BALDR B0323H User manual

THERMO-HYGROMETER
USER MANUAL
MODE: B0323H

We hereby thank you for the purchase of Baldr Digital Thermo-hygrometer. We design
and manufacture the item using innovative components and techniques to enable the
perfect display of temperature and humidity by this device. Please read the instructions
carefully and get familiar with the functions properly before using it.
For the start-up of this device you require:
1x AAA battery (not included)
Main Unit
OVERVIEW
1. Max/Min record of temperature and humidity
2. °F/°C switch
1
2
F/C

POWER ON
GETTING STARTED
LCD SCREEN DISPLAY
FEATURES
1. Remove the battery compartment cover,
2. Insert 1x AAA battery matching the polarity (+and-).
1. Big temperature & humidity display with cute outlook
2. Temperature range: 14 ~122 （-10°C~50°C）
3. Humidity range: 10%RH~99%RH
4. With Max & Min records
5. Wall hanging or table standing
Temperature
Humidity
°F °F

PRECAUTIONS
Do not clean any part of the product with benzene,thinner or other solvent chemicals.
When necessary,clean it with a soft cloth.
Never immerse the product in water. This will damage the product.
Do not subject the product to extreme force,shock,or fluctuations in temperature or
humidity.
Do not tamper with the internal components.
Remove the batteries if storing this product for a long period of time.
Do not dispose of this product as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
TEMPERATURE & HUMIDITY
1. The indoor temperature and humidity will display automatically after setting up.
2. Press and release the “MAX/MIN” key on the front panel repeatedly, the current indoor
temperature /humidity will alternate between MAX/MIN temperature/humidity records and
the current value.
Press and hold the “MAX/MIN” key for 2 seconds to clear the MAX and MIN data.
3. For switching from °F and °C, press the button on the back.
POSITIONED METHOD
The thermometer can be positioned in 2 ways as desired.
A. Pull out the table stand bracket from the rear of the thermo-hygrometer and place it on
table or desk as desired.
B. Hang on the wall by hanging hole.

WARRANTY
BALDR provides a 1-year limited warranty on this product against manufacturing
defects in materials and workmanship.
Warranty service can only be performed by our authorized service center. The original
dated bill of sale must be presented upon request as proof of purchase to us,or our
authorized service center.
The warranty covers all defects in material and workmanship with the following
specified exceptions: (1) damage caused by accident, unreasonable use or neglect
(including the lack or reasonable and necessary maintenance); (2) damage occurring
during shipment (claims must be presented to the carrier); (3) damage to,or
deterioration of any accessory or decorative surface; (4) damage resulting from failure
to follow instructions contained in your owner’s manual.
This warranty covers only actual defects within the product itself,and does not cover
the cost of installation or removal from a fixed installation, normal set-up or
adjustments,claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
To receive warranty service, the purchaser must contact with BALDR nominated
service center for the problem determination and service procedure.
Thank you for your choice of BALDR products!

66-BALDRB0323-001
www.baldr.com