Bartscher AGN1000-1/1 User manual

AGN1000-1/1
300186

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Service hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2022-12-22
Original instruction manual
EN

300186 3 / 8
EN
Technical Specifications
Name:
Gastronorm trolley AGN1000-1/1
Art. No.:
300186
Material:
stainless steel
Number of guide rail pairs:
10
Distance between guide rail pairs, in
mm:
120
Load-bearing capacity per guide rail
pair, max. in kg:
10
Dimensions of utility surface (W x D), in
mm:
480 x 540
Load-bearing capacity of utility surface,
max. in kg:
10
Total load-bearing capacity, max. in kg:
80
Number of swivel casters:
4
Locking swivel casters:
2
Diameter of casters, in mm:
100
Number of caster dampers:
4
Material of caster dampers:
plastic
Dimensions (W x D x H), in mm:
580 x 685 x 1840
Weight, in kg:
28
We reserve the right to implement technical modifications.
Version / Characteristics
•Version: GN guides
•Area of application: clearing
•May be loaded from both sides
•Utility surface
•Delivery condition: Self-building kit, easy assembly
•The set does not include:
–GN containers
–sheets
–grates
<Endergebnis>

4 / 8 300186
EN
Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–Clearing and transporting food in GN containers, on grates and trays up
to GN 1/1 size.
–Storage of dishes in suitable containers.
Scope of Delivery / Part Name
•Unpack the Gastronorm trolley and remove the packing material pursuant to
environmental regulations.
•Check completeness of delivery according to the list below:
Component
Number
Name
2
Lateral section with 10 preinstalled
guide rails and a lateral wall
1
Display area
2
Lateral railing
2
Front and rear railings
2
Crossbar

300186 5 / 8
EN
1
Allen wrench
8
M8*55 bolt
4
Square washer
4
Damper for swivel caster
2
Locking swivel caster
2
Non-locking swivel caster
4
M5*10 bolt (already fixed in a factory to
lateral sections)
8
M5 nut
4
M8 round washer

6 / 8 300186
EN
Assembly
1. Fix the 2 shorter railing grilles at the front
and rear of the working surface. Use the
enclosed M5 nuts and washers.
2. Hook the 2 longer railing grilles onto the
pins of the grille at the front and rear.
Fig. 1
3. Assemble 2 crossbars (at the bottom) to
the lateral section of the Gastronorm
trolley.
4. Place the square washer on the outside of
each lateral section. Screw crossbars
together with square washers using M8x10
bolts and tighten them with Allen key.
5. Connect crossbars (at the bottom) with the
second lateral section, using washers and
nuts, as described above.
Fig. 2

300186 7 / 8
EN
6. Place the Gastronorm trolley on its side.
7. Mount 4 swivel caster dampers onto square
tubing of lateral sections.
8. Finally, screw swivel casters into square tubing
of lateral sections.
9. Set the Gastronorm trolley on swivel casters.
10.Insert folded shelves with railing (point 1, 2) on
the Gastronorm trolley frame.
11.Screw the shelf with railing to the Gastronorm
trolley frame using M8 bolts with M8 round
washers and tighten them with Allen key.
Fig. 3
Setting
1. Check the stability of the Gastronorm
trolley.
2. Level the Gastronorm trolley through
screwing in and out swivel casters.
3. After setting the Gastronorm trolley in a
designated place, lock 2 swivel casters with
lockings to prevent accidental relocation or
overturn of the Gastronorm trolley.
Fig. 4

8 / 8 300186
EN
Gastronorm Trolley Loading
Prevents falling down
The Gastronorm trolley can be loaded from both
sides.
1. Place the required number of suitable trays,
GN containers, etc. in guides.
2. Place jugs, cups, glasses, etc. on the top
shelf.
The shelf railings prevent dishware from falling
down.
Fig. 5
Cleaning
ATTENTION!
Scrubbing agents, washing agents with solvents or caustic substances
may damage the surface.
For cleaning, use only agents suitable for stainless steel.
1. Clean the Gastronorm trolley regularly with warm water and a soft, damp cloth.
Use a mild cleaning agent if required.
2. Dry the Gastronorm trolley with a soft cloth.