Bartscher 1500/17 User guide

1500/17 - 3000/25
110431 - 110432

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Technical Support Hotline: [phone]
www.bartscher.com
Version: 2.0
Date of preparation: 2022-04-19
EN
2

110431 1 / 26
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of Signal Words....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended Use ...........................................................................................5
1.4 Unintended Use.......................................................................................5
2General information.......................................................................................6
2.1 Liability and Warranty ..............................................................................6
2.2 Copyright Protection ................................................................................6
2.3 Declaration of Conformity ........................................................................6
3Transport, Packaging and Storage................................................................7
3.1 Delivery Check.........................................................................................7
3.2 Packaging................................................................................................7
3.3 Storage....................................................................................................7
4Technical Data...............................................................................................8
4.1 Technical Specifications ..........................................................................8
4.2 Functions of the Appliance.......................................................................9
4.3 List of Components of the Appliance .....................................................10
5Installation and operation ............................................................................12
5.1 Installation..............................................................................................12
5.2 Operation...............................................................................................14
6Cleaning ......................................................................................................21
6.1 Safety Instructions for Cleaning.............................................................21
6.2 Cleaning.................................................................................................21
7Possible Malfunctions..................................................................................23
8Disposal....................................................................................................... 26

Safety
2 / 26 110431
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des Geräts u ndg ilt als wichtige Infor mationsquelle un dN achschlagewer k.Di e Kenntnis aller enthalt enenSic herheitshinw eiseu ndH andlungs anweisungen schafft die V oraussetzung für das sichere un ds achgerechte Arbeite n mit dem Gerät. Darüber hi naus müssen die für de nEins atzbereich des Geräts gelt enden örtlich enU nfallverhütungs vorschriften und allge meinen Sicherheits bestimmungen eing ehalten werden. Diese Be dienungsanleitung is t Bestandt eild es Produkts und muss i n unmittelbarer Nähe d es Geräts für das In¬stall ations-, Bedienungs- , Wartungs- und Reinigu ngspersonal jederzeit z ugänglich auf¬b ewahrt werden. Wenn d as Gerät an eine dritte Person
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.

Safety
110431 3 / 26
EN
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical Current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.
•Always completely unwind the power cord.
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.

Safety
4 / 26 110431
EN
•Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Supervised Usage only
•Only supervised appliance may be used.
•Always remain in an immediate vicinity of the appliance.
Operating Personnel
•The appliance may only be operated by qualified personnel and trained
specialist personnel.
•This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
•Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper Use
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.
•The appliance may only be used when all connections are executed according
to rules of law in force.
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your own.
•Do not introduce any changes in the appliance nor modify it.

Safety
110431 5 / 26
EN
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–Drying and polishing of washed stainless steel and silver cutlery.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.

General information
6 / 26 110431
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, Packaging and Storage
110431 7 / 26
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical Data
8 / 26 110431
EN
4 Technical Data
4.1 Technical Specifications
Name:
Cutlery polishing machine
1500/17
Art. No.:
110431
Material:
stainless steel
Quantity of maize granulate, in kg:
1,7
Cutlery input opening width, in mm:
215
Cutlery output opening width, in mm:
100
Maximum output, number of cutlery pieces /
hour:
1500
Connected load:
0,4 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
510 x 480 x 3650
Weight, in kg:
25,6
We reserve the right to implement technical modifications.
Name:
Cutlery polishing machine
3000/25
Art. No.:
110432
Material:
stainless steel
Quantity of maize granulate, in kg:
2,5
Cutlery input opening width, in mm:
230
Cutlery output opening width, in mm:
130
Maximum output, number of cutlery pieces /
hour:
3000
Connected load:
0,56 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
580 x 560 x 410
Weight, in kg:
40,0
We reserve the right to implement technical modifications.

Technical Data
110431 9 / 26
EN
Version / Characteristics 110431-110432
•Polishing/drying method: heated maize granulate
•Fan for granulate removal
•UV lamp for cutlery disinfection
•ON/OFF switch
•Indicator lights:
–temperature
–heating-up
–ready for operation
–warning
•Features:
–Start/Stop key
–HACCP conformity due to operating temperature of 80°C
–Appliance dries the granulate for 10 minutes more after switching off
–Automatic switching off when the cover is opened
–Easy access to the cutlery channel
The 110431 set includes:
–1 cutlery collection basket
–2 kg of maize granulate
The 110432 set includes:
–1 cutlery collection basket
–1 cutlery collection sieve
–3 kg of maize granulate
4.2 Functions of the Appliance
The cutlery polishing machine makes it possible to polish to high shine up to 1,500
or 3,000 cutlery pieces per hour. Cutlery pieces are hygienically disinfected owing
to the integrated UV lamp and the HACCP compliant operating temperature.

Technical Data
10 / 26 110431
EN
4.3 List of Components of the Appliance
Cutlery polishing machine 110431
Fig. 1
1. Housing
2. Cutlery input opening
3. Feet (4 pcs)
4. Control panel
5. Cutlery output opening
6. Cutlery collection basket
7. Maize granulate

Technical Data
110431 11 / 26
EN
Cutlery polishing machine 110432
Fig. 2
1. Housing
2. Cutlery input opening
3. Feet (4 pcs)
4. Control panel
5. Cutlery output opening
6. Cutlery collection sieve
7. Cutlery collection basket
8. Maize granulate

Installation and operation
12 / 26 110431
EN
5 Installation and operation
5.1 Installation
Unpacking / Positioning
•Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•Never place the appliance in humid or wet environment.
•Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no
problems;
–easily accessible;
–well ventilated.
•Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•Leave at least 20 cm clearance from flammable walls and items.

