Bartec MC 9190ex-NI User manual

Mobile Computing
User Manual
Mobile Computer MC 9190ex-NI, Type B7-A28.-..../........
Document No. B1-A280-7D0001 Issue: April 2011
ATEX Zone 2 UL Division 2

GmbH
Max-Eyth-Straße 16
Phone:[phone]
Contact:
97980 Bad Mergentheim
Fax:[phone]
[e-mail]
Germany
User Manual
Mobile Computer MC 9190
ex
-NI
Type B7-A28.-…./…….
ATEX Zone 2
UL Class I, II, III Division 2
Document No. B1-A280-7D0001
Issue: Revision 2 / August 2012
Reservation: Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
Contents Page
English 1 - 50
Appendix Declaration of Conformity
Certificate of Compliance

- blank -

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… General
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
Notes on this manual
The user manual is a constituent part of the product and must be kept in the direct vicinity
of the device and accessible at all times to installation, operating and maintenance
personnel.
It contains important notes, safety instructions and test certificates which are necessary
for perfect functioning when the devices are being operated and handled. It is written for
technically qualified personnel.
Familiarity with and the technically perfect implementation of the safety instructions and
warnings described in this manual are preconditions for safe installation and
commissioning. The safety notes and warnings given in this documentation are given in a
general way and only qualified personnel will have the necessary specialised know-how to
interpret and implement them correctly in specific cases.
Qualifications of the personnel working with the devices
The user manual is written for all people who carry out assembly, installation,
commissioning and service work on the product, whereby the directives and standards
99/92/EC, EN 60079-17, EN 60079-19 for the gas area and EN 61241-17 and
EN 61241-19 forthe dust area must be observed.
Changes to the document
BARTEC reserves the right to alter the contents of this document without notice. No
guarantee isgiven for the correctness of the information.
In the event of a legal dispute, the “General Terms and Conditions” of the BARTEC group
shall apply in addition.
The respective up-to-date versions of data sheets, manuals, certificates, EC Declaration
of Conformity may be downloaded from the “Ex Visualisation and Communication
Systems” product page at www.bartec-group.com or ordered directly from BARTEC
GmbH.
Handling the Product
The documents are currently available in English.
The product described in this manual has been tested and left the factory in perfect
condition as regards meetingsafety requirements.
To maintain this condition and ensure that this product operates perfectly and safely, it
may be used only in the manner described by the manufacturer. Appropriate
transportation, suitable storage and careful operation are also essential for the perfect and
safe operation of this product.
Read carefully
before putting
the devices into
operation.

General Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
Use for the Intended Purpose
Note
The versions, components, screens and windows illustrated in this User Manual are
examples only and can deviate from the actual display.
The information treated in this User Manual relates to the explosion protected version of
the MC 9190ex-NI Series.
This User Manual contains all important information concerning explosion protection. In
addition, the original user
manuals and product information from Motorola are also
available and these contain information about handling and commissioning. In the event
of information overlap, the information in this User Manual is valid and replaces the
Motorola information.
Documentation Set
BARTEC
−User manual for the MC 9190ex-NI mobile computer series
(part no. B1-A280-7D0001). This user manual describes the use of the explosion
protected version of the MC 9190ex-NI mobile computer series.
−Technical data sheet for the explosion protected version of the MC 9190ex-NI mobile
computer series - This Technical Data Sheet describes the most important ex
technical and general technical data.
−The current version of this user manual is available upon enquiry.
Motorola The documentation set for the MC9190 provides information corresponding with the
respective user requirements and comprises:
−MC9190-G Series Regulatory Guide
−User manual for the MC9190-G mobile computer series - This user manual
describes the use of the MC9190-G mobile computer series.
−User manual for integration of the MC9190-G mobile computer series
This user manual describes the setup of the MC9190-G mobile computer, including
accessories.
−Microsoft® Applications for Windows Mobile® 6 User Guide
This user guide describes the use of Microsoft applications.
−Device Configuration Package
(DCP for MC9190c60) and Platform SDK (PSDK9190c60) for MC9190-G with
Windows Mobile, available at:
http://www.supportcentral.motorola.com
−Enterprise Mobility Developer Kit
This EMDK file includes API information about writingapplications, available at:
http://www.supportcentral.motorola.com
−Latest Active Sync-Software, available at:
http://www.microsoft.com

