Badger Basket 98812 User manual

Corner Cubby Storage Unit with
Four Reversible Baskets
VERSION CODE*:
1.0/1119/TG
* Model and Version numbers are needed
if replacement parts are requested
MODEL NUMBER*:
98812 - White
Badger Basket®, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
•assembly video available at Badger Basket’s YouTube channel!
Assembly Instructions. Two Person Recommended -
Adult Assembly Required.
Read all instructions before use.
This manual is part of the product and
must be kept for future reference.

USE AND CARE INSTRUCTIONS:
Wipe storage unit clean with a damp cloth and mild soap as needed. Dry thoroughly.
Do not use acidic cleaners (such as vinegar). Spot clean baskets as needed.
Do not immerse baskets in water. Some soft plastic/rubber toys (such as balls) can react with
Be mindful of what is stored in the unit and regularly check toys and the unit to prevent damage.
WARNING
ADULT ASSEMBLY REQUIRED - TWO PERSON RECOMMENDED
DUE TO THE PRESENCE OF SMALL PARTS AND SHARP
POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
READ ALL INSTRUCTIONS before use of this product.
Keep instructions for future use. Use only the parts and hardware
provided by Badger Basket®. Do not use the product if it is damaged, broken, or
missing parts. DO NOT allow anyone to climb, sit on, stand on, or play on or inside of this
product. It is not a seat, step stool, or ladder. Periodically check to make sure all the
hardware remains tight. No product is a replacement for adult supervision.
WARNING - FAILURE TO FOLLOW THESE
WARNINGS AND THE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When emailing or calling us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 98812
Your Version Code is: 1.0/1119/TG
ASSEMBLY TIPS! Review the entire manual before beginning. Leave hardware slightly loose
during assembly and then go back and tighten fully at the end. If using a power screwdriver,
keep torque setting low and go slow to prevent damage to the product.

F×3 G×3
C×2 D
E
TOOL REQUIRED
(NOT INCLUDED)
A
J×2
N
S×16
R×12 T×12
O×16 P×6
Q×22
K×2 L
M
B
H×2
I×2
5×50mm
15mm
4×50mm
4×35mm 4×35mm
LEFT SIDE RIGHT SIDE CENTER SHELF TOP SHELF
BOTTOM SHELF RIGHT DIVIDER LEFT DIVIDER
LARGE BASKET
BODY
LARGE BASKET
BOTTOM SMALL BASKET
SMALL BASKET
BOTTOM CENTER TOE KICK
LEFT TOE KICK RIGHT TOE KICK LARGE SCREW TOE KICK SCREW
SMALL SCREW PIN
PLASTIC INSERT
CAM

1
3 4
2
Q
QQQQ
QR
R
RR
Q×6 T×4
×3 D
T
T
T
T
T
GF
C
R×4
T×4 R×4
Q×4
R
R
R
R
C
T
T
T
“SCREW THE PINS INTO THEIR CORRESPONDING
HOLES ONLY AS DEEP AS THEIR THREADS FOR
STEPS 2, 4 AND 6. INSERT THE CAMS INTO THEIR
HOLES . SECURE THE CAM AROUND THE HEAD OF
THE PIN BY TURNING CLOCKWISE UNTIL IT IS
TIGHT.”

7 8
QQQ
Q
QQ
QQ
E
T
T
C
Q×4 T×4 R×4
Q×4
RRRR
C
5 6
L
M
PPPPPP
N
P×6 O×8S×8
OOOO
O
O
O
O
A
T
T
S
S
S
S
SS
CAREFULLY TIP THE UNIT ONTO THE
FRONT EDGE BEFORE ATTACHING
A – LEFT SIDE.

9
10
J
K
×2×2
H J
J
H
Q×4
O×8S×8
I
H
S
S
S
QQQQ
OOOO
O
O
O
O
AFTER ATTACHING B – RIGHT SIDE - CAREFULLY TIP THE UNIT INTO THE
UPRIGHT POSITION
B