BaByliss PRO NANO TITANIUM BNTHB250A User manual

IB-22/001
For your safety and continued enjoyment of this product, always read the instruction book carefully before use.
©2022 BabylissPro
Distributed by:
Dateline Imports P/L
Professional Products Division
Banksmeadow, NSW 2019
Australia
Ph: 61 2 9666 3611
www.babylisspro.com.au
Dateline Imports NZ Ltd
66 Apollo Drive
Albany, Auckland
NZ 0632
Ph: 64 9 415 5415
www.babylisspro.co.nz
Model BNTHB250A (64mm)
OVAL IONIC HOT AIR BRUSH

toward the ends, and as you reach
the end of the section, start to rotate
the brush away from the head.
5. As you do this, pull the brush
downward. Tension created through
the section of hair will help to smooth
hair faster.
IMPORTANT! It may take several
attempts to perfect this technique.
6. For added root lift, hold the brush in
place at the roots for a few seconds.
7. For even more volume, rotate the
brush, winding the entire section of
hair around the barrel. Then leave the
brush in the hair for a few seconds.
Use cool style setting to set style.
8. To release the section, unwind
the hair from the brush.
9. Repeat as necessary.
10. After use, switch off and unplug the
appliance.
11. Allow to cool before storing away.
Helpful Hints and Tips
•To define layers and give shape
to styles, follow step 4 and repeat
through all sections.
•To get root volume and body through
the top section of hair, follow steps 3
to 6, but using an upward motion.
•You can create flips or tuck hair under.
Also perfect for shaping bangs.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
• When using electrical appliances,
especially when children are present,
basic safety instructions should
always be followed.
• Polythene bags over product or
package may be dangerous. To
avoid danger of suffocation, keep
this wrapper away from babies and
children. This bag is not a toy.
DANGER
• Do not use this appliance
in or near bathtubs,
showers, basins or other
vessels containing water.
• Do not immerse the appliance in
water or other liquids.
• When the hot air brush is used in
a bathroom, unplug after use since
the proximity of water presents a
hazard even when the hot air brush
is switched off.
• For additional protection, the
installation of a residual current
device (RCD) with a rated operating
current not exceeding 30mA is
advisable in the electrical current
circuit supplying the bathroom. Ask
your installer for advice.
• Do not reach for an appliance that has
fallen into water. Unplug immediately.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to
ensure they do not play with the
appliance.
CAUTION: In order to avoid a hazard
due to inadvertent resetting of the
thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
OVAL IONIC
HOT AIR BRUSH (64MM)
INSTRUCTIONS FOR USE
Use a hairdryer first to dry hair and
remove the excess moisture.
Once the hair is 80% dry, you can
start to create your style using the
BaBylissPRO® Oval Ionic Hot Air Brush.
SUPER STYLING GUIDE
Always treat hair right with superior
quality shampoos, conditioners, and
finishing products.
The BaBylissPRO Oval Ionic Hot Air
Brush is an innovative, revolutionary hot
air styler that has effectively eliminated
the need for a hair brush or a dryer.
The BaBylissPRO Oval Ionic Hot Air
Brush is perfect for adding gorgeous
volume and shine to styles. The large
barrel gives fullness and body as you
style while the combination bristles
create ultimate shine and smoothness.
FEATURES:
• 1000 watts
• High shine–true ionic conditioning
• 2.5” barrel with tangle-free combination
bristles
• 2 heat settings plus cool setting
• High-performance DC motor
• Easy-to-clean removable filter
• Professional power cord
TRUE IONIC TECHNOLOGY
AMany aspects of modern living,
including air conditioning, contact with
man-made fibers, and air pollution
contribute to a buildup of static
electricity in the hair. Even brushing
and towel-drying the hair can increase
these levels, causing the surface of the
cuticle to become rough.
Consequently, hair may have a dull
appearance. Also, high levels of static
charge cause hair to become flyaway
and difficult to style. The ion generator
produces a stream of negative ions
that act to neutralize the static charge,
smoothing the cuticle for shiny, smooth
and manageable hair, so you can
achieve your desired style easily.
Nano Titanium™ Technology
Nano titanium™ is an exceptional
conductor of heat and is stable in ultra-
high temperatures. This technology
uses microparticles of titanium that
provide the ultimate heat performance
for beautiful, healthy-looking hair.
3 SETTINGS
Low Setting: This position combines
ideal airflow and temperature setting for
shaping finer, damaged or treated hair.
High Setting: Combines ideal airflow
with higher temperature, especially
recommended for pre-drying and also
for styling thick hair.
