BCP SKY5671 User manual

SKY5671
INSTRUCTION
MANUAL
Upholstered Adjustable
Queen Bed Base
Ver. 3

2|
As shoppers, we’re always trying
to find the perfect balance between
quality & value. At BCP, we believe
we’ve achieved that. Our diverse
catalog of everyday essentials is
tailored especially to our customers
& guaranteed to hit that sweet
spot of high quality & low price.
Always.

| 3
PARTS
6 PCS
LEG
A
1 PC
POWER CORD
B
1 PC
POWER SUPPLY
C
2 AAA BATTERIES
(FOR REMOTE)
+AAA -
TOOLS REQUIRED
UP TO 20 MIN.
ASSEMBLY
2 PERSON
ASSEMBLY
NOTICE
•This item is intended for indoor, household use only.
•Ensure that your voltage is consistent with specifications.
•Do not modify the plug in any way.
•This item is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the item by a person responsible for their safety.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
• Do not use this item if your physician or healthcare professional has advised against massager use.
• If you experience any pain, illness, or discomfort during use, discontinue using this item and consult
with a physician.
• This product features electrical components. Do not expose to high temperatures or humidity.
• Keep item away from direct sunlight and other heat sources (stove, heater, etc.).
• Do not spill water on the electrical components or connectors.
• Do not touch the plug or operate with wet hands.
• Do not unplug by pulling on the power cord. Always grasp the plug firmly and pull straight out from
the outlet.
• Do not use if the plug or any components are damaged.
WARNING
Please retain these instructions for future reference.
850 LBS
CAPACITY
LBS

PRODUCT ASSEMBLY
1Remove all packaging and parts from the underside of the bed.
Screw six part A legs into the leg bases.
4|
PARTS
1 PC
RETAINER BAR
D
1 PC
REMOTE
E
A
x6

3With the help of another person, carefully flip the bed onto its legs. Insert the part D retainer
bar into the slots.
Plug the power cord into a wall outlet.
PRODUCT ASSEMBLY
2Insert the part B power cord into the part C power supply, then join the power supply to the
corresponding connector under the bed.
| 5
C
D
B

6 |
1. Control box
2. Head motor2. Head motor
3. Head massage motor
5. Foot massage motor
6. LED lights
7. Leg base 11. USB ports
9. Power supply
10. Pairing button
4. Foot motor 8. Power cord
DIAGRAM
1
6
89
10
11
7
4
2
5
3

| 7
ADJUST FOOT
CONTROL PANEL
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
TV PRESET POSITION
ADJUST HEAD
FOOT MASSAGE
HEAD MASSAGE
TIMER
MEMORY PROGRAMMABLE
BUTTONS
ZERO G PRESET POSITION
FLAT POSITION
10/20/30 MINUTE TIMER
INDICATORS
MODE
LIFT HEAD/FOOT
LOWER HEAD/FOOT
FLASHLIGHT
LEDS
LOUNGE PRESET
POSITON
• HEAD MASSAGE: Cycle through 3 intensity levels
• FOOT MASSAGE: Cycle through 3 intensity levels
• LEDS: Toggle under bed LEDs on/o
• TIMER: Cycle through 10/20/30 minute timers, or turn o
- Both 10 & 20 minute lights on indicate 30 minutes
• FLASHLIGHT: Press and hold to turn remote flashlight on
• MODE: Cycle through 3 massage modes

8 |
PAIRING REMOTE
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
1. Press and hold the adjust head up and adjust foot up buttons.
2. Press and hold the pairing button underneath the bed.
-Pairing button is on the wire attached to the power supply
3. Two beeps will sound to indicate a successful pairing.
The remote comes paired to the bed. If the remote gets unpaired, do the following to pair the remote:
1. Adjust the bed to your desired position.
2. Press and hold the memory programmable button for 5 seconds.
3. Buttons will flash to indicate the position has been saved.
4. If desired, repeat to set the other memory programmable button.
PRESET 1 PRESET 2
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
SETTING PROGRAMMABLE POSITIONS
NOTE: M1 and M2 buttons do not come programmed. Each button must be individually programmed
before use.

| 9
PRESET POSITIONS
TV SETTING:
Head Angle 44°
Foot Angle 26°
ANTI-SNORE SETTING:
Head Angle 10°
Foot Angle 0°
ZERO GRAVITY (ZG) SETTING:
Head Angle 16°
Foot Angle 35°

10 |
WARNINGS REGARDING BATTERIES
•Do not mix alkaline, standard (carbon zinc) and rechargeable (nickel hydride) batteries.
•Do not mix old and new batteries.
•Non-rechargeable batteries should not be charged.
•Rechargeable batteries should be charged under adult supervision only.
•Exhausted batteries should be removed.
•The supply terminals should not be short-circuited.
•Do not put batteries next to or in a heat source (fire, electronic heating device, etc.).
•Do not hit batteries against hard objects.
•Do not submerge batteries in water.
•Batteries should be inserted with the correct polarity.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This product may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Responsible party (contact for FCC matters only):
Quality Control Dept.
15101 Red Hill Ave.
Tustin, CA 92780
FCC COMPLIANCE STATEMENT

