Badger Meter FC-5000 User manual

Industrial Flow Computer
FC-5000 Flow Display
CTL-UM-02765-EN-01 (April 2019) User Manual

Industrial Flow Computer, FC-5000 Flow Display
Page ii April 2019CTL-UM-02765-EN-01

CONTENTS
Scope of This Manual � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Unpacking and Inspection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Safety Considerations� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Terminology and Symbols� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Safety Rules and Precautionary Measures � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Description � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Functions and Features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Flow Meter Input(s) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Digital Inputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Relay Control Outputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Power Supply� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Conguring the Unit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Display Information� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Installing the Flow Display� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Mounting Options� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Wiring the Flow Display � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Operator Interface� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Keypad and Soft Keys � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Scrolling � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Control Panel Keys � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Icon Functionality � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Navigating the Menus � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
Numeric Editing � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20
Alpha-Numeric Editing� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20
Selection/Enumeration Editing � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21
Conrmation Screen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21
Menu Structure � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Info/Sensor Data � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
Info/Sensor Data Table � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
System Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 24
Basic Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25
Display � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25
Resets � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25
Passcode Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 26
Disabling a Passcode � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 26
Units � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27
User Manual
Page iii
April 2019 CTL-UM-02765-EN-01

Advanced Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29
Conguring a Flow Sensor � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29
Conguring Outputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 31
Conguring Digital I/O � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 34
Conguring Communications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 35
Troubleshooting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 36
Modbus Interface � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 38
Modbus Function Code Support� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 38
Modbus Register Map � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 38
Flow Sensor Types � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 39
Part Numbering Construction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 40
Replacement Parts/Accessories � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 40
Specications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 41
Standards and Certications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 44
Agency Approval/Standards � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 44
EMI/EMC Compliance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 44
Enclosure Protection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 44
Industrial Flow Computer, FC-5000 Flow Display
Page iv April 2019CTL-UM-02765-EN-01

Scope of This Manual
SCOPE OF THIS MANUAL
This manual describes how to install and program the FC-5000 Flow Display� The
electronic version of this manual is available on our website
at www.badgermeter.com�
MPORTANTI
Read this manual carefully before attempting any installation or operation.
Keep the manual in an accessible location for future reference.
UNPACKING AND INSPECTION
Upon opening the shipping container, visually inspect the product and applicable
accessories for any physical damage such as scratches, loose or broken parts, or
any other sign of damage that may have occurred during shipment�
OTE:N If damage is found, request an inspection by the carrier’s agent within
48 hours of delivery and file a claim with the carrier� A claim for equipment
damage in transit is the sole responsibility of the purchaser�
SAFETY CONSIDERATIONS
Terminology and Symbols
Indicates a hazardous situation, which, if not avoided, will result in death or
serious personal injury�
Indicates a hazardous situation, which, if not avoided, could result in death or
severe personal injury�
Indicates a hazardous situation, which, if not avoided, could result in minor or
moderate personal injury or damage to property�
Please consult the user manual in all cases where this symbol is used in order to
find out the nature of potential hazards, and any actions which have to be taken
to avoid them�
This symbol signifies that the FC-5000 Flow Display may be powered by a DC
power supply� Acceptable DC input voltage range is: 10…40V DC�
This symbol signifies that the FC-5000 Flow Display may be powered by an AC
power supply� Acceptable AC input voltage range is: 9…28V AC RMS (50…60 Hz)�
• Operating temperature is 32…130° F (0…55° C) with a maximum humidity
of 85% non-condensing� Always select a mounting location with proper
ventilation and environmental protection�
• Maximum operating altitude: 2000 meters (6561 feet)
• Pollution Degree 2: Only non-conductive pollution occurs except that
occasionally a temporary conductivity caused by condensation is to
be expected
• Over-Voltage Rating: CAT II
Page 5April 2019 CTL-UM-02765-EN-01

