BaByliss PRO ItaliaBRAVA BAB5620U User manual

BAB5620U
BAB5620BU

ItaliaBrava Dryer
The lightweight ItaliaBRAVA, powered by the revolutionary MaxLife™
PRO brushless engine designed in collaboration with Ferrari, guarantees
advanced professional performance with stronger air pressure to give
faster airow, quieter operation and up to 10,000 hours of high-speed
drying.
FEATURES
• Ferrari designed brushless motor lasts up to 10x longer
• 2400W and a lock-in turbo boost for stronger air pressure and 15%
faster airow
• 20% lighter for comfortable balance
• Low vibration for quieter operation
• Nano Titanium & ionic technology
• 6 speed and temperature settings
• Cold shot button
• 2 ultra-slim nozzles
• Removable noise reducing rear lter
• 2.8m tangle-free power cord with hanging loop
SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction booklet. Please retain for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over product or package
may be dangerous. To avoid danger of suffocation, keep

this wrapper away from babies and children. This bag is
not a toy.
WARNING! THIS APPLIANCE GETS HOT!
• ALWAYS keep out of reach of children (during and after
use and whilst cooling).
• This appliance should not be used, cleaned or
maintained by children.
• Always take extra care if used on children or near
children.
• Do not use on very young children.
IMPORTANT SAFETY
• UK Only: This appliance must not be used in the
bathroom. If using the appliance in a bathroom,
unplug after use as the proximity of water can
be dangerous even if the appliance is switched
off. For additional protection the installation of
a residual current device (RCD) with a rated residual
operating current not exceeding 30mA is advisable in
the electrical circuit supplying the bathroom. Ask your
installer for advice.
WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.
• Do not use this appliance in the bathroom.
• Do not immerse the appliance in water or other liquids.
• Never look directly into the barrel of the hairdryer when
it is switched on.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the
appliance has been dropped. In the event of damage,

discontinue use immediately and contact the Conair
Customer Care Line (refer to ‘UK After Sales Service’
section).
• Do not use the appliance if the lead is damaged. In the
event of lead damage, discontinue use immediately
and contact the Conair Customer Care Line (refer to
‘UK After Sales Service’ section).
• Do not leave the appliance unattended when switched
on or plugged in.
• This unit is equipped with a safety thermostat. In
the event of overheating the appliance will either
stop automatically or run hot and cold intermittently.
Should this happen, switch the dryer to the ‘0’ position,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear lter is clear of hair and other debris.
Plug in and switch on. If the appliance continues to
overheat discontinue use immediately, switch off and
unplug, and contact the Conair Customer Care Line
(refer to ‘UK After Sales Service’ section for further
information).
• Take care that the air vents do not become blocked
when in use. Make sure the rear lter is clear of hair
and other debris before use.
• Do not place the appliance on any heat sensitive
surface whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular
the ears, eyes, face and neck.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or

whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Allow appliance to cool before storing away.
• After use, do not coil the lead around the appliance as
this may cause damage to the lead. Instead, coil the
lead loosely by the side of the appliance.
• This appliance complies with the requirements of
Directives 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Electrical Safety of
Domestic Appliances).
OPERATING INSTRUCTIONS
MAXLIFE™ PRO TECHNOLOGY
The ItaliaBrava™ dryer is equipped with a Ferrari designed engine,
featuring MaxLife™ PRO brushless technology. Conventional styling
tool motors require carbon brushes to operate. Friction eventually
wears them down and the motor fails. MaxLife™ PRO technology
eliminates the brushes, producing a lighter weight motor that lasts
longer – up to 10,000 hours. Rare-earth magnets create an efcient
and long-lasting power source within the engine. Sealed ball bearings
reduce vibration and help extend the life of the engine.
The ItaliaBrava™ also features a lock-in turbo button, located at the
back of the handle. This provides up to a 10% increase in airow for
maximum drying power, and should be used for targeted drying/styling.
Simply press the button once to engage the turbo feature for drying
hair that is very wet, or for straightening very curly, resistant sections.
Press the button again to return to normal high-speed setting.