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… General
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
−The current version of the Motorola documentation is available at:
http://www.motorola.com/enterprisemobility/manuals
For Software Installation and Adjustment Possibilities refer to the Symbol/Motorola
manual:
http://www.supportcentral.motorola.com
under: - Support - Get Product Manuals - Product Manuals - Mobile Computers -
MC 9190-G
Safety Instructions
Safety instructions and warnings are specially highlighted in this manual and marked by
symbols.
The safety instructions and warnings are assigned to the individual work steps. Careful
handling and consistent observation of the instructions will prevent accidents, personal
injuries and damage to property.
The adherence to all directions and safety instructions in this manual is a precondition for
safe working and the correct handling of the device.
The graphic representations in these instructions serve to show the information being
described and are not necessarily true to scale and they may deviate slightly from the
actual construction of the device.
Marking
Particularly important points in these instructions are marked with a symbol:
Danger!
Non-observance leads to death or serious physical injury.
The necessary safety measures must be taken.
Caution!
Warning of damage to property and financial and penal disadvantages
(e.g. loss of guarantee rights, liability etc.).
Attention! Important instructions and information on preventing disadvantageous behaviour
Note
Important instructions and information on effective, economical
and environmentally compatible handling.
Read carefully
before putting the
devices into
operation.

General Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
Configurations
This user manual refers to the following configurations:
Confi-
guration Wireless Display Memory Data acquisition option OS Key- pad
MC 9190ex-
NI
WLAN:
802.11 a/b/g
WPAN:
Bluetooth
3.7"- Colour display
256 MB RAM/1 GB Flash memory
1D Laser scanner
Standard Range
1D Laser scanner
Long Range
1D /2D
Standard Range
Imager (HD, DL,
SR)
1D /2D
Long Range
Imager
Windows Mobile 6.5 Classic
Keypads: See below
Keypad
The followingkeypads are available:
−28 key
−43 key
−53 key
−53 key with VT emulation print
−53 key with 3270 emulation print
−53 key with 5250 emulation print
You can find specific information about the keypads under Technical Data or in the
Motorola documentation.

- blank -

Contens Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
1Product Description............................................................................................................. 1
1.1 Definition..................................................................................................................... 1
1.2 Use............................................................................................................................. 2
2Technical Data...................................................................................................................... 3
2.1 Explosion Protection ATEX Zone 2/22........................................................................ 3
2.2 Explosion Protection UL Division 2............................................................................. 3
2.3 Characteristics............................................................................................................ 3
2.4 Performance Features................................................................................................ 4
2.5 User Environment....................................................................................................... 4
2.6 Application Development............................................................................................ 4
2.7 Voice and Data Transmission Wireless LAN.............................................................. 5
2.8 Voice and Data Transmission Wireless PAN.............................................................. 5
2.9 Options for Data Capture............................................................................................ 5
2.9.1SE1524-ER1D Long Range Scan Engine................................................... 6
2.9.2 SE4600 1D/2DLong Range Imager Engine................................................. 6
2.9.3 SE4500-SR 1D/2D Imager Engine............................................................... 6
2.9.4 SE4500-HD 1D/2D Imager Engine............................................................... 6
2.9.5 Decodable Bar Code Types.......................................................................... 7
2.10 Technical Data Battery............................................................................................... 8
2.11 Technical Data External Interface............................................................................... 8
2.12 Product Marking.......................................................................................................... 9
3Safety Instructions............................................................................................................. 11
3.1 Warnings about the Mobile Computers..................................................................... 11
3.2 Warnings for Battery................................................................................................. 12
3.3 Laser Devices........................................................................................................... 13
3.4 LED Devices............................................................................................................. 13
3.5 Health and Safety Recommendations...................................................................... 13
3.5.1 Ergonomic Recommendations.................................................................... 13
3.5.2 Installation in Vehicles................................................................................ 14
3.6 RF Exposure Guidelines........................................................................................... 15
3.6.1 International................................................................................................ 15
3.6.2 Europe........................................................................................................ 15
3.6.3 US and Canada.......................................................................................... 16
3.7 Warnings and Information about Wireless Devices.................................................. 16
3.8 Warnings about the Use of Wireless Devices........................................................... 18
3.8.1 Safety in Aircraft......................................................................................... 18
3.8.2 Safety in Hospitals...................................................................................... 19
3.8.3 Cardiac Pacemakers.................................................................................. 19
3.8.4 Hearing Aids............................................................................................... 19
3.8.5 Other Medical Instruments.......................................................................... 19
3.9 Bluetooth.................................................................................................................. 19
3.9.1 Products with Bluetooth® Wireless Technology......................................... 19