Safety Considerations
Safety Instructions
• LIFE SUPPORT APPLICATIONS: THE FC-5000 IS NOT DESIGNED FOR USE IN
LIFE SUPPORT APPLIANCES, DEVICES, OR SYSTEMS WHERE MALFUNCTION
OF THE PRODUCT CAN REASONABLY BE EXPECTED TO RESULT IN A PERSONAL
INJURY. CUSTOMERS USING OR SELLING THESE PRODUCTS FOR USE IN SUCH
APPLICATIONS DO SO AT THEIR OWN RISK AND AGREE TO FULLY INDEMNIFY
THE MANUFACTURER AND SUPPLIER FOR ANY DAMAGES RESULTING FROM
SUCH IMPROPER USE OR SALE.
• ELECTROSTATIC DISCHARGE INFLICTS IRREPARABLE DAMAGE TO
ELECTRONICS. BEFORE INSTALLING OR OPENING THE UNIT, INSTALLERS
MUST DISCHARGE THEMSELVES BY TOUCHING A WELL-GROUNDED OBJECT.
• THIS UNIT MUST BE INSTALLED IN ACCORDANCE WITH THE EMC
(ELECTROMAGNETIC COMPATIBILITY) GUIDELINES.
Safety Rules and Precautionary Measures
The manufacturer accepts no responsibility whatsoever if the following safety
rules and precaution instructions and the procedures as described in this manual
are not followed�
• Modifications of the Flow Display implemented without preceding written
consent from the manufacturer will result in the immediate termination of
product liability and warranty period�
• Installation, use, maintenance, and servicing of this equipment must be carried
out by authorized technicians�
• Check the mains voltage and information on the manufacturer’s nameplate
before installing the unit�
• Check all connections, settings and technical specifications of the various
peripheral devices with the Flow Display supplied�
• Never open the enclosure�
• Never touch the electronic components (ESD sensitivity)�
• Never expose the system to heavier conditions than allowed according to the
casing classification (see manufacturer’s nameplate)�
• If the operator detects errors or dangers, or disagrees with the safety
precautions taken, then inform the owner or the principal responsible�
• Adhere to the local labor and safety laws and regulations�
Page 6 April 2019CTL-UM-02765-EN-01

Description
DESCRIPTION
The FC-5000 Flow Display is a microprocessor-driven device that is designed for
flow monitoring� The FC-5000 Flow Display is compatible with the complete line of
Badger Meter industrial flow meters, creating a solution to monitor flow rates
and totals�
Functions and Features
This product is designed with a focus on:
• Large display for easy viewing
• Ease-of-use with softkeys and a full numeric keypad
• Ruggedness for its application with a robust enclosure, keypad and
mechanical relays
• Info/Sensor Data Screen—view raw and calculated data, both to and from the
unit, including flow data and output statuses
• User-friendly installation with quality plug-and-play terminals
• A wide range of outputs and functions for a broad fulfillment in
many applications
• User defined relay triggers for flow rates and totals
Flow Meter Input(s)
Depending on the configuration, one or two sensor inputs are available, allowing
a passive or active pulse signal output to be connected� The input circuit supports
low and high frequency (0�5…3500 Hz) flow meters� A 12V DC excitation terminal
is available for flow meter sensors that require power�
Digital Inputs
The FC-5000 Flow Display control inputs allow the following functions:
• Unlatch Relays
• Reset Totalizers
• Unlatch Relays and Reset Totalizers
Page 7April 2019 CTL-UM-02765-EN-01

Description
Relay Control Outputs
The FC-5000 Flow Display has two relay outputs, either a mechanical Form C
switch or a solid state Form A switch� The product configuration determines which
switches are available� All control functions are always available by dedicated
relay outputs� Unneeded outputs may be left disconnected or disabled within the
firmware�
Relays can be used for alarm indication or as a totalizing output�
Form-C
• Can be powered directly from mains circuits rated up to 240V�
• Must be powered through circuits that are insulated from mains by at least
• basic insulation�
• Connected sources of power need to be limited to 240V AC and fused at 5A
or less�
• Not suitable for connection to external circuits that are insulated from mains by
at least double insulation (SELV)�
Form A
• Located on TB4 and recommended to use, if configured as a high-rate,
totalizing output�
• Relay energizes (contact closes) with a minimum input current of 3 mA through
• the input LED�
• The relay turns off (contact opens) with an input voltage of 0�8V or less�
Power Supply
The power supply used must be isolated from mains by double or reinforced
insulation (for instance, SELV power supply)�
The FC-5000 Flow Display operates on 10…40V DC or 9…28V AC supplied by any
suitable source that also meets the requirement listed above� Badger Meter has
power supplies available for the FC-5000 Flow Display�
Power Supply Part Numbers:
• 68334-001: includes wall mount (wall wart) power supply and various adapters
• 68334-002: power module that allows discrete power wiring
A power supply not sourced from the factory must be capable of supplying a
minimum of 8 Watts�
Conguring the Unit
The FC-5000 Flow Display is designed for many types of applications� See
“Advanced Setup” on page29 for instructions on configuring your
FC-5000 Flow Display to your specific requirements�
All information is stored in EEPROM memory and will not be lost in the event of
power failure�
Page 8 April 2019CTL-UM-02765-EN-01