| 11
TROUBLESHOOTING
Problem Reason Solution
Remote working, but bed
not responding Unplugged
Bed functions not activating
Remote not working
Head/foot elevates but does
not return to flat position
Make sure power cord is
plugged into a working outlet
Remote unpaired
Malfunction
Power outlet not working
Loose connections
Remote out of batteries
Bed mechanism obstructed
Head section too close to wall
Remote out of batteries
Motor overworked
Buttons not completely pushed
Bed on hard surface
Motor mechanisms misaligned
Bed positioned against another
object or wall
Normal
Thermal protection activated
Remote has radio
frequency interference
Pair remote with bed
Reset; unplug power cord, wait
30 seconds, then plug in
Plug into working outlet
Ensure all connections to
control box are secure
Replace batteries
Elevate bed and
remove obstruction
Move head further from wall
Replace batteries
Allow motor to rest for
20 minutes
Push buttons squarely
and accurately
Place carpet or rubber feet
under each leg
Elevate sections a short
distance to realign
Make sure bed is positioned
away from wall or objects
-
Wait 30 minutes, then turn
massage back on
Wait and try again later
Head/foot lift has
minor interference
Excessive motor noise
Clicking noise when raising
or lowering
Massage motor overheats
or stops

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
HELP CENTER
Product Assembly Returns & Refunds
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!
6 |10 |
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly Returns & Refunds
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!
6 |8|6 |

SKY5679
INSTRUCTION
MANUAL
Upholstered Adjustable
Split King Bed Base
Ver. 3

2|
This split king bed is
made up of two XL
twin beds.
bestchoiceproducts.com

| 3
PARTS
12 PCS
LEG
A
2 PCS
POWER CORD
B
2 PCS
POWER SUPPLY
C
2 AAA BATTERIES
(PER REMOTE)
+AAA -
TOOLS REQUIRED
UP TO 30 MIN.
ASSEMBLY
2 PERSON
ASSEMBLY
NOTICE
•This item is intended for indoor, household use only.
•Ensure that your voltage is consistent with specifications.
•Do not modify the plug in any way.
•This item is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the item by a person responsible for their safety.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
• Do not use this item if your physician or healthcare professional has advised against massager use.
• If you experience any pain, illness, or discomfort during use, discontinue using this item and consult
with a physician.
• This product features electrical components. Do not expose to high temperatures or humidity.
• Keep item away from direct sunlight and other heat sources (stove, heater, etc.).
• Do not spill water on the electrical components or connectors.
• Do not touch the plug or operate with wet hands.
• Do not unplug by pulling on the power cord. Always grasp the plug firmly and pull straight out from
the outlet.
• Do not use if the plug or any components are damaged.
WARNING
Please retain these instructions for future reference.
850 LBS
PER BED
LBS

PRODUCT ASSEMBLY
1Remove all packaging and parts from the underside of the bed.
Screw six part A legs into the leg bases.
4|
PARTS
2 PCS
RETAINER BAR
D
2 PCS
REMOTE
E
A
x6

3With the help of another person, carefully flip the bed onto its legs. Insert the part D retainer
bar into the slots.
Plug the power cord into a wall outlet. Repeat to build another bed.
PRODUCT ASSEMBLY
2Insert the part B power cord into the part C power supply, then join the power supply to the
corresponding connector under the bed.
| 5
C
D
B

6 |
1. Control box
2. Head motor2. Head motor
3. Head massage motor
5. Foot massage motor
6. LED lights
7. Leg base 11. USB ports
9. Power supply
10. Pairing button
4. Foot motor 8. Power cord
DIAGRAM
1
6
8
9
10
11
7
4
3
2
5

| 7| 7| 7
CONTROL PANEL
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
TV PRESET POSITION
ADJUST HEAD
FOOT MASSAGE
HEAD MASSAGE
TIMER
MEMORY PROGRAMMABLE
BUTTONS
ZERO G PRESET POSITION
ADJUST FOOT
FLAT POSITION
10/20/30 MINUTE TIMER
INDICATORS
MODE
LIFT HEAD/FOOT
LOWER HEAD/FOOT
FLASHLIGHT
LEDS
LOUNGE PRESET
POSITON
• HEAD MASSAGE: Cycle through 3 intensity levels
• FOOT MASSAGE: Cycle through 3 intensity levels
• LEDS: Toggle under bed LEDs on/o
• TIMER: Cycle through 10/20/30 minute timers, or turn o
- Both 10 & 20 minute lights on indicate 30 minutes
• FLASHLIGHT: Press and hold to turn remote flashlight on
• MODE: Cycle through 3 massage modes

8 |
PAIRING REMOTE
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
1. Press and hold the adjust head up and adjust foot up buttons.
2. Press and hold the pairing button underneath the bed.
-Pairing button is on the wire attached to the power supply
3. Two beeps will sound to indicate a successful pairing.
The remote comes paired to the bed. If the remote gets unpaired, do the following to pair the remote:
NOTE: There are two individual remotes for the two beds. You can either use a separate remote for each
bed, or pair both beds to one remote.
1. Adjust the bed to your desired position.
2. Press and hold the memory programmable button for 5 seconds.
3. Buttons will flash to indicate the position has been saved.
4. If desired, repeat to set the other memory programmable button.
PRESET 1 PRESET 2
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
TV LOUNGE ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2 FLAT
HEAD FOOT
MODE
SETTING PROGRAMMABLE POSITIONS
NOTE: M1 and M2 buttons do not come programmed. Each button must be individually programmed
before use.
Table of contents
Other BCP Indoor Furnishing manuals