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… Contents
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
4Operation............................................................................................................................ 20
4.1 Getting started.......................................................................................................... 20
4.2 Recommendedposition for the MC9190ex-NI.......................................................... 20
4.3 Parts of the MC 9190ex-NI......................................................................................... 21
4.4 Battery...................................................................................................................... 21
4.4.1 Battery information...................................................................................... 22
4.4.2 Installing the Battery................................................................................... 22
4.4.3 Replacing a battery..................................................................................... 23
4.4.4 Charging the battery................................................................................... 24
4.5 Keypad..................................................................................................................... 28
4.5.1 Replacing Keypad....................................................................................... 28
4.6 Secure Device (SD) Card......................................................................................... 30
4.6.1 Installing a SD Card.................................................................................... 30
4.7 Screen Protector....................................................................................................... 31
4.7.1 Installing the Screen Protector.................................................................... 31
4.7.2 Removing the Screen Protector.................................................................. 32
4.8 Connection to the PC................................................................................................ 33
4.8.1 Active Sync................................................................................................. 33
4.8.2 DEVICE Center or mobile device center..................................................... 33
5Commissioning.................................................................................................................. 34
5.1.1 Display........................................................................................................ 34
6Software Versions.............................................................................................................. 35
6.1 AKU Version............................................................................................................. 35
6.2 OEM Version............................................................................................................ 35
6.3 BTExplorer Version................................................................................................... 35
6.4 Fusion Version.......................................................................................................... 35
7Trouble shooting................................................................................................................ 36
7.1 Battery Management................................................................................................ 36
7.1.1 Changing the Power Settings..................................................................... 36
7.1.2 Changing the Backlight Settings................................................................. 37
7.1.3 Changing the Keypad Backlight Settings.................................................... 37
7.1.4 Changing the settings for the display backlight........................................... 37
7.1.5 Turning Off the Radios................................................................................ 38
7.1.6 On Devices with Mobile 6.5........................................................................ 38
7.2 Resetting the MC 9190ex-NI...................................................................................... 39
7.2.1 On a WindowsMobile 6.5 device ............................................................... 39
7.2.2 Warm boot.................................................................................................. 39
7.2.3 Cold Boot.................................................................................................... 39
7.2.4 Clean Boot.................................................................................................. 40

Contens Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
8Maintenance, Inspection, Repair...................................................................................... 41
8.1 Servicing................................................................................................................... 42
8.2 Inspection................................................................................................................. 42
8.3 Cleaning................................................................................................................... 42
8.3.1 Required materials...................................................................................... 43
8.3.2 Housing...................................................................................................... 43
8.3.3 Display........................................................................................................ 43
8.3.4 Scan window.............................................................................................. 44
8.3.5 Interface connection ................................................................................... 44
8.3.6 Cradle/Battery contacts.............................................................................. 44
8.3.7 Cleaning interval......................................................................................... 45
8.4 Information about Repairs........................................................................................ 46
9Accessories........................................................................................................................ 47
9.1 Accessories for use in hazardous area..................................................................... 47
9.2 Accessories for use in non hazardous area.............................................................. 48
10 Order Numbers................................................................................................................... 49
10.1 MC 9190ex-NI............................................................................................................ 49
11 Disposal.............................................................................................................................. 49
12 Dispatch and Packaging Instructions.............................................................................. 49
13 Additional Information....................................................................................................... 50
13.1 Links......................................................................................................................... 50
Appendix – Declaration of Conformity
Certificate of Compliance