Installing the Flow Display
Display Information
The FC-5000 Flow Display has a large transflective LCD with a bright LED backlight
that displays symbols and digits for measuring units, status information and
keyword messages� See “Units” on page27 for more information on how to
configure the units�
INSTALLING THE FLOW DISPLAY
MOUNTING, ELECTRICAL INSTALLATION, STARTUP AND MAINTENANCE OF THIS
INSTRUMENT MAY ONLY BE CARRIED OUT BY TRAINED PERSONNEL AUTHORIZED BY
THE OPERATOR OF THE FACILITY. PERSONNEL MUST READ AND UNDERSTAND THIS
OPERATING MANUAL BEFORE CARRYING OUT ITS INSTRUCTIONS.
THE FC5000 FLOW DISPLAY MAY ONLY BE OPERATED BY PERSONNEL WHO ARE
AUTHORIZED AND TRAINED BY THE OPERATOR OF THE FACILITY. OBSERVE ALL
INSTRUCTIONS IN THIS MANUAL.
OBEY ALL SAFETY PRECAUTIONS MENTIONED IN “SAFETY CONSIDERATIONS” ON
PAGE5.
OTE:N For a complete list of parts and accessories, refer to “Replacement Parts/
Accessories” on page40�
Page 9April 2019 CTL-UM-02765-EN-01

Installing the Flow Display
Mounting Options
The FC-5000 Flow Display can be mounted on a wall, shelf or instrumentation
panel� Wall-mount units are shipped in a NEMA 4X enclosure, ready to mount�
Panel-Mount Installations
OTE:N Mounting clips can accommodate a maximum panel thickness of 1�5 in�
(38�1 mm)�
5.40 in.
(137.16 mm)
2.65 in.
(67.31 mm)
Panel Cutout
Figure 1: Panel cutout
3.07 in.
(78.00 mm)
5.38 in.
(136.65 mm)
2.54 in.
(64.52 mm)
3.50 in.
(89.00 mm)
6.22 in.
(158.00 mm)
Figure 2: Mounting dimensions
To install:
1� Measure and cut a mounting hole to the dimensions shown in Figure 1�
2� Verify that the gasket is secure inside the mounting bezel�
3� Insert the unit through the panel cutout�
4� Secure the unit to the panel with the provided mounting clips�
Page 10 April 2019CTL-UM-02765-EN-01

Installing the Flow Display
Wall-Mount Installations
9.65 in.
(242.83 mm)
8.00 in.
(203.20 mm)
4.88 in.
(123.95 mm)
9.38 in.
(238.25 mm)
8.75 in.
(222.25 mm)
6.00 in.
(152.40 mm)
9.38 in.
(238.25 mm)
Figure 3: FC-5000 Flow Display in an enclosure
To install the FC-5000 Flow Display on a wall, secure the enclosure to the wall with
four mounting screws (customer-supplied)�
Page 11April 2019 CTL-UM-02765-EN-01

Installing the Flow Display
Wiring the Flow Display
At installation, be sure to comply with the following requirements:
• Disconnect power to the unit before attempting any connection or service to
the unit�
• Avoid using machine power service for AC power� When possible, use a
dedicated circuit or a lighting circuit�
• Observe all local electrical codes�
• The unit must be wired with wires and/or cables with a minimum temperature
rating of 167° F (75° C)�
TO PREVENT ACCIDENTS, DO NOT APPLY POWER UNTIL ALL OTHER
CONNECTIONS HAVE BEEN COMPLETED.
Terminal Connectors
Figure 4: One sensor input, frequency output
Figure 5: One sensor input, analog out
Page 12 April 2019CTL-UM-02765-EN-01

Installing the Flow Display
Figure 6: Two sensor inputs, frequency output
Figure 7: Two sensor inputs, analog output
Power Input
The FC-5000 Flow Display power input is internally fused and protected from
common line noise by a filtering network�
TB1 (POWER)
Connector Pin Function Reference Pin
AC Power DC Power
1 Line (L) Positive (L+) 1
2 Shield (Chassis GND) 2
3 Neutral (N) Negative (L–) 3
4 Digital I/O GND 4
Table 1: Power input
THE FC5000 IS MICROPROCESSOR CONTROLLED. IT IS VERY IMPORTANT THAT THE
POWER SUPPLY BE FREE OF ELECTRICAL NOISE. AVOID USING POWER LINES THAT
FEED HEAVY LOAD ELECTRICAL DEVICES SUCH AS PUMPS AND MOTORS.
Page 13April 2019 CTL-UM-02765-EN-01

