de serie alterado o removido anula todos los reclamos

contra el fabricante. Cualquier daño a la propiedad durante la instalación es de la exclusiva

responsabilidad del usuario nal. El Departamento de Servicio al Cliente puede ser con-

tactado a 1 (800) 328-7363 Lunes a viernes entre 8:00am y 4:30pm (PST).Un numero de

autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend®. Garantia

válida sólo en América del Norte.

GARANTIE

NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY

TREND®POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION.

La garantie Baby Trend® couvre les vices de fabrication dans les 180 jours suivant l'achat du

produit. Tout produit qui a été soumis à un usage abusif, une utilisation anormale, une usure

excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la

modication ou un accident, ou a eu son numéro de série modié ou supprimé annule toutes

les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de

la seule responsabilité de l'utilisateur nal. Le service client peut être contacté au 1 (800)

328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant

de retourner le produit à Baby Trend®. Garantie valable uniquement en Amérique du Nord.

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto.

CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

Lisez toutes les instructions du manuel AVANT l’assemblage

ou L’UTILISATION de ce produit. CONSERVEZ CES

INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

www.babytrend.com

1-800-328-7363

(8:00am ~ 4:30pm PST)

www.babytrend.com

Baby Trend, Inc.

1607 S. Campus Ave.,

Ontario, CA 91761

www.babytrend.com

Stroller Seat

* Front Wheel

Bumper Bar

* Rear Wheels

Canopy

Check that you have all the parts for this model

before assembling the stroller.

Cup Holder Pocket

Axel Nuts ** Retainer plates

Wheel styles may vary

Type may vary

*** Please refer to the manual located under the car seat for base type and instructions.

*** Infant Car Seat *** Base

Child’s tray

PARTS WARNING

WARNING: Please follow all of these

instructions to ensure the safety of your child. Keep

these instructions for future reference.

WARNING: Failure to follow these instructions

could result in serious injury or death. Avoid serious

injury from falling or sliding out, always use the safety

harness and insure that the children are properly

positioned according to these instructions.

WARNING: Never leave children unattended.

WARNING: Care must be taken when folding and

unfolding the stroller to prevent nger entrapment.

WARNING: Wheel can detach and cause tip over.

Pull on the wheel to assure it is securely attached.

• CAUTION: This single stroller is designed for one child only. Use with more than one child

may cause the unbalance condition which can injure/ harm your child.

• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance

of the stroller and cause a hazardous, unstable condition.

• The maximum weight that can be carried in the storage basket is 5 pounds (2.27kg).

Excessive weight may cause a hazardous unstable condition to exist.

• Be certain the stroller is completely opened and locked in place before allowing a child

near the stroller.

• Use of the stroller with a total weight more than 50lbs (22.67 kg) will cause excessive

wear and stress on the stroller and may cause a hazardous unstable condition to exist.

• NEVER use the stroller on stairways or escalators.

• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.

• NEVER allow your stroller to be used as a toy.

• To clean use only mild household soap or detergent and warm water on a sponge

or clean cloth.

• Check your stroller for loose screws, worn parts, torn material or stitching on a regular

basis. Replace or repair parts as needed.

• Discontinue use of stroller should it malfunction or become damaged. Please contact our

customer service department to arrange for repair or obtain replacement parts.

44333 4

Remove stroller from box. The front wheel

and rear wheels MUST be installed prior

to use.

FRONT WHEELS

To attach the front wheel, unfold stroller as

described in the section following:

1) • Unlock the release lever (Fig. 1a) and

unfold stroller frame by pulling upward

on the stroller handle until the frame

locks (Fig. 1b).

• Lean the stroller backwards so that the

front wheel posts are pointing upward.

2) • Slide the front wheel onto the front forks

(Fig. 2).

3) • Slide the retainer plates onto the front

wheel. Be sure that the raised lip is

pointing toward the fork and insert it

into the slot on the fork. The tab on the

retainer plate must be lined up with the

slot before tightening the wheel (Fig. 3).

4) • With the wheel in position, tighten the

axel nuts and tighten with standard

crescent, box, or open end wrench. You

should feel signicant resistance and

the wheel should be held tightly in place

(Fig. 4).

REAR WHEELS

5) • Lean the stroller forward to rest on the

front wheel.

•

Press the rear wheel posts into the rear

frame hub until it clicks into place (Fig. 5).

NOTE: Pull on the rear wheel to ensure

that it is securely attached to the stroller.

TIRES

6) • Tires are shipped un-inated. The tires

should be inated on a regular basis to

the P.S.I. specied on each tire. Always

use a bicycle style hand air pump to

inate the tires (Fig. 6). *Pump not

included.

