Barco MUIP-2112 User manual

ENABLING BRIGHT OUTCOMES
User Guide
12.5”LCD User Interface
MUIP-2112

Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com

3K5902132 (451920612534) /03 MUIP-2112
1 Welcome!.......................................................................................................................................................................................................... 5
1.1 What's in the box................................................................................................................................................................................6
1.2 Product overview................................................................................................................................................................................6
2 Installation ....................................................................................................................................................................................................... 9
2.1 Cable connections..........................................................................................................................................................................10
2.2 Cable routing ..................................................................................................................................................................................... 11
2.3 Desktop support installation (optional)................................................................................................................................12
3 Maintenance...............................................................................................................................................................................................15
3.1 Scheduled maintenance .............................................................................................................................................................16
3.2 Cleaning...............................................................................................................................................................................................16
4 Important information.........................................................................................................................................................................17
4.1 Safety information...........................................................................................................................................................................18
4.2 Environmental information.........................................................................................................................................................21
4.3 Biological hazard and returns ..................................................................................................................................................23
4.4 Regulatory information.................................................................................................................................................................23
4.5 EMC notice .........................................................................................................................................................................................24
4.6 Explanation of symbols................................................................................................................................................................27
4.7 Legal disclaimer...............................................................................................................................................................................29
4.8 Technical specifications...............................................................................................................................................................30
Table of contents

K5902132 (451920612534) /03 MUIP-21124

5K5902132 (451920612534) /03 MUIP-2112
Introduction
The MUIP-2112 computing Touch Screen Module is a smart 12.5”display. it is released with or without
Windows OS (the units provided with Windows OS have the sticker license applied on to the rear side). Its
ruggedized design, compact size and touch-screen interface makes it suitable for system control applications.
The MUIP-2112 is not intended to be a portable device. The internal battery (if present) is foreseen mainly to
prevent the operative-system from crashing in case of momentary drop of the mains power. The internal
battery capacity could maintain the unit to work for a time of about one hour, maximum. In the normal
application of MUIP-2112 installed in a system on a VESA-arm or a desktop-support with power-supply and
LAN-cables connected, the internal battery is constantly maintained at full-charge, and is not submitted to
frequent charge-discharge cycles.
Warnings, cautions, notes and tips
There are four levels of precautionary or advisory statements that may be used in this user guide. In
descending order of importance, they are:
WARNING: Describes hazards or dangers that might result in personal injury or death.
CAUTION: Describes hazards that could damage the product.
Gives additional information about the described subject.
Gives extra advice about the described subject.
Welcome! 1

K5902132 (451920612534) /03 MUIP-21126
1.1 What's in the box
Overview
•MUIP-2112 12.5”Computing Touchscreen Module
•Power supply 19V 65W AC-DC external unit (depending on model)
•Two mains power cords (EU and US versions) (depending on model)
•1 x user guide
Keep your original packaging. It is designed for this display and is the ideal protection during
transport and storage.
1.2 Product overview
Front
13 2
Image 1–1
1. MUIP-2112
2. Power Button:
Push short to turn the equipment ON/OFF.
3. Desktop support (optional)
Welcome!

7K5902132 (451920612534) /03 MUIP-2112
Back
1
2
12
1
43 5 6 7 8 9 10 11
13
Image 1–2
1. Rear cover fixation screw holes (2x)
2. Rear cover (standard open / optional closed version)
3. Reset Button (activation with the aid of a pin/staple)
4. Audio Microphone Input Jack
5. Audio Line Output stereo jack
6. Video Output mini DP++ interface (for connecting an external DP or HDMI monitor)
7. 1 x USB 2.0 port Type A connector
8. 1 x USB 3.0 port Type A connector
9. Gigabit Ethernet Connector (LAN1)
10.Gigabit Ethernet Connector (LAN2)
11. Power jack input connector (range 12–24Vdc, nominal 19Vdc)
12.VESA 75 mm mounting screw holes (4x)
13.Strain-relief cable (depending on model –designed according to customer specifications)
Welcome!

K5902132 (451920612534) /03 MUIP-21128
Welcome!

9K5902132 (451920612534) /03 MUIP-2112
WARNING: Read all the important safety information before installing and operating your monitor.
Please refer to the dedicated chapter in this user guide.
WARNING: Sufficient expertise is required to install this equipment. All devices and complete setup
must be tested before taking into operation.
CAUTION: When the display is assembled in the medical system, take care of the fixation of all
cables, to avoid unwanted detachment.
CAUTION: The equipment is not intended to be sterilized.
Installation 2

K5902132 (451920612534) /03 MUIP-211210
2.1 Cable connections
Opening and closing the rear cover
1. Remove the two rubber-caps which cover the fixation screws.
2. Remove the two fixation screws and remove the rear cover from the MUIP-2112.
Image 2–1
3. To properly close the rear cover, first route the cables as described in “Cable routing”, page 11. Install the
rear cover and follow the above steps in reverse order.
Power and LAN connection
The MUIP-2112 Computing Touch-Screen Module working as an intelligent User-Interface is usually
connected to the system via Ethernet LAN connection and / or USB interface connection.
1. Connect the power connector to the power jack input.
Image 2–2
2. Connect the LAN connector to the LAN input.
Image 2–3
Installation