Cool Setting: Using the cool setting at
the end sets the style for a long-lasting
effect.
Styling Tips for Maximum
Volume and Body
1. Start by sectioning the hair. Be
sure to comb through hair so it’s
detangled.
2. To turn the appliance on, select the
correct heat setting based on hair
type.
3. Position the appliance in the hair
close to the roots, and brush through
the section.
4. Move the brush through the hair
2 3

IMPORTANT!
• Always unplug the appliance when
not in use or before cleaning. Do not
leave unattended when plugged in
or switched on. Do not place on any
heat sensitive surface and always
allow to cool before storing away.
• Use this appliance only for its
intended use and as described in this
instruction booklet.
• Take care to avoid contact between
the hot surfaces of the unit and the
skin, paying particular attention to
the face, neck and hands.
• To prevent the risk of injury, never
look directly into the airflow of the
appliance when in use.
• Never drop the appliance or insert
any object into an opening
• Never use while sleeping.
• Never block the air openings of the
appliance or place on a soft surface
such as a bed or couch, where the
air openings may be blocked. Keep
the air openings free of lint and other
debris.
• Do not use outdoors or operate
where aerosol (spray) products are
being used or where oxygen is being
administered.
• Keep the cord away from heated
surfaces.
• Do not use an extension cord with
this appliance.
• Do not use if the supply cord is
damaged. In the event of damage, it
must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
• After use do not wrap the cord around
the appliance as in time this may
cause the cord to fracture. Coil cord
loosely by the side of the appliance in
storage.
• Always ensure that the voltage to
be used corresponds to the voltage
marked on the unit.
CAUTION: Take care not to direct the
airflow directly onto the skin (e.g. scalp,
neck, ears, face, etc.) as hot air from
hot air brushes can, particularly if held
too close, cause discomfort or even
burns.
STYLING ADVICE
• For best results, wash & condition
your hair prior to styling.
• Section dry or damp hair evenly &
comb through before styling. Always
ensure hair is free from knots &
tangles.
• For enhanced results, always apply a
wet styling product or argan oil to the
hair prior to styling.
• Style one section of hair at a time,
ensuring all sections are styled
evenly.
• Start with the sections of hair
underneath & work your way
gradually to the top of the hair.
• Always work from the roots to the
ends & allow the styler to glide slowly
along the section of the hair.
• Once hair is dry & styled to your
desired look, apply a finishing styling
product such as mousse or hairspray
to set & enhance the style.
LOOKING AFTER
YOUR NEW STYLING TOOL
•In order for your styling tool to retain
its optimum performance & prevent
overheating of the hot air brush,
the rear filter should be cleaned
on a regular basis. Follow these
instructions to clean the rear filter:
1.Ensure that the styling tool is
switched off, unplugged from the
power outlet & has cooled down.
2. Holding the handle of the appliance
firmly, take a soft brush & clean
away any hair or other debris that
may build up on the rear filter.
•To clean the unit, ensure it is
completely cool & unplugged from
the power outlet. Clean the unit with
a damp cloth and wipe away any
product, etc that may build up on the
unit.
•Keep the power cord away from the
hot surfaces of the product at all
times.
•Before storing away, always allow the
unit to cool down.
•To prevent cord damage, do not wrap
the cord around the unit – always
store the cord loosely next to it.
TWO YEAR WARRANTY
The warranty may only be claimed where
proof of original purchase is presented,
i.e. original purchase receipt or invoice.
We recommend attaching a copy of your
purchase receipt to this instruction book
and storing in a safe place.
To make a warranty claim you can return
the defective product back to the place it
was purchased where it will be replaced,
exchanged or repaired (see point 12 in
conditions).
Trade purchasers who have purchased from
us directly should contact us directly with
regard to warranty claims.
Please have the following details to hand:
1. Date of purchase
2. Details of where the product was
purchased
3. Product Name/Model Number
4. Confirm you have your purchase receipt
5. Detail the problem with your product
It is important to retain your proof of
purchase. We recommend attaching your
receipt to this page.
For advice with regard to the warranty claim
process please contact Customer Service:
Dateline Imports P/L
Professional Products Division
Banksmeadow, NSW 2019
Australia
Ph: 61 2 9666 3611
www.babylisspro.com.au
Dateline Imports NZ Ltd
66 Apollo Drive
Albany, Auckland
NZ 0632
Ph: 64 9 415 5415
www.babylisspro.co.nz
4 5
OPERATING FEATURES Oval barrel
Slide switch
with 3 settings
Off/Low/High/Cool
Removable lter
prevents damaging
lint buildup and
extends motor life
Tangle-free
swivel cord

WARRANTY AGAINST DEFECTS
A. AUSTRALIAN CONSUMER LAW
1. Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to
a replacement or refund for a major
failure and compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced if the goods fail to
be of acceptable quality and the failure
does not amount to a major failure.
