Bacharach 3010 Operation manual

WorldHeadquarters 621Hunt ValleyCircle, NewKensington, PA15068
PH:724-334-5000 •FAX:[phone] •WEBSITE: www.bacharach-inc.com• E-MAIL:[email protected]
PRODUCT
DATA
Leaflet 4133 03/04/02
Printed in U.S.A. ® Registered Trademark
N2OMonitor3010
Size: 5.5"x2.6"x0.8" Weight: 7 oz
Features
• Rapid detection of changing N2O levels
• Continuous data-logging
• 2 TWA capabilities – real time / elapsed time
• Readings can be toggled between TWA and PPM
• No span calibration required – only zero
calibration
• Internal pump for remote sampling with low
flow indicator
• Built-in, user-activated alarm
• Compact and lightweight
• Easy-to-read LCD display
• 8 hours operation on full charge (6 hours with
pump)
• Maintenance free dual wavelength infrared
N2O sensor
• Two-way IrDA communication link
• Pressure compensated sensor
Applications
The N2O Monitor 3010 is a cost-effective
monitoring solution for anesthetists, doctors,
nurses and technicians who work in environments
where there is an occupational risk of exposure to
Nitrous Oxide, including hospital operating and
recovery rooms, medical clinics, surgical centers,
and dental and veterinary offices.
Ordering Information:
Part No. Description
19-7109 N2O Monitor 3010
19-3301 IrDA Interface/Software
19-3302 In-car charger
19-3303 Earphone
19-3311 Plastic Carrying Case
19-3304 Protective Boot
19-8027 Calibration Kit (with regulator & tubing)
23-4003 Calibration Gas (100% N2 17L)
Description
Bacharach’s N2O Monitor 3010 is an affordable and
lightweight personal Nitrous Oxide gas monitor
that continuously measures and rapidly detects
occupational exposure to N2O.
Weighing only 8 ounces, the N2O Monitor 3010 is a
versatile instrument that performs risk
assessments, area monitoring, personal monitoring
and leak detection in environments where there is
a risk of exposure to anesthetic agents. It measures
in 5 PPM increments and features both PPM and
TWA measurement capabilities, which can be
accessed with just a touch of a button. Two modes of
TWA are available – real time (over 8 hours) and
elapsed time (time unit is switched on). A built-in
data- logger provides traceable readings for record
keeping purposes. The N2O Monitor 3010
also includes an internal sampling pump. And, it is
not necessary to span or calibrate the monitor –
zeroing in fresh ambient air or with nitrogen is all
that is necessary.