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… Product Description
Technical data subject to change without notice.
Issue: Revision 2 / August 2012 Page 1 of 50
1Product Description
1.1 Definition
The MC 9190ex-NI Mobile Computer is a compact unit for high-standard barcode scanning
in hazardous (potentially explosive)areas.
−ATEX Zone 2 and 22
or
−Class I, II, III Division 2
This means that even in the hazardous area the user can avail of the extensive
communicationoptions that are already standard in other areas.
Its ergonomic design and easy operation make it an ideal support for fast data availability
in enterprise processes. A keyboard is available in different versions for manual data
capture.
The integrated 1D or 1D/2D scan engine for capturing bar codes is available as another
data capture option. The ergonomically mounted scan triggers on the MC 9190ex-NI allow
data to be captured easily in one-hand operation.
Several technologies are available for data communication with other systems and
company divisions.
−Wireless LAN (WLAN),
−Wireless PAN(WPAN) (Bluetooth)
These modules, which are integrated in the device, allow seamless transmission of voice
and data with easy integration into thecompany’s network.

Product Description Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Page 2 of 50 Technical data subject to change without notice.
Issue: Revision 2 / August 2012
Other advantages in its use are the rugged construction, easy-to-read 3.7" VGA colour
display with touch technology and high-performance lithium ion battery.
Fast process execution is ensured by the Marvell PXA320@ processor with 806 MHz,
which is integrated in the MC 9190ex-NI, and an easy development of applications is
facilitated by the Microsoft® Windows Mobile® 6.5 operating system in conjunction with
the Enterprise Mobility Developer Kits (EMDK) from Motorola.
256 MB RAM and 1 GB flash drive integrated in the device are available for storing user-
defined applications and data. For larger applications and volumes of data, BARTEC
offers SD memory cards.
1.2 Use
The Mobile Computer MC 9190ex-NI is a hand-guided piece of electric equipment. It
serves the mobile capture, processing and wireless transmission of data in hazardous
areas.
It is used exclusively in combination with operating deviceswhich satisfy the requirements
for overvoltage category I.
The MC 9190ex-NI, type B7-A282-…./…….. series has been modified for use in the
hazardous area of:
−UL Class I Division 2 Groups A, B, Cand D
−UL Class II Division 2, Groups F and G
−UL Class III
−Non hazardous area
The MC 9190ex-NI, type B7-A283-…./…….. series has been modified for use in the
hazardous area of:
−ATEX Zone 2
−ATEX Zone 22
−Non hazardous area
The MC 9190ex-NI may not beused in locations of:
−ATEX Zone 0
−ATEX Zone 1 andZone 21
−UL Class I,II Division 1
−UL Class I,II Division 1
−UL Class II Division 2, Groups E

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… Technical Data
Technical data subject to change without notice.
Issue: Revision 2 / August 2012 Page 3 of 50
2Technical Data
2.1 Explosion Protection ATEX Zone 2/22
Type B7-A283-…./……..
Ex protection II 3G Ex nA IICT6
II 3D Ex tD A22 IP54 T80 °C
Ambient temperature -20 °C ≤ Ta ≤ +50 °C
Temperature Code T6
Certification B1-A283-7C0001
2.2 Explosion Protection UL Division 2
Type B7-A282-…./……..
Ex protection type Class I Division 2 Groups A, B, C and D
Class II Division 2 Groups F and G
Class III
Ambient temperature -20 °C ≤ Ta ≤ +50 °C
Temperature Code T6
Certification UL File E321557
2.3 Characteristics
Dimensions (height x width x depth) approx. 23.1 cm x 9.1 cm x 19.3 cm
approx. 9.1 inch x 3.6 inch x 7.6 inch
Weight including battery approx. 710 g approx. 25 oz
depending onthe version and configuration
Display Transflective 3.7 inch colour
Windows Mobile: VGA
Touchscreen Glass analog resistive touchscreen
Network connections High-speed USB client, full-speed USB host,
Ethernet (via cradle), Bluetooth
Interfaces RS232, USB
Keyboard variants 28 key, 43 key, 53 key,
53 key with VT emulation print,
53 key with 3270 emulation print,
53 key with 5250 emulation print