ASSEMBLY ASSEMBLY

IMPORTANT! To ensure safe operation of your

stroller, please follow these instructions carefully. Please keep

these instructions for future reference.

IMPORTANT! Before assembly and each use,

inspect this product for damaged hardware, loose joints,

missing parts or sharp edges. NEVER use if any parts are

missing or broken.

IMPORTANT! Adult assembly is required.

Fig. 1a

Fig. 1b

Fig. 2

Retainer Plate

Axel Nut Axel and Hub

Front Fork

Slot

Fig. 4

Fig. 5

Fig. 6

5 6

MULTI-POSITION HANDLE

7) •

To adjust the handle, press the release

buttons to move the handle up or down to

a comfortable position for the user (Fig. 7).

NOTE: Make sure the handle clicks into

place before using.

BUMPER BAR

WARNING: Do not

use bumper bar to carry

seat with child inside. The

bumper bar is not a carrying

handle.

8) • Attach the bumper bar by lining up

anchors with the slots on the seat. Push

until it clicks into place (Fig. 8a).

NOTE: The bumper bar must be securely

attached before using this product.

• To detach bumper bar, press the release

button on the bottom of the bar and pull

bar out of the anchor. Swing the bar

upwards to access the seat (Fig. 8b).

Fig. 9a

Fig. 9b

CHILD TRAY

WARNING: Do not

place hot liquids or more than

1 pounds in the child’s tray.

Serious burns or unstable

conditions could result.

WARNING: Care

must be taken when attaching

and removing the child’s tray

to prevent nger entrapment.

9) • To attach child’s tray: the child’s tray has

three positions, align the child’s tray to one

of the positions and push down onto the

bumper bar (Fig. 9a). Push until rmly in

place.

NOTE: Make sure the child’s tray locks in

one of the three positions before using.

• To remove child’s tray: push the child’s

tray tab outward and pull up (Fig. 9b).

ASSEMBLY ASSEMBLY

Fig. 7

Fig. 8a

Fig. 8b

Release Button

88777 8

Open Zipper

Storage Basket

Lift Cover

Fig. 11

Fig. 10

CUP HOLDER AND POCKET

WARNING: To

avoid burns, never put

hot liquids in cup holder

/ pocket. Avoid possible

tipping, do not place

more than 1 lb. (0.45kg)

in cup holder. Do not put

hot liquids in this pocket.

A potential spill could

burn the child. Maximum

weight for this pocket is

1 lb.

10) • To attach cup holder: slide the clip

on the cupholder over Cup Holder

tabs on the Handle Bar. Push untill

rmly in place (Fig. 10).

STORAGE BASKET

WARNING: The

maximum weight that can

be carried in the storage

basket is 5 lbs (2.27kg).

11) •

Use the zipper to open and close the

storage cover to access the storage

basket (Fig. 11).

ATTATCHING THE SEAT

WARNING:

Never jog or run with your

newborn in the carriage position.

Use for strolling only.

12)

• Make sure the seat fabric is properly

attached to the seat support bar. If the seat

fabric is unzipped, wrap the seat fabric

around the seat support bar (Fig. 12a) and

zip the fabric closed.

• Attach the seat by lining up the seat anchors

on the side of the seat with the anchors on

the stroller frame and push them together

until they click securely (Fig. 12b). The seat

can face in either direction, frontward or

backwards.

TO ADJUST SEAT

13)

• The seat can be adjusted into upright,

reclined, and carriage position. Pull the

recline button on the rear of the seat and

rotate the seat into the desired position

(Fig. 13a).

• Upright and Reclined Position: Buckle the

footrest and headrest straps on the rear of

the seat. Pull the excess straps to tighten the

seat (Fig. 13b).

• Carriage Position: Make sure both footrest

and headrest straps are loosened and

extend the seat surround fully (Fig. 13b).

ASSEMBLY ASSEMBLY

Fig. 12a

Fig. 12b

Fig. 13b

Fig. 13a

910

TO REMOVE SEAT

• To take off the seat, push both center

buttons on each side of the seat and lift

seat upwards (Fig. 13c).

DO NOT remove with child in the seat.

REMOVABLE CANOPY

14) • To attach the removable canopy:

Snap the canopy clips on the inside of

the toddler seat tubes (Fig. 14a).

• To open the canopy: push forward

on the front edge of the canopy while

holding the rear of canopy in place

(Fig. 14b).

• To fold the canopy: pull backwards on

the front edge (Fig. 14b).

BRAKES

WARNING:

Always

set brakes when the stroller

is not being pushed so

that the stroller will not roll

away. NEVER leave stroller

unattended on a hill or

incline as the stroller may

slide down the hill.

Fig. 14a

Fig. 15

15) • To engage brakes, apply downward

pressure to the brake levers located on the

rear axle. The stroller may require forward

or rearward movement in order to engage

the brake. Check that the stroller will not

move once the brakes are properly applied.

