BALDR B0201WST2H2 User manual

with Thermometer and humidity Weather Station
We thank you for your purchase of BALDR Weather Station with Thermometer and Humidity. It has been
designed and constructed using innovative components and techniques to enable the perfect display of time，
temperature and humidity by this device. Please read the instructions carefully to become familiar with the
properties and functions before you use the unit.
USER MANUAL
For the start-up of this device you require: Main unit by 2xAAA batteries
MODEL: B0201WST2H2
Sensor by 2xAAA batteries

OVERVIEW
MAIN UNIT
LCD DISPLAY
1. Weather Forecast
2. Outdoor Temperature
3. Indoor Temperature
4. Current Time
5. Outdoor Sensor Channel
6. Outdoor Humidity
7. Indoor Humidity
8. Calendar and Moon Phase
9. Touch Buttons
1
2
5
6
7
8
9
3
4

OUTDOOR SENSOR
FEATURES
GETTING STARTED
1. Indoor and outdoor temperature (ºC/ºF Selectable)
2. Indoor temperature range: 0℃~50.0℃（14℉~122℉）
3. Outdoor temperature range: -20℃~65℃（-4℉~149℉）
4. Indoor and outdoor humidity range: 20%~95%
5. Records max/min temperature and humidity (in and out)
6. Weather forecast for 5 modes: Sunny, Sunny To Cloudy, Cloudy, Rainy,
Stormy
7. RF Channel For Outdoor Sensor
8. Alarm and snooze function
9. Time display in 12/24H
10. White backlight lasts for 10 seconds after pressing the “Snooze/Light”
button
11. 100 meters wireless transmitter in open area
12. Moon phase and calendar function
MAIN UNIT INSTALLATION
1. Remove the battery compartment cover.
2. Insert 2x AAA batteries matching the polarity (+and-).

FUNCTION BUTTONS
1. Remove the battery compartment cover.
2. Insert 2xAAA batteries matching the polarity (+and-).
After power on, LCD will full display for 1 second, and in the meanwhile hygr-
ometer will detect indoor temperature & humidity, and then it will start to rec-
eive outdoor signal which lasts for max 3 minutes
SENSOR INSTALLATION
Initialize
Function
Operation
MEM/▼
AL/SET
CH/▲
SNOOZE/LIGHT
Standard
Time
Mode
Press
Check
Max/Min
Record
Switch to
Alarm Time
Mode
Switch channel Backlight on
Hold ------
Enter Into Time Set
Mode
RF
re-registration
-----
Alarm
Time
Mode
Press Alarm on/off
Switch to
Standard Time
Mode
Switch channel Backlight on
Hold ------ Enter Into Alarm
Time Set Mode
RF
re-registration -----
Time Set
Mode
Press Decrease 1
step Confirm and go next Increase 1 step Backlight on
Hold Decrease in 8
steps ------ Increase in 8 steps -----
Alarm
Time Set
Mode
Press Decrease 1
step Confirm and go next Increase 1 step Backlight on
Hold
Decrease in 8
steps ------
Increase in 8
steps -----
Alarm
Mode
Press Alarm off Alarm off Alarm off Snooze Function
Hold ------ ------ ------ Alarm off