Technical Data Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Page 4 of 50 Technical data subject to change without notice.
Issue: Revision 2 / August 2012
Note
No emulation software is installed on the Mobile Computers with the emulation key
version. The customer must order the emulation software separately from
Symbol/Motorola and its distributors and install it himself.
The devices are modified to suit the selected keypad version. The end user can replace
the keypad later himself.
When replacing the keyboard, follow theinstructions in chapter 4.5 “Keypad".
2.4 Performance Features
Processor Marvell PXA320@processor with 806 MHz
Memory 256 MB RAM / 1GB Flash
Expansion slot SD card slot
Optional available extension with
Micro SD card 1 GB Order no. 17-28BE-F006/0002 2 GB Order no. 17-28BE-F006/0003
4 GB Order no. 17-28BE-F006/0004
8 GB Order no. 17-28BE-F006/0005
16 GB Order no. 17-28BE-F006/0006
Note:
The devices aremodified to suit theselected
memory versions. The end user can replace
the SD card later himself, but must follow the
instructions in chapter 4.6 “Secure Device
(SD) Card".
Operating system Windows Mobile 6.5
2.5 User Environment
Ambient temperature -20 °C to +50 °C -4 °F to 122 °F
Ambient temperature when charging 0 °C to +40 °C 32 °F to 104 °F
Storage temperature (without battery) -40 °C to +70 °C -40 °F to 158 °F
outside the hazardous area
Air humidity 5% to 95% (non-condensing)
Protection class (EN 60529) IP 64
2.6 Application Development
PSDK (Platform Software Developer Kit) and EMDK (Enterprise Mobility Developer Kit)
available through Motorola Support Central Web site.
Available for −C
−Java
−.Net

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… Technical Data
Technical data subject to change without notice.
Issue: Revision 2 / August 2012 Page 5 of 50
More tools are available from
Motorola for the devices
e.g.
−Rem Capture forprocessing registry files.
−
Application Launcher for dividing
applications into categories and access
regulation to the individual applications or
operating system.
−
Data Wedge allows data reading by
applications that do not supp
ort any
scanner.
−App Center is an end-
user application
access control engine that restricts activity
to a set of authorized applications on
mobile devices.
2.7 Voice and Data Transmission Wireless LAN
WLAN (integrated radio module)
Wireless standard Tri Mode IEEE 802.11a/b/g
Output power 100mW U.S. and International
Data rate IEEE802.11a: up to 54 Mbit/sec.
IEEE802.11b: up to 11 Mbit/sec.
IEEE802.11g: up to 54 Mbit/sec.
Frequency range
(country-dependent) IEEE802.11a: 5 GHz
IEEE802.11b: 2.4 GHz
IEEE802.11g: 2.4 GHz
Safety WPA2 Enterprise, 802.1x; EAP-TLS; TTLS
(CHAP, MS-CHAP, MS-CHAPv2, PAP or
MD5); PEAP (TLS, MSCHAPv2, EAP-GTC);
LEAP, EAP-FAST (TLS, MS-CHAPv2, EAP-
GTC), WPA2/AES, CCX v4, FIPS 140-2 and
IPv6 _
Antenna integrated in the device
2.8 Voice and Data Transmission Wireless PAN
Bluetooth Bluetooth Version 2.1 with EDR
Antenna Integratedin the device
2.9 Options for Data Capture
Five different types of scan engines SE1524-ER
SE4600
SE4500-SR
SE4500-HD

Technical Data Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Page 6 of 50 Technical data subject to change without notice.
Issue: Revision 2 / August 2012
Note
For decode zone and more
detailed information of the scan engine look into the
Integrator Guide of Motorola.
2.9.1 SE1524-ER 1D Long Range Scan Engine
Reading range up to approx. 13.7 m
up to approx. 45 feet
2.9.2 SE4600 1D/2D Long Range Imager Engine
Extended range omni directional 1D/2D imaging engine reads 1D and 2Dsymbols as
close as 8 in./20.32 cm and as far as 30 ft./9.14 m
Reading range close up to approx. 20.3 cm
up to approx. 8 inch
Reading range far up to approx. 9.1 m
up to approx. 30 feet
2.9.3 SE4500-SR 1D/2D Imager Engine
Omni directional 1D/2D imaging engine reads 1D and 2D symbols
Reading range close up to approx. 5.3 cm
up to approx. 2.1 inch
Reading range far up to approx. 62.7 cm
up to approx. 24.7 inch
2.9.4 SE4500-HD 1D/2D Imager Engine
1D/2D DPM imaging engine reads a wide varietyof DPM marks on metal, plastic and
glass surfaces, including: dot peening, laser etching, molding, stamping or casting.
Reading range close up to approx. 4.0 cm
up to approx. 1.6 inch
Reading range far up to approx. 28.2 cm
up to approx. 11.1 inch