2. The guarantees under the Australian
Consumer Law (“ACL”) are provided
in sections 51 to 59 inclusive of the
ACL (“Statutory Guarantees”) and the
remedies are provided in sections
259 to 266 inclusive of the ACL
(“StatutoryRemedies”).
In New Zealand our goods come with a
guarantee that cannot be excluded under
the Consumer Guarantee Act 1993.
B. BaByliss PRO EXTENDED WARRANTY
1. In addition and subject to the Statutory
Guarantees and Statutory Remedies, the
following express warranty (“Warranty”)
commences from the date of purchase
and continues for a period of 24 months
(“Warranty Period”) after which it expires.
Subject to the conditions in Section C
below, Dateline warrants to the original
purchaser (“Purchaser”) of the BaByliss
PRO product that is the subject of this
warranty (“Product”) that if during the
Warranty Period, the Product suffers from
any defect caused by faults in materials
or workmanship, Dateline will a) replace
the Product, or b) exchange defective part
in the Product or c) repair the Product,
as Dateline may choose in its discretion
(“Warranty”). In this Warranty “Dateline”
means Dateline Imports P/L (ABN 60 000
557 282) of Banksmeadow, NSW 2019,
Australia.
2. To honour the Warranty, Dateline must
replace, or exchange parts in, or repair,
the Product, as Dateline determines, in
accordance with paragraph B1 above,
subject always to the conditions in
Section C below.
3. If any of the conditions in Section C below
are inconsistent with any provisions
of the ACL or regulations made there
under, those provisions of the ACL or
regulations shall prevail to the extent of
the inconsistency.
C. CONDITIONS
1. The Product must be used in accordance
with manufacturer’s instructions. This
Warranty does not apply should the defect
in or failure of the Product be attributable
to misuse, abuse, accident, act of God
such as lightning, or nonobservance of
manufacturer’s instructions on the part
of the user. This Warranty does not cover
ordinary wear and tear in the Product or
its parts.
2. Dateline does not accept liability for a)
any loss or damage however suffered,
caused by or arising out of any failure to
use the Product in accordance with the
manufacturer’s instructions, and b) any
indirect, consequential or economic loss
or damage however caused.
3. This Warranty is immediately void if
– a) any serial number or appliance
plate is removed or defaced, b) the
Product has been serviced or otherwise
repaired by a person not authorized to
do so by Dateline or where non approved
replacement parts are used.
4. The Product must be connected to the
electrical voltage supply as specified in
the ratings label located on the Product.
This Warranty does not cover defects
arising from incorrect voltage supply.
5. This Warranty may only be claimed
against where proof of original purchase
is presented, for example, original receipt
or invoice.
6. Any parts of the Product that need to be
replaced, or if the whole Product needs
to be replaced, the replaced Product,
become the property of Dateline. The
Warranty on any replacement Product
or parts will expire on the same date
that the Warranty Period on the original
Product expires.
7. The benefits provided by this Warranty
are in addition to all other rights and
remedies in respect of the Product which
the Purchaser has under the ACL, and
applicable laws in New Zealand, which
rights and remedies by law may not
be excluded. All other warranties and
representations express and implied are
hereby excluded.
8. The defect must have occurred during
the Warranty Period and Purchaser bears
the onus of proving that fact, and that
the defect was not caused by any of
the causes excluded from this Warranty.
9. This Warranty does not cover Products
purchased from any person who is not a
retailer serviced by Dateline’s authorized
distributors or purchased second hand.
10. The Purchaser is responsible for all
postage and freight charges and any
other expenses incidental to claiming
against this Warranty.
11. The Warranty excludes consumable
items (such as blades or brushes) and
normal wear and tear.
12. If you’re certain your product is
defective, and the product is covered by
the terms of this warranty, you need to
take the product back to the place you
purchased it from, where the retailer will
replace the product for you, exchange
defective parts, repair the Product or
refund at Dateline’s discretion. In this
event, per the terms of this warranty
you will need to present this portion
of the warranty information and the
purchase receipt as proof of purchase
so please make sure you keep both
these instructions and your receipt on
hand for the duration of the warranty
period.
6 7