BCP Mercedes G63 Push Car User manual

SKY5127 + SKY5128 + SKY5129
Ver. 2
INSTRUCTION
MANUAL
Mercedes G63 Push Car
Ride-On

AGE RANGE: 2 to 3 years old
WEIGHT CAPACITY: 40 lbs.
2|
NOTICE
• Toy must be assembled by an adult.
• Immediately dispose of all bags and packaging to avoid suocation.
• Do not operate vehicle in the dark; only operate in the daytime or a well-lit area.
• To reduce the risk of injury, adult supervision is required at all times.
• Protective equipment, such as wrist guards, kneepads, and a helmet, should be worn by children.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
• Only one rider is allowed on the vehicle at a time.
• Never leave a child unattended.
• Be aware that this toy has no brake.
• Always sit in the seat when using this vehicle.
• Keep your hands, hair, and clothes away from moving parts.
• Children under 2 years of age cannot use the vehicle.
• Only drive on level ground.
• Do not drive the vehicle into loose dirt, mud, sand, fine gravel, or on wet surfaces.
To reduce the risk of injury, adult supervision is required. Never use on roadways, near motor vehicles, on
or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never
allow more than one child in the vehicle at a time.
WARNING
Please retain these instructions for future reference.
BATTERY WARNINGS
The following safety hazards may result in serious injury or death:
• Use of a battery or charger other than the supplied rechargeable battery and charger may cause a fire
or explosion. Only use the supplied battery and charger.
• Use of the rechargeable battery and charger for any other product may result in overheating, fire,
or explosion. Never use the supplied rechargeable battery and charger with another product.
• Explosive gases are created during charging. Charge the battery in a well-ventilated area. Do not charge
the battery near heat or flammable materials.
• Contact between the positive and negative terminals may result in fire or explosion. Avoid direct contact
between the terminals. Picking up the battery by the wires or charger can cause damage to the battery
and may result in a fire. Always pick up the battery by its case or handles.
• Liquids on the battery may cause fire or electric shock. Always keep all liquids away from the battery and
keep the battery dry. Contact or exposure to battery leakage (lead acid) may cause serious injury.
If contact or exposure occurs immediately call your physician. If the chemical is on the skin or in the eyes,
flush with cool water for 15 minutes. If the chemical was swallowed, immediately give the person water
or milk. Do not give water or milk if the patient is vomiting or has a decreased level of alertness. Do not
induce vomiting.
• Battery posts, terminals, and related accessories contain lead and lead compounds (acid) – chemicals
known to the State of California to cause cancer, reproductive harm, and are toxic and corrosive.
Never open the battery.
• Tampering or modifying the electric circuit system may cause a shock, fire or explosion and permanently
damage the system. Exposed wiring and circuitry in the charger may cause electric shock. Always keep
the charger housing closed.

| 3
1 PC
1 PC
STEERING WHEEL
1 PC
STEERING COLUMN
1 PC
DBACKREST
PARTS
ABSPARE WHEEL
C
HARDWARE
1
1 PC
M10 WASHER PIN
2
1 PC
TOOLS REQUIRED
APPROXIMATELY
20 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER 40 LBS
CAPACITY
LBS
NEEDLE NOSE
PLIERS
6 AA BATTERIES
+AA -

4|
PRODUCT ASSEMBLY
Within the seat, remove the battery cover and install four AA batteries
Remove all parts and packaging from within the vehicle body.
Remove the battery cover from the part A steering wheel and install two AA batteries.
1
2
+AA -
+AA -
+AA -
+AA -
A
+AA -
+AA -

| 5
PRODUCT ASSEMBLY
Remove the nut and bolt from the part A steering wheel, slide it onto the steering column, and
replace the nut and bolt to secure the steering wheel.
3
4
Carefully flip the vehicle on its side. Slide the part B steering column through the car and into
the steering wheel mount.
Insert the hooked end of the steering column into the front axle, slide on the part 1 washer, and
secure it with the part 2 pin.
NOTE: Use pliers to bend the pin and lock the steering column in place.
B
A
1
2

6|
PRODUCT ASSEMBLY
Insert the part D backrest.
5
6
Snap on the part C spare wheel.
C
D

| 7
CARING FOR YOUR RIDE-ON
• Occasionally use a light oil to lubricate moving parts (wheels, etc.).
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Do not leave the vehicle in the sun for long periods of time or fading may occur. Store in shade or cover
with tarp.
• Do not wash the vehicle with a hose.
• Do not wash the vehicle with soap.
• Clean vehicle with a soft, dry cloth.
DASHBOARD DIAGRAM
• Power/Volume: Turn knob clockwise to power on and increase volume
• AUX Input: Plug in a music player to play music
• USB Port: Play music from a USB drive (MP3 format only)
HORN
USB PORT POWER/VOLUMEAUX INPUTHORN SOUNDS
IGNITION

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!