Mobile Computer MC 9190ex-NI
Type B7-A28.-………… Technical Data
Technical data subject to change without notice.
Issue: Revision 2 / August 2012 Page 7 of 50
2.9.5 Decodable Bar Code Types
Laser Decode Capability MC 9190ex-NI with
SE1524-ER 1D Long Range Scan Engine
1D code
Code 39 Code 128 Code 93
Codabar
Code 11
Discrete 2 of 5
Interleaved 2 of 5
EAN-8
EAN-13
MSI
UPCA
UPCE
UPC/EAN supplementals
Coupon code
Trioptic 39
Web code
Chinese 2 of 5
RSS-14
RSS-Limited
RSS-Expanded
Imaging Decode Capability MC 9190ex-NI with
SE4500 1D/2D Imager Engine
SE4600 1D/2DLong Range Imager Engine
1D Codes
Code 39
Code 128
Code 93
Codabar
Code 11
Discrete 2 of 5
Interleaved 2 of 5
EAN-8
EAN-13
MSI
UPCA
UPCE
UPC/EAN supplementals
Coupon code
Trioptic 39
Web code
Chinese 2 of 5
RSS-14
RSS-Limited
RSS-Expanded
2D Codes
TLC39
Composite AB
Composite C
Micro PDF-417
Macro PDF-417
(Macro) Micro PDF-417
QR Code
Data Matrix
microQR
Maxi Code
PDF-417
Dutch Kix
US Postnet
US Planet
UK 4-state
Australian 4-state
Canadian 4-state
Japanese 4-state
USPS 4-state (US4CB) Aztec

Technical Data Mobile Computer MC 9190ex-NI
Type B7-A28.-…………
Page 8 of 50 Technical data subject to change without notice.
Issue: Revision 2 / August 2012
2.10 Technical Data Battery
Caution! The battery may only be charged and changed outside the hazardous area!
Battery type B7-A2Z0-0006 Lithium ions 7.4 V/2200 mAh
Operating temperature
−during charging
−during discharging
0 °C to +40 °C 32 °F to 104 °F
-20 °C to +50 °C -4 °F to 122 °F
Storage temperatures
−≤ 1 year
−≤ 3 months
−≤ 1 months
-25 °C to +20 °C -13 °F to 68 °F
-25 °C to +45 °C -13 °F to 113°F
-25 °C to +60 °C -13 °F to 140 °F
Relative air humidity 20 % - 85 % (non-condensing)
Backup battery Ni-MH battery 3.6 V/15 mAh, rechargeable
Integrated in the device and replaceable only
in the factory.
2.11 Technical Data External Interface
Caution!
Operating of the 17-
pin data interface is only permissible outside the hazardous area
and only with devices specified by themanufacturer!
Operating of the headset port is only permissible outside the hazardous area and only
with devices specified by the manufacturer!
Pin Outs Interface Connector
PIN Signal Name Description PIN Signal Name Description
1
USB_GND
USB
10
Cradle_DET
Grounded by
cradle when in
cradle
2
USB_D_Plus
USB
11
DTR
RS232C
3
TxD
RS232C
12
Not assigned
Not assigned
4
RxD
RS232C
13
Power_IN
12 V / 2.5 A max.
5
DCD
RS232C
14
CTS
RS232C
6 RTS RS232C 15 USB_5V_DET USB
7 DSR RS232C 16 USB_D_Minus USB
8 GND earth, 2.5 A max. 17 EXT_Power_OUT 3.3 V @ 500 mA
9
RI
RS232C