Installing the Flow Display
Digital Inputs and Outputs
The FC-5000 Flow Display has six independent channels available for digital input�
The channels accept TTL voltage signals in the 0…5V DC range� The control inputs
are triggered when the voltage signal on the pin is pulled low (active low)� Input
range for a logic low signal is 0…1V, logic high is 4…5V�
TB2 (DIG I/O)
Connector Pin Function Reference Pin
1 Excitation or Power 5
2 Input/Output 1 Signal 6
3 Input/Output 1 Signal 7
4 Input/Output 1 Signal 8
5 Input/Output 1 Signal 9
6 Input/Output 1 Signal 10
7 Input/Output 1 Signal 11
8 Ground or Neutral 12
Table 2: Digital inputs
Communications
The FC-5000 Flow Display comes with a Modbus (RTU or ASCII) communication
protocol� Signals are transmitted over an EIA-485 (RS-485) physical layer�
TB8 (RS485)
Connector Pin Function Reference Pin
1 Shield (Chassis GND) 36
2 Negative (–) 37
3 Positive (+) 38
4 Output Ground 39
Table 3: Communications input
Page 14 April 2019CTL-UM-02765-EN-01

Installing the Flow Display
Scaled Outputs
The FC-5000 Flow Display has two scaled output channels for use in applications
requiring remote data collection and/or monitoring� The outputs are firmware
configurable, and can be tied to parameters such as rates or total volume�
TB7 (FREQ OUT) or (ANALOG OUT)
Connector Pin Function Reference Pin
1 Output 1 Signal 32
2 Output 2 Signal 33
3 Output Ground 34
4 Shield (Chassis GND) 35
Table 4: Scaled output channels
ANALOG OUTPUT CONFIGURATIONS ARE DESIGNED TO PROVIDE A SOURCING
OUTPUT SIGNAL. THE RECEIVING DEVICE MUST NOT PROVIDE POWER TO
THE LOOP.
Relay Output Connectors
The FC-5000 Flow Display has either two Form C relay output terminals or one
Form C and one Form A terminal�
Two Form C
TB3 (RELAY 1) and TB4 (RELAY 2)
Connector Pin Function Reference Pin
Relay 1 Relay 2
1 Normally Open (N�O�) 13 16
2 Signal Common 14 17
3Normally Closed (N�C�) 15 18
Table 5: Relay output connectors, relay option "C"
One Form C and One Form A
TB3 (RELAY 1) - Form C
Connector Pin Function Reference Pin
Relay 1
1 Normally Open (N�O�) 13
2 Signal Common 14
3Normally Closed (N�C�) 15
Figure 8: Form C Relay Output Connector
TB4 (RELAY 2) - Form A
Connector Pin Function Reference Pin
Relay 2
1 Connection Point 1 16
2 Not Used (No Contact) 17
3 Connection Point 2 18
Figure 9: Form A Relay Output Connector
Page 15April 2019 CTL-UM-02765-EN-01

Installing the Flow Display
Flow Sensor Input
The FC-5000 Flow Display is designed to accept pulses from open collector
transistors or dry contact closure transmitters�
Before making any connections:
• Always use shielded wire to protect the signal line from external noise (ground
shield to terminal #3)�
• Make sure the signal lines are not bundled with or touching power lines�
OTE:N In the tables below, RF Pin refers to RF type pickups/amplifiers�
TB5 - Single Channel Pulse Input Terminal
Connector
Pin Function Reference
Pin RF Pin
1 Sensor Excitation (+) 19 A
2 Sensor Input (+) 20 C
3 Sensor Input/Common (-) 21 B
4 Shield (Chassis GND) 22 —
Table 6: Flow sensor input, single
TB5 - Dual Channel Pulse Input Terminal
Connector
Pin Function Reference
Pin RF Pin
1 Excitation (+12V output) 19 A
2 Sensor Input CH1 20 C
3 Sensor Common (GND) 21 B
4 Sensor Input CH2 22 C
5 Shield (Earth GND) 23 -
Table 7: Flow sensor input, dual
Powering Radio Frequency (RF) Type Pickups
Radio Frequency (RF) type pickups require a power source to generate a radio
frequency field� Similar to magnetic pickups, as fluid velocity provides rotational
energy on the flow meter rotor, the field generated by the pickup is disturbed,
producing output pulses that are proportional to flow rate�
OTE:N Maximum current draw from the Excitation pin cannot exceed 200 mA� RF
style pickups will require a signal conditioning amplifier�
0…5V, 0…10V Configuration Source Voltage Configuration
From
Pickup/
Amplier
From
Pickup/
Amplier
To
Flow
Display
Figure 10: Pickup configurations
Page 16 April 2019CTL-UM-02765-EN-01

