BCP SKY4553 User manual

SKY4553 + SKY4554Ver. 3
INSTRUCTION
MANUAL
2-Piece L-Shaped
Sectional w/ Ottoman

Hardware & parts
are located in
the compartment
underneath the sofa.
Make sure to
remove all items
before assembly.
bestchoiceproducts.com

Parts and/or hardware located
underneath this sofa.
Parts and/or hardware located
underneath this lounger.
Hidden under compartment.
|3
HARDWARE
1
12 PCS
M8 x 100mm BOLT M8 WASHER M8 NUT
2
16 PCS
3
16 PCS
TOOLS REQUIRED
APPROXIMATELY
30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
500 LBS
CAPACITY
LBS
•Please do not exceed the weight limitations of this item.
•Do not stand on or jump on any part of this item.
•Firmly secure all bolts and knobs before use.
•Reconfirm that all bolts and knobs are secure every 90 days.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or
factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE Please retain these instructions for future reference.
PARTS
1 PC
SOFA
1 PC
LOUNGER
ABARMREST
C
2 PCS
WRENCH
(PROVIDED)
RIGHT
SIDE
LEFT
SIDE
CALIFORNIA PROPOSITION 65
WARNING: This product can expose you to Diisononyl phthalate (DINP), which is known to the State of
California to cause cancer. For more information go to www.P65Warnings.ca.gov

4 |
Remove the parts and hardware from the compartment underneath the furniture.
Use your hand to screw eight part 1 bolts into two part C armrests,
four bolts per armrest.
PRODUCT ASSEMBLY
1
PARTS
12 PCS
LEG
D
1 PC
OTTOMAN
2 PCS
SEAT CUSHION
E F
LONG CUSHION
G
1 PC 3 PCS
BACK CUSHION
1 PC
OTTOMAN CUSHION
HI
C1x8
x2
Parts and/or hardware located
underneath this ottoman.
Hidden under compartment.
Hidden under compartment.

PRODUCT ASSEMBLY
|5
2
3
From within the compartment, attach an armrest to the part A sofa with four part 2 washers and
four part 3 nuts. Screw in four part D legs.
A
2x4 3x4
Dx4
From within the compartment, attach an armrest to the part B lounger with four part 2 washers
and four part 3 nuts. Screw in four part D legs.
B
x4
x4 3
2
Dx4