To release, gently lift up on the brake levers

(Fig. 15).

FRONT WHEEL LOCK

WARNING:

Always

lock the front swivel wheel

in STRAIGHT position before

placing or removing your

children from the stroller and

when walking fast or jogging.

FALL HAZARD:

Prevent tipping over, before

running, jogging or walking

fast, LOCK the front wheel

from swiveling.

16) • The front wheel is equipped with a swivel

locking device and engage in front or back

(Fig. 16a).

• Push the button on the wheel upward to

engage the locks and push downward to

disengage the locking device (Fig. 16b).

Fig. 16a

Fig. 16b

Fig. 13c

ASSEMBLY ASSEMBLY

Fig. 14b

Lock

Unlock

11 12

TO SECURE THE CHILD

Fig. 17a

WARNING: Avoid

serious injury from falling or

sliding out. Always use the

safety harness.

STRANGULATION

HAZARD: Child can

strangle in loose straps. Never

leave child in seat when straps

are loose or undone.

Type 1 and 2

17) • The shoulder straps of the 5-point harness

have 3 attachment positions. Select the

position that places the shoulder strap level

with, or below the top of the child’s shoulder

(Fig. 17a). To adjust harness height unhook

the shoulder strap from the crotch buckle.

Feed the shoulder strap through the

harness spread slots. You can access these

slots from the rear of the seat underneath

the fabric. Feed shoulder strap through

appropriate slot and reattach shoulder strap

to crotch buckle.

• Carefully place the child in the stroller seat

and bring the safety harness around the

child’s waist and over the shoulders. Place

the crotch strap between the child’s legs.

Insert the male end of each shoulder/waist

belt into the buckle on the crotch strap.

Tighten the harness to be snug around the

child’s waist and over the child’s shoulders

(Fig. 17b).

Fig. 17b

TO RELEASE THE CHILD

Type 1

18) • To release, push Button on Center Clasp, the

two Harness Buckles will pop

free (Fig. 18).

Type 2

19) • To release, apply pressure to both sides of

each male clip until the clip is released (Fig.

19).

JOGGING WITH YOUR STROLLER

WARNING: Never jog

or run with your newborn in

the car seat position. Use for

strolling only.

STRANGULATION

HAZARD! Children have

strangled when straps have

wrapped around their neck.

When not in use hook the tether

strap onto the stroller handle.

Keep this stroller tether strap

out of the reach of children.

SAFETYSAFETY

Adjust for a snug t

Type 1 Buckle

Shoulder Strap

Squeeze

Waist Strap

Crotch Strap Adjust for a snug t

Type 2 Buckle

Fig. 18

Center Clasp

Type 1

Fig. 19

Type 2

1413

When you are jogging with your child,

use the following safety features:

20) •Seat MUST be in forward and upright

position (Fig. 20a).

• Lock the front swivel wheel in the

straight position (Step 16).

• THE TETHER STRAP: This strap is

intended to maintain control of the stroller

in case of a fall while running. To use the

tether strap, remove if from the handle

of the stroller. Attach it to your wrist as

shown in (Fig. 20b).

• The safety strap must remain connected

to the rear lower frame cross member

at all times. This location is intended

to prevent the stroller being tipped

backward in the event that you do fall to

the ground. The safety strap includes a

hook and loop attachment for storage,

on the left side of the stroller, when not

in use (Fig. 20c).

TO FOLD STROLLER

WARNING: Care

must be taken when folding

and unfolding the stroller to

prevent nger entrapment.

CAUTION: Do not

allow children near stroller

while folding.

21) • Pull the stroller backward several inches

to adjust the front wheels to the front.

• Fold the stroller by pulling both release

triggers (Fig. 21a) and push handle

toward the oor. Make sure the front

wheels lie at, then secure the stroller

in the folded position by locking the fold

latch, located on the right side of the

stroller, over the rivet (Fig. 21b).

TO UNFOLD STROLLER

CAUTION: Do not

allow children near stroller

while unfolding.

22) • Unlock the release lever (Fig. 22a) and

unfold stroller frame by pulling upward

on the stroller handle until the frame

locks (Fig. 22b).

SAFETY FOLD / UNFOLD

Fig. 21b

Fig. 22a

Fig. 22b

Fig. 20a

Fig. 20c

Fig. 20b

Fig. 21a

1615

INFANT CAR SEAT

WARNING: Never

jog or run with your

newborn in the car seat

position. Use for strolling

only.

WARNING: Avoid

serious injury from falling or

sliding out, always use the

Infant Car Seat harness.

23) •

Attach the car seat by lining up the seat

anchors on the side of the car seat

with the anchors on the stroller frame

and push them together until they lock

securely (Fig. 23).

