Badger Meter Dynasonics DXN Series Use and care manual

Hybrid Ultrasonic
DXN Portable Ultrasonic Measurement System
HYB-PM-00095-EN-03 (December 2017) Firmware Update Manual

Hybrid Ultrasonic, DXN Portable Ultrasonic Measurement System
Page ii December 2017HYB-PM-00095-EN-03

CONTENTS
Upgrading Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Quick Boot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Firmware Update Manual
Page iiiDecember 2017 HYB-PM-00095-EN-03

Hybrid Ultrasonic, DXN Portable Ultrasonic Measurement System
Page iv December 2017HYB-PM-00095-EN-03

UPGRADING SOFTWARE
MPORTANTI The Dynasonics USB Update Drive is formatted in FAT/FAT32. NTFS (New Technology File System) formats do
not work.
The upgrade is supplied as a self extracting zip file that you must extract on a PC before it can be loaded into the.
1. Save the supplied zip le to a convenient place on your computer’s hard drive.
2. Double-click on the PortableFlowmeter_YYYYMMDD_RevX.zip le to start the extraction process. The completed
extraction should open the zip le and place the contents in a folder named PortableFlowmeter on your hard drive.
OTE:NThe YYYYMMDD indicates the year, month, and day of the current revision. The Xin the filename stands for the
current revision letter.
Name Date modied Type Size
PortableFlowmeter 4/12/2013 12:20 PM File Folder
3. When the extraction process is complete, copy the entire PortableFlowmeter folder to the USB Update Drive.
4. Start the and let it to get to the Meters (Display ►Meters) screen.
Site Name0.00 GPM
4/12/2013
12:24 PM
Meter Adv Cal System
Display Site Log I/O
AlertsTableGraph SetupGraph
Meters
Flow
0.00
GPM
Totalizer NET TT Quality
0.00
Gallons
0
%
OTE:NRevision E and later of the firmware has multi-language capabilities. To change the language displayed on the menu
tabs, press the language button until the proper language is displayed on the screen.
English German French Spanish Japanese
Russian Portuguese NorweagenSwedishDutchItalian
ORD
E
M
&
P
R
O
G
R
E
S
S
O
5. Insert the USB Update Drive into the USB port on the rear of the and wait 30 seconds for the to recognize the USB Update
Drive.
Upgrading Software
Page 5December 2017 HYB-PM-00095-EN-03

6. From the Display ►Meters screen, press the System tab on the far right of the display.
7. From the System screen, select Update (System ►Update).
Site Name0.00 GPM
4/12/2013
12:24 PM
SystemSite I/O CalAdv
Display Meter Log
Update Comm
Time
PC Storage
Disk
Power ENetMisc
Set Up Quick Boot
Quit Meter to Manage / Update
GUI -> Rev H = V 001.16 20121205.0
DSP -> Rev H =
V 001.16 20121205.0
DASH -> Rev F =
V 001.12 20120821.0
BIOS -> Rev A =
V 001.00 20111112.0
OS -> Rev A =
V 001.02 20121011.0
8. Press the Quit Meter to Manage / Update button.
Site Name0.00 GPM
4/12/2013
12:24 PM
SystemSite I/O CalAdv
Display Meter Log
Update Comm
Time
PC Storage
Disk
Power ENetMisc
Set Up Quick Boot
GUI -> Rev H = V 001.16 20121205.0
DSP -> Rev H =
V 001.16 20121205.0
DASH -> Rev F =
V 001.12 20120821.0
BIOS -> Rev A =
V 001.00 20111112.0
OS -> Rev A =
V 001.02 20121011.0
Quit Meter to Manage / Update
9. Press the Start Updater button.
Upgrading Software
Page 6 December 2017HYB-PM-00095-EN-03

Series DXN
Launch Updater
Rev G
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Start Flowmeter
Start Updater
Flowmeter Administration Tools
10. Press the Unlock button (Step 1: Unlock System (Reboot).
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Check Update Status Quit Update Utility
Restart System
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
UD: XKey1 exists
UD: SR value is 0
UD: Eth Services IP=192.168.0.100 Subnet = 255.255.255.0
UD: Folders
UD: Registry
C:\Documents and Settings\FlowMeterUser> ewfm
Protected Volume Conguration
Type RAM
State ENABLED
Boot Command NO_CMD
Param1 0
Param2 0
Presistent Data “”
Volume ID C7 A2 27 25 00 7E 00 00 00 00 00
Device Name “\Device\HarddiskVolume1” [C:]
Max Levels 1
Clump Size 512
Current Level 1
Memory used for data 6432256 bytes
Memory used for mapping 16384 bytes
Unlock
Lock
Update
Flowmeter
Copy
ORDE
M
&
P
R
O
G
R
E
S
S
O
Update
System
11. A small panel in the center of the screen asks if it is OK to reboot. Remove the USB Update Drive and then press the
OK button.
Upgrading Software
Page 7December 2017 HYB-PM-00095-EN-03

dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
UD: XKey1 exists
UD: SR value is 0
UD: Eth Services IP=192.168.0.100 Subnet = 255.255.255.0
UD: Folders
UD: Registry
C:\Documents and Settings\FlowMeterUser> ewfm
Protected Volume Conguration
Type RAM
State ENABLED
Boot Command NO_CMD
Param1 0
Param2 0
Presistent Data “”
Volume ID C7 A2 27 25 00 7E 00 00 00 00 00
Device Name “\Device\HarddiskVolume1” [C:]
Max Levels 1
Clump Size 512
Current Level 1
Memory used for data 6432256 bytes
Memory used for mapping 16384 bytes
Unlock
Lock
Update
Flowmeter
Update
System
Copy
ORDE
M
&
P
R
O
G
R
E
S
S
O
Check Update Status Quit Update Utility
Restart System
×
OK
Reboot
After the reboot a screen with a grayed out button that says Insert USB Update Drive appears.
Series DXN
Rev G
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Start Flowmeter
Insert USB Update Drive
Flowmeter Administration Tools
12. Insert the USB Update Drive. When the USB Update Drive containing the update is inserted the grayed out button
changes to an active Start Updater button.
Upgrading Software
Page 8 December 2017HYB-PM-00095-EN-03

Series DXN
Launch Updater
Rev G
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Start Flowmeter
Start Updater
Flowmeter Administration Tools
13. Press the Start Updater button.
14. The meter should now be back on the Update screen. Press Update System button Step 2: Update System (Reboot).
OTE:NIf this step was completed in a previous system update the update utility may skip this step and go directly to step 3.
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
ORDE
M
&
P
R
O
G
R
E
S
S
O
UD: XKey1 exists
UD: SR value is 0
UD: Eth Services IP=192.168.0.100 Subnet = 255.255.255.0
UD: Folders
UD: Registry
C:\Documents and Settings\FlowMeterUser> ewfm
Protected Volume Conguration
Type RAM
State ENABLED
Boot Command NO_CMD
Param1 0
Param2 0
Presistent Data “”
Volume ID C7 A2 27 25 00 7E 00 00 00 00 00
Device Name “\Device\HarddiskVolume1” [C:]
Max Levels 1
Clump Size 512
Current Level 1
Memory used for data 6432256 bytes
Memory used for mapping 16384 bytes
Check Update Status Quit Update Utility
Restart System
When the update process is complete a green appears in the Update System (Reboot) box. The screen now also
indicates Reboot. Remove the USB Update Drive and then press the OK button.
Upgrading Software
Page 9December 2017 HYB-PM-00095-EN-03

dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
ORDE
M
&
P
R
O
G
R
E
S
S
O
SET: D:\WindowsD\WMILogs
SET: D:\WindowsD\MSMQLogs
SET: HKEY_CURRENT_USER\Software\Microsoft
SET: HKEY_CURRENT_USER\Software\Microsoft
SET: HKEY_CURRENT_USER\Envrioment fro
SET: HKEY_CURRENT_USER\Envrioment fro
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
OK: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
OK: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
OK: HKEY_LOCAL_MACHINE\SYSTEM\CurrentC
OK: HKEY_LOCAL_MACHINE\SYSTEM\CurrentC
SET: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
SET: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
OK: HKEY_LOCAL_MACHINE\SYSTEM\CurrentC
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
SET: HKEY_LOCAL_MACHINE\SYSTEM\Current
Check Update Status Quit Update Utility
Restart System
×
OK
Reboot
15. When the opening screen reappears, insert the USB Update Drive. The Insert USB Update Drive button changes to a Start
Updater button.
16. Press the Start Updater button.
17. Press the Copy button (Step 3: Copy Updated Files). The text area to the right shows a series of status messages that ends
with “Copying Files Complete 98 Files”.
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
OK: OS Services
OK: Eth Services IP=192.168.0.100 Subnet = 255.255.255.0
OK: Folders
OK: Registry
C:\Documents and Settings\FlowMeterUser> ewfm
Protected Volume Conguration
Type RAM
State ENABLED
Boot Command NO_CMD
Param1 0
Param2 0
Presistent Data “”
Volume ID C7 A2 27 25 00 7E 00 00 00 00 00
Device Name “\Device\HarddiskVolume1” [C:]
Max Levels 1
Clump Size 512
Current Level 1
Memory used for data 0 bytes
Memory used for mapping 0 bytes
Check Update Status Quit Update Utility
Restart System
ORDE
M
&
P
R
O
G
R
E
S
S
O
OTE:NIf the process hangs-up, press the Restart System button which should clear the hang.
OTE:NThe number of files copied may vary from 98.
Upgrading Software
Page 10 December 2017HYB-PM-00095-EN-03