BALDR B0006STH User manual

DIGITAL BATHROOM CLOCK
We thank you for the purchase of Baldr Digital Bathroom Clock. It has been designed and constructed using
innovative components and techniques to enable the perfect display of time,temperature and humidity on this
device. Please read the instructions carefully to become familiar with the properties and functions, before you
use the unit.
USER MANUAL
For the start-up of this device you require: 1 x AA Battery (Not included)
MODEL: B0006STH

OVERVIEW

TIME SET
1. The initial preset time is 12:00 AM.
2. Press “SET” to change the time. The figure to be set will be flashing.
3. Press “UP” to adjust, then “SET” to go to the next figure.
4. The setting order is: Minute, Hour, 12/24-hr format, Month, Date.
5. Press “SET” again to confirm and exit setting mode.
TEMPERATURE DISPLAY
1. The indoor temperature will display automatically after powering on.
2. Press “℉/℃” key to switch between Fahrenheit and Celsius
3. Temperature range: -58℉~158℉(-50℃~+70℃)
HUMIDITY DISPLAY
1. The indoor humidity will display automatically after powering on.
2. Humidity range: 10%~99%
POSITIONED METHODS
The bathroom clock can be positioned in 3 ways as desired:
A. On a table or desk by pulling out the table stand brackets from behind
the clock.
B. On a wall by using the hanging hole
C. On smooth vertical surface with four strong suction cups

RESET
Press “RESET” to return to default settings.
PRECAUTIONS
• Do not clean any part of the product with benzene, thinner or other
solvent chemicals. When necessary, clean it with a soft cloth.
• Never immerse the product in water. This will damage the product.
• Do not subject the product to extreme force, shock, or fluctuations in
temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of different types.
• Do not mix alkaline, standard or rechargeable batteries with this product.
• Remove the batteries if storing this product for a long period of time.
• Do not dispose of this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.

WARRANTY
BALDR provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
Warranty service can only be performed by our authorized service center.
The original dated bill of sale must be presented upon request as proof of
purchase to us, or our authorized service center.
The warranty covers all defects in material and workmanship with the
following specified exceptions:(1) damage caused by accidents,
unreasonable use or neglect (including the lack or reasonable and
necessary maintenance); (2) damage occurred during shipment (claims
must be presented to the carrier); (3) damage to, or deterioration of any
accessory or decorative surface;(4) damage resulting from failure to follow
instructions contained in your owner’s manual.
This warranty covers only actual defects within the product itself, and does
not cover the cost of installation or removal from a fixed installation, normal
set-up or adjustments, claims based on misrepresentation by the seller or
performance variations resulting from installation-related circumstances.
To receive warranty service, the purchaser must contact the BALDR
nominated service center for the problem determination and service
procedure.
Thank you for your choice of BALDR products!

www.baldr.com
[e-mail]