TO REMOVE INFANT

CAR SEAT

24) • To take off the infant car seat, push both

center buttons on each side of the seat

and lift seat upwards (Fig. 24).

RIDING POSITIONS

Stroller frame may vary from the positioning diagram below.

Face in either direction,

frontwards or backwards.

CARRIAGE MODE

FORWARD FACING

CAR SEAT MODE

Face in either direction,

frontwards or backwards.

REAR FACING

WARNING:

Bumper bar is not designed

to support a car seat, stroller

may become unstable.

INFANT CAR SEAT INFORMATION

Fig. 23

Fig. 24

UNIVERSAL CAR SEAT ADAPTER

25) • Compatible with the Universal Car Seat

Adapter (Sold Seperately).

Universal Infant Car Seat Carrier

Accepts all Baby Trend®and most

major brands of Infant Car Seats.

www.babytrend.com

Compatible with most Baby Trend®

modular strollers and joggers (MUV®,

Snap Tech, Snap Gear® and Snap

Fit™) and transforms them into infant

car seat carriers.

Fig. 26

Fig. 27

CARE AND MAINTENANCE

TESTING FOR PROPER WHEEL

INSTALLATION

WARNING:ALWAYS

check the double nut

locking system before each

use to ensure that the front

wheel is securely fastened

to the frame.

FALL HAZARD

Wheel can detach and cause

tip over. Pull on the wheel

to assure it is securely

attached.

26) • Lift the front of the stroller off the ground,

and pull down on the wheel to make

sure it is secure (Fig. 26).

NOTE: The wheel must not come off.

If you experience front wheel wobble

that is beyond what is normal for use

while walking or jogging you may have

to adjust the front wheel housing nut.

27) • Remove footrest to access nut. You

can use a standard crescent wrench to

tighten the nut (Fig. 27).

DO NOT OVER TIGHTEN this can

cause damage to the wheel housing.

ASSEMBLY MAINTENANCE

Table of contents

Languages:

Other Baby Trend Stroller manuals

Baby Trend

Baby Trend SNAP TECH User manual

Baby Trend

Baby Trend muv 180 Sit N' Stand SS68A User manual

Baby Trend

Baby Trend Trendsport Lite 1510 User manual

Baby Trend

Baby Trend TJ75 H Series User manual

Baby Trend

Baby Trend MUV Snap-N-Go Pro User manual

Baby Trend

Baby Trend TS23B User manual

Baby Trend

Baby Trend Expedition CW01 Series User manual

Baby Trend

Baby Trend Expedition DLX Jogger Travel System JC75... User manual

Baby Trend

Baby Trend Sit N Stand Double User manual

Baby Trend

Baby Trend MUV Expedition WG01 M Series User manual

Baby Trend

Baby Trend ST04 User manual

Baby Trend

Baby Trend Tour WG01D22B User manual

Baby Trend

Baby Trend TJ79 User manual

Baby Trend

Baby Trend ST43 User manual

Baby Trend

Baby Trend Snap-N-Go SG33 User manual

Baby Trend

Baby Trend JG95C User manual

Baby Trend

Baby Trend TS44 A Series User manual

Baby Trend

Baby Trend NexGen TS23 N Series User manual

Baby Trend

Baby Trend Velocity Lite JG58 User manual

Baby Trend

Baby Trend Navigator DX60 User manual

Baby Trend

Baby Trend Sit-N-Stand Elite SS76 B Series User manual

Baby Trend

Baby Trend TS89A User manual

Baby Trend

Baby Trend Skyview TS89C04B User manual

Baby Trend

Baby Trend DJ99 User manual

Popular Stroller manuals by other brands

UPPAbaby

UPPAbaby Minu manual

Summer

Summer Ume Lite instruction manual

CASUALPLAY

CASUALPLAY Optim instructions

Cube

Cube JANE nurce instructions

Hauck

Hauck Priya Trioset Instructions for use

Dreamer Design

Dreamer Design Rebound GST instruction manual

Britax

Britax STEELCRAFT AGILE manual

Graco

Graco 7427 owner's manual

OBaby

OBaby Aura instruction manual

Tutek

Tutek Tirso instruction manual

Babify

Babify Dual Plus manual

Graco

Graco Stroller user guide

Chicco

Chicco CORTINA TOGETHER TWO-PASSENGER STROLLER owner's manual

Otto Bock

Otto Bock Kimba neo Instructions for use

Milly Mally

Milly Mally ROYAL Operational manual

Hauck

Hauck DUETT 3 PRAM Instructions for use

BabyGo

BabyGo STYLE Assembly instructions

Chicco

Chicco SIMPLICITY null

Baby Trend TJ50C29E User manual

Popular Stroller manuals by other brands