Operator Interface
OPERATOR INTERFACE
Keypad and Soft Keys
The keypad and soft keys are for programming, editing and changing views�
Scrolling
The screens can display up to four lines at a time� Some menus have more than
four items to display� To see the off-screen items, press UP/DOWN to scroll
through the entire list�
THE FLOW DISPLAY MAY BE OPERATED ONLY BY PERSONNEL WHO ARE AUTHORIZED
AND TRAINED BY THE FACILITY. OBSERVE ALL INSTRUCTIONS IN THIS MANUAL. OBEY
ALL SAFETY PRECAUTIONS MENTIONED IN “SAFETY CONSIDERATIONS” ON PAGE5.
Control Panel Keys
OTE:N Always press (ENTER) to save a new value�
The numbered keys are used to enter or change parameter values�
In editing mode, BACKSPACE deletes the character to the left of the
cursor� While navigating, BACKSPACE moves to a previous menu
selection�
Depending on the current screen, ENTER:
• Saves the current value and ends the editing session
• Advances deeper into the menu structure
• Toggles enumerations
The UP/DOWN keys:
• Toggle the display views on the home screen
• While editing, use UP/DOWN to advance the cursor to the right or left
• In the menu structure, scroll through the menus and parameters
The F1…F4 function keys are soft keys that change
function to whichever icon is present above them�
See “Icon Functionality” on page18�
Table 8: Key functions
Page 17April 2019 CTL-UM-02765-EN-01

Operator Interface
Icon Functionality
Depending on the task being performed, one or more of the following icons may
appear on the screen� To activate an icon, press the Function key (F1, F2, F3 or F4)
directly under the icon, where applicable�
Icon Function
Display the Home screen or cancel an edit (if you activate it without saving first)
Display the menu structure
Create a custom label (name) for unit of measure
Return to Setup menu
Cycle through alpha characters
Enter a decimal point
Cycle through special characters
Reveal raw and calculated info/sensor data for the Flow Display
Clear the selected value or cancel edit (press twice, consecutively)
Enter conversion factor for custom unit of measure
Change selected value to positive ( + ) or negative ( – )
Set totalizer rollover point
Appears on Home screen for various events� Refer to “Troubleshooting” on page36
for details�
Enter K-factor in multi-point calibration table
Enter frequency-in-hertz calibration data
Toggle flow sensor channels
Table 9: Icon functions
Page 18 April 2019CTL-UM-02765-EN-01

Operator Interface
Navigating the Menus
The Home screen display shows rates and totals, either separately or
simultaneously� Status and alarm messages or alarm icons appear on the display
when appropriate�
Single Input Configurations
Press UP/DOWN to toggle between parameter views on the Home screen:
• Flow Rate
• Flow Total
• Flow Rate and Flow Total
Figure 11: Single input display
Dual Input Configurations
Press UP/DOWN to toggle between parameter views on the Home screen� Press
F3 to toggle between flow meters/sensors 1 and 2�
• Flow Rate 1 or Flow Rate 2
• Flow Total 1 or Flow Total 2
• Flow Rate 1 and Flow Total 1
• Flow Rate 2 and Flow Total 2
Figure 12: Dual input display
Press F1 to enter the Main menu to access Setup and System Information, or press
F2 to enter the INFO/SENSOR DATA menu�
Page 19April 2019 CTL-UM-02765-EN-01

Operator Interface
Numeric Editing
FC-5000
Clear entire new value or
cancel edit (press twice, consecutively)
Save value
Return to
parent setup
screen
Add a
decimal
point
Make entry
positive or
negative
Delete
character to
the left
OR
Return to
previous
menu
On-screen
instruction
Move
cursor to
the right
Existing
Value
Move
cursor to
the left
New Value
Figure 13: Numeric editing
Alpha-Numeric Editing
On-screen
instruction
New
value
Return to
parent
setup
screen
Cycle
through
letters
Cycle
through
special
characters
Move cursor
to the right
Move cursor
to the left
Existing
value
Clear entire new value or
cancel edit (press twice, consecutively)
Save value
Delete
character to
the left
OR
Return to
previous
menu
Figure 14: Alpha-numeric editing
Page 20 April 2019CTL-UM-02765-EN-01