Bauhn APPS-0723 User manual

User Manual
MODEL: APPS-0723
Portable
Party Speaker
AFTER SALES SUPPORT
1300 002 534
tempo.org/support
MODEL: APPS-0723 PRODUCT CODE: 712896 07/2023
AUS

2
Welcome
Congratulations on your purchase!
This manual tells you all you need to know about using your new BAUHN®product.
Please take special note of any important safety and usage information presented with the symbol.
All products brought to you by BAUHN®are manufactured to the highest standards of performance and safety and,
as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.
Domestic use only: This product is intended for indoor domestic use only. Do not use this product for anything other
than its intended purpose, and only use it as described in this manual.
We hope you will enjoy using your purchase for many years to come.

3
Contents
Welcome 2
Unpack and Prepare 4
Product Overview 5
Remote Control 7
Wireless Microphone 9
Operation 10
Troubleshooting 14
Specications 16
Compliance and Responsible Disposal 17
Warranty Information 18
Repair and Refurbished Goods or Parts Notice 19

4 | UNPACK AND PREPARE
Unpack and Prepare
What's in the box
Before setting up your new product, check you have everything:
A. Portable Party Speaker
B. Remote Control
C. AAA Activ Energy Batteries (2)
D. Wireless Microphone
E. AA Activ Energy Batteries (2)
F. AC-DC Power Adaptor
G. Warranty Certificate
H. General Safety Warnings
I. User Manual
F
G H
I

PRODUCT OVERVIEW | 5
Product Overview
Speaker Overview
Back Panel
LED display screen &
Remote sensor
Tweeter
FM antenna (back of speaker)
Woofers
DC Input: connect the supplied AC-DC
power adaptor to an external power
supply to power the speaker.
See the next page for the
control panel buttons
Control Panel
(see next page)
DCINPUT
15V 2.4A

6 | PRODUCT OVERVIEW
TL-2802 top panel
nameplate size: 20x20mm
2cm
2cm
TF USB AUX
GUITAR IN MIC 1 MIC 2
MIC VOLUME
ECHO GT TREBLE BASS
VOLUME
MODE
REC REPEAT/E
LIGHT
POWER
+ + ++
ECHO GT TREBLE BASS
- - --
Control Panel
1 2 3 4 5 76
8
9
10
11
12
13 14 15 16 17 18 19
20
21
22
23
24
1 Micro SD (TF) Card Slot : insert Micro SD/TF card (not
included) for music playback
2 USB Slot: insert your USB (not included) for music playback
3 AUX In Port
4 GUITAR IN: input for guitar (not included)
5 MIC 1/MIC 2: input for wired microphones (not included)
6 Charging LED indicator: indicates charging status
7 POWER: press to turn speaker on/off
8 GT + : increase guitar volume level
9 ECHO+ : increase microphone echo volume level
10 MIC VOLUME control knob : use to adjust microphone
volume level. The LED lights on the knob will ash
11 ECHO- : decrease microphone echo volume level
12 GT- : decrease guitar volume level
13 MODE: press to switch between different input modes.
Press and hold to enter/exit microphone priority mode
14 REC: to record and playback voice recordings to USB/
TF card
15 : play previous song
16 : play/pause song
17 : play next song
18 REPEAT/EQ : press to change repeat mode when in
USB/Micro SD card mode. Press and hold to switch
between EQ sound modes
19 LIGHT : press to change the speaker light effect. Press
repeatedly to change between light effects. Press and
hold to turn light effect off
20 TREBLE- : decrease treble level
21 BASS- : decrease bass level
22 VOLUME control knob : use to adjust volume level.
The LED lights on the knob will ash
23 BASS+ : increase bass level
24 TREBLE+ : increase treble level

REMOTE CONTROL | 7
Precautions When Using Batteries
• Do not use old and new batteries together.
• Do not use different types of batteries (e.g.
Manganese and Alkaline batteries) together.
• Remove the batteries from the remote if you do not
intend to use it for a long time.
• When discarding used batteries, follow any
guidelines for recycling and disposal of batteries
that apply in your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to
extreme heat.
Remote Control
Setup
Insert the supplied AAA Activ Energy Batteries according to
the polarity markings (+ / -) inside the compartment. Make
sure the batteries are correctly aligned and properly pushed
into place.
2
3
1
AAA size
batteries
included

8 | REMOTE CONTROL
Remote Overview
MI
MUTE : mute the sound. Press again to
unmute
: play next song
VOL- : decrease volume level
EQ : change EQ mode
NUMBER BUTTONS : Numerical input to
directly play a track.
: press to enter standby mode
MODE : press to switch between input
modes. Press and hold to enter/exit
microphone priority mode
LED : press to change the speaker light
effect. Press repeatedly to change between
light effects. Press and hold to turn light
effect off
VOL+ : increase volume level
: play previous song
: play/pause song
REPE : press to change repeat mode when
in USB/Micro SD card mode

WIRELESS MICROPHONE | 9
Wireless Microphone
1 Battery indicator (red LED when mic is on)
2 On/Off switch
3 Battery cover (twist to open)
Precautions When Using Batteries
• Do not use old and new batteries together.
• Do not use different types of batteries (e.g.
Manganese and Alkaline batteries) together.
• Remove the batteries from the microphone if you
do not intend to use it for a long time.
• When discarding used batteries, follow any
guidelines for recycling and disposal of batteries
that apply in your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to
extreme heat.
Setup
Insert the supplied AA Activ
Energy Batteries according to
the polarity markings (+ / -)
inside the compartment. Make
sure the batteries are correctly
aligned and properly pushed
into place.
2
1
AA size
batteries
included
3

10 | OPERATION
Operation
Charging and Power on
• Charging: plug in the supplied AC power adaptor to the DC IN port (located back of speaker) to charge the speaker for 8 hours
before use. During charging, the battery icon on the LED display screen will display the remaining battery capacity and the
charging LED indicator will light up red. Please disconnect and unplug the power adaptor after charging.
• Power on: press the POWER switch on the speaker to turn the speaker on.
Control Panel Operations
• Use the / buttons on the speaker or the remote control to navigate between songs/FM stations.
• Use the VOLUME control knob on the speaker or the VOL- / VOL+ buttons on the remote control to adjust the volume.
• Use the MODE button to switch between the input modes. The LED display screen will show the current input mode. Press and
hold to enter/exit microphone priority mode.
Battery Status
• You can view the battery status of the speaker on the LED display screen. When the battery is low, a voice notication will be
heard. Please plug in the supplied AC power adaptor to charge the speaker.
LED Light
• The speakers have LED lights across the front of the speaker. Press the LIGHT button on the speaker or LED button on the
remote control repeatedly to switch between the different light effects. Press and hold the button to turn the light effect on/off.
(Note: when on FM mode, the LED light may generate interference when the FM signal is weak, please switch off the LED light
if interference occurs).