1. Press and hold “AL/SET” button to enter into time setting; the setting data
will be flashing in 1Hz.
2. Press “MEM/▼” or “CH/▲” button to adjust data; press and hold “MEM/
▼” or “CH/▲” button will quickly change the data by 8 steps.
3. The setting order is: Year →Month →Day →Weekday Language →Time
zone →12/24H →Hour →Minute →C/F →Exit.
4. There are 7 languages selectable for weekday display: FR, NE, ES, DR, EN,
GE, IT (French, Dutch, Spanish, Denish, English, German, Italian)
5. If no operation for 20 seconds, it will automatically save and exit setting.
TIME SET
1. On normal time display mode, press “AL/SET” button to switch to alarm
display mode.
2. Press and hold “AL/SET” button to enter into alarm time setting mode.
3. Press “MEM/▼” or “CH/▲” button to adjust data; press and hold “MEM
/▼” or “CH/▲” button will quickly change the data by 8 steps.
4. The setting order is: Hour →Minute→Exit.
5. On alarm display mode, press the “MEM/▼” button to turn on/off the alarm.
6. If no operation for 20 seconds, it will automatically save and exit setting.
ALARM SET
1. When alarm is ringing, press “SNOOZE/LIGHT” button to activate snooze
function. And the alarm will ring again in 5 minutes.
2. Press and hold “SNOOZE/LIGHT” button for more than 3 seconds will
stop the alarm; or press any other button to stop the alarm. And the
alarm will restart next day.
3. The ascending “Bibi” alarm sound will last for 2 minutes if no operation.
ALARM AND SNOOZE
1. Press “MEM/▼” to have maximum temperature and humidity, the value
will display 5 seconds.
2. Press “MEM/▼”second time to have the minimum temperature and hu-
midity, the value will display 5 seconds.
3. Press “MEM/▼”third time will return to standard mode.
MAX AND MIN RECORD

OUTDOOR CHANNEL
WEATHER FORECAST
4. Press and hold “MEM/▼” will clear the max and min record and reactivate
the memory.
5. Normally, the Max and Min record will update every 24 hours on 0:00.
The weather forecast icon will show after power on. There are 5 kinds of
weather modes: Sunny, Sunny To Cloudy, Cloudy, Rainy, Stormy.
The weather icon displays are based on the hourly calculation of indoor/
outdoor temperature and humidity data.
The forecast is for next 12-24 hours.
MOON PHASE
The moon phase will be changed when calendar changes:
1. Hygrometer will auto receive outdoor signal after power on, the receiving
status will last for max 3 minutes, the receiving antenna signal will flash,
if no signal received in 3 minutes, will not exist and stop receiving outdoor
signal
2. Press “CH/▲” button to change the channel
3. The setting order is CH1 --> CH2--> CH3 -->Channel scan (from CH1 to
CH2 to CH3, 10 seconds intervals)
4. Press and hold “CH/▲” button for more than 3 seconds to manually enter
into RF re-registration, press and hold “CH/▲” button for 3 seconds again
will exit RF registration
5. The current outdoor temperature and humidity data will be cleared during
re-registration status
6. Remark: if hygrometer has received outdoor data successfully before, in
next 60 minutes if lost signal, the hygrometer outdoor area will display “--.--”

BALDR provides a 1-year limited warranty on this product against manuf-
acturing defects in materials and workmanship.
Warranty service can only be performed by our authorized service center.
The original dated bill of sale must be presented upon request as proof of
purchase to us, or our authorized service center.
The warranty covers all defects in material and workmanship with the fol-
lowing specified exceptions:(1) damage caused by accident, unreasonable
use or neglect (including the lack or reasonable and necessary maintena-
nce); (2) damage occurring during shipment (claims must be presented to
the carrier); (3) damage to, or deterioration of any accessory or decorative
surface;(4) damage resulting from failure to follow instructions contained in
your owner’s manual.
This warranty covers only actual defects within the product itself, and does
not cover the cost of installation or removal from a fixed installation, normal
set-up or adjustments, claims based on misrepresentation by the seller or
performance variations resulting from installation-related circumstances.
To receive warranty service, the purchaser must contact with BALDR nom-
inated service center for the problem determination and service procedure.
Thank you for choosing BALDR products!
PRECAUTIONS
WARRANTY
Do not clean any part of the product with benzene, thinner or other
solvent chemicals. When necessary, clean it with a soft cloth.
Never immerse the product in water. This can cause electrical shock
and damage the product.
Do not subject the product to extreme force, shock, or fluctuations in
temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of different types.
Do not mix alkaline, standard or rechargeable batteries with this product.
Remove the batteries if storing this product for a long period of time.
Do not dispose of this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.

www.baldr.com
[e-mail]