Installation and operation
110431 13 / 26
EN
Transport Protection Removal
CAUTION!
If the transport protection is not removed or if it is not fully removed,
this may lead to the appliance being damaged.
Before starting the appliance, remove entire transport protection.
Keep all elements for re-use if the appliance is to be transported again or
moved to another location.
In order to remove the transport protection, proceed in the following way:
–lift the cover of the appliance,
–undo the fastening knob (A) and remove
the cover (B) (Fig. 3),
–remove fastening rods (C),
–before using the appliance make sure you
re-fit the cover (B) for closing the drying
bowl,
–before starting the appliance make sure
you re-fit the cover.
–re-fitt hec over (B) and tighten it sec urely with the fastening knob( A).
Fig. 3
Power supply connection
•Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.

Installation and operation
14 / 26 110431
EN
5.2 Operation
Appliance Preparation
1. Before use, clean the appliance and accessories thoroughly, following
indications in section 6 'Cleaning and Maintenance'.
2. To end with, dry the appliance and accessories thoroughly.
Operating Elements / LED Indicator Lights
Fig. 4
No.
Symbol
Description
1
Fuse
Overvoltage protection.
2
ON/OFF switch
For switching the appliance on and off.
This switch should always be on during operation of
the appliance; for the purpose of switching the
appliance on and off, use the START / END key (3).

Installation and operation
110431 15 / 26
EN
No.
Symbol
Description
3
START / END key
The appliance is switched on by pressing this key.
By pressing this key during the operation, the appliance
is being switched off; the maize granulate is dried for
approx. 10 minutes before the appliance is switched off.
4
UV lamp LED indicator light
When the appliance is switched on, it indicates that the
UV lamp is working.
Flashing light indicates lamp malfunction.
5
'Power' / 'Cycle Switch-Off' LED indicator light
When the appliance is switched on, it indicates that the
power is supplied to the appliance.
Flashing light indicates that the maize granulate drying
cycle is in progress; next, it goes off (after approx. 10
minutes).
6
'Operating Temperature Reached' LED indicator light
When the appliance is switched on, it indicates that the
maize granulate has an optimum operating temperature.
Flashing light indicates that the maize granulate is being
heated up.
7
'Heating' LED indicator light
When the appliance is switched on, it indicates that
maize granulate is being heated up.
When the appliance is switched off, it indicates that the
maize granulate has an optimum operating temperature.
8
'ALARM 1' LED indicator light
See table in section 7 'Possible Malfunctions'
9
'ALARM 2' LED indicator light
See table in section 7 'Possible Malfunctions'

Installation and operation
16 / 26 110431
EN
Operation Description
Switch-On Phase
1. Plug the appliance into a suitable single socket.
2. Press the ON/OFF switch (2) to switch the appliance on.
The cutlery polishing machine is ready for operation.
3. Press the 'START' key (3) to start the appliance.
Drying Cycle
1. Wait for the appliance to reach the operating temperature.
The 'Operating Temperature Reached' LED indicator light (6) will light up
concurrently with the 'Heating' LED indicator light (7).
2. Operate the appliance as described in section 'Loading the Cutlery Polishing
Machine'.
Switch-Off Phase
1. After using the appliance, press the END key (3) to start the appliance’s switch-
off phase.
The appliance is switched off after approx. 10 minutes, whereas 'Power' / 'Cycle
Switch-Off' LED indicator light (5) is flashing.
When this time elapses the appliance stops and the 'Power' / 'Cycle Switch-Off'
LED indicator light (5) remains on in continuous mode for the remaining duration of
the drying cycle.
The switch-off phase is necessary to allow for full drying of the maize granulate.
Loading Appliance with Maize Granulate
1. Switch the appliance on by pressing the ON/OFF switch (2) and then press the
START key (3).
2. Slowly fill the cutlery input opening to the right side or at the top with appropriate
maize granulate.
NOTE!
Always add the exact quantity of the maize granulate, as presented in the
'Technical Data' table for a given appliance.

Installation and operation
110431 17 / 26
EN
CAUTION!
Never leave the cutlery polishing machine on if the drier's drum has not
been filled with the maize granulate to avoid overheating and damaging
the housing of the drier's drum.
Loading the Cutlery Polishing Machine
1. Switch the appliance on by pressing the ON/OFF switch (2).
2. Press the 'START' key (3) to start the appliance.
3. Before you put the cutlery in the cutlery input opening wait for the 'Heating' LED
indicator light (7) to light up.
CAUTION!
Load the appliance with properly cleaned cutlery (no fat or oil residues)
only, to avoid damaging the surface of the drier’s drum.
4. Place the supplied cutlery collection basket (Art. No.110431, Fig. 7) or cutlery
collection sieve (Art. No. 110432, Fig. 8) under the cutlery output opening.
5. Place the cutlery for drying into the cutlery input opening at the side (Art. No.
110431, Fig. 5) or on the top (Art. No. 110432, Fig. 6)
NOTE!
Load the cutlery to the cutlery input opening adding them gradually to
avoid mixing them up.
Fig. 5
Fig. 6

Installation and operation
18 / 26 110431
EN
Cutlery Drying / Cutlery Output
Cutlery goes into the drier’s drum with the maize granulate and is dried there (Fig.
10).
Fig. 7
Fig. 8
After the drying phase, cutlery leaves the cutlery polishing machine through the
cutlery output opening and go to the cutlery collection basket (Fig. 7) or to the
cutlery collection sieve with the cutlery collection basket (Fig. 8).
In the upper area of the cutlery output
opening there is a blower which prevents
the granulate from leaving the appliance
with cutlery.
Moreover, the UV lamp installed there
disinfects cutlery (Fig. 9).
Fig. 9