DRYING BASICS
1. Shampoo and condition hair. Rinse thoroughly. Towel-blot hair to
remove excess moisture. Section hair. Using the dryer along with a
styling brush, direct hot air through a section of hair at a time. Move
dryer steadily across each section so that the hot air passes through
hair. Direct airow at hair, not scalp.
2. Keep dryer’s air intake vents unobstructed and free from hair while
drying.
3. To avoid over-drying and possible damage to hair or skin, do not
concentrate heat on one section for any length of time. Keep dryer
moving as you style.
4. When using the dryer to create curls and waves, dry hair almost
completely on a warmer temperature setting, then nish styling with
cooler air.
5. This dryer includes concentrator attachments. Use the attachments
when you need drying power in a small area (such as a curl or a
wave), or when you want to relax curly hair.
WARNING
This professional dryer is equipped with a cold air setting, as well as a
cold shot button. Do NOT use with the air inlet against hair, or damage
will be caused to internal parts.
Never block the air openings of the appliance. Keep the lter intake
free of buildup from lint, hair and other debris by cleaning regularly.
Allowing the lter to become blocked will decrease performance,
shorten the life of the dryer, and risk voiding the warranty.

NEGATIVE ION GENERATOR
The ItaliaBrava™ dryer has a central negative ion generator that
generates an exceptional volume of millions of ions per cm3. Hair is
naturally positively charged; this positive charge is increased during
drying and generates static electricity, which causes the scales of the
hair to move away from each other. The surface of hair thus becomes
rough and takes on a lifeless appearance.
The negative ions generated by this hair dryer will neutralize the positive
charge and, in this way, remove any static electricity in the hair. Hair is
shiny and easy to style. It has been proven that ionic technology acts
as a catalyst for hair products.
LIGHTWEIGHT AND ERGONOMIC
The ItaliaBrava™ dryer has an ergonomic handle that makes it very
comfortable to use. Its light weight and ideal balance make it perfect
for the salon.
CONCENTRATOR NOZZLES
The ItaliaBrava™ dryer comes with 2 different concentrator nozzles:
- one straight, narrow 60mm nozzle that is perfect for straightening
because it lets you achieve the required tension on the hair.
- one beveled, large 70mm nozzle for smoother blow-drying; it is
slightly diagonal in shape, hugging the shape of the brush perfectly.
CLEANING AND MAINTENANCE
The dryer must be kept clean for proper operating performance. When
cleaning is needed, unplug the cord, allow to cool and clean dust and
lint from air intake openings with a small brush or the brush attachment
of a vacuum cleaner. The outer surface of the dryer should be wiped
clean with a cloth only.
Blocked or clogged air intake vents will cause the dryer to overheat.
If overheating occurs, an automatic safety device will shut the dryer
or the heat off to prevent damage or personal injury. If the unit or the

heat cycles off, turn the dryer off, unplug the cord, and allow the dryer
to cool for 10 to 15 minutes before restarting. Make sure air vents are
clean, by following below steps.
1. Remove intake lter from back of dryer by twisting counterclockwise.
2. Reach through opening, and press the mesh screen to release it
from the lter (Fig. 1).
3. Visually inspect the lter to make sure no hair is caught
(Fig. 2). Rinse the mesh screen ONLY under running water to clear
any debris. Repeat as needed, or use a stiff bristle brush for any
difcult build-up.
4. Make sure the mesh screen is free from any debris and completely
dry. Place screen into bottom part of removable intake lter (Fig. 3).
5. Press with your nger around the edge of the screen to lock mesh
screen in place (Fig. 4).

UK GUARANTEE
This BaByliss PRO appliance is guaranteed for salon use for 2 years.
This guarantee covers defects under normal use from date of purchase
and ceases to be valid in the event of alteration or repair by unauthorised
persons. If the appliance does not perform satisfactorily due to defects
in materials or manufacture, it will be repaired or replaced through
Conair UK After Sales Service. The Conair Group Ltd reserves the right
to amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.
UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or email
your enquiry to [e-mail].
If you should need to return your appliance to us please send it to the
following address:
Customer Care Centre
Conair Logistics
Unit 4
Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your name and address, together with a copy of proof
of purchase and details of fault.

SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be
handed to an appropriate collection point for the recycling of Electrical
and Electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your
local council ofce or your household waste disposal service.
UK WIRING INSTRUCTIONS
UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
• BLUE = NEUTRAL
• BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour marking identifying the terminals on your
plug, proceed as follows:
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L
• Neither the BLUE nor BROWN wires should be connected to the
terminal which is marked with the letter E or the symbol

This appliance is supplied tted with a BS1363 mains plug and a
BS1362 13A fuse. If this plug is removed from the appliance please
ensure it is disposed of safely as a disconnected plug is dangerous if
reconnected to the mains. If any other type of plug is used, a 13A fuse
must be tted.