BEBE CONFORT Creatis.fix User manual

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Use a Créatis.fix by bébéconfort
Created by : Bea
This how to guide is doable in : 10 to 20 min
and the level is : Easy
Instructions for use of Créatis.fix by bébéconfort
1 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 1/54
Step : 2/54
Dear Customer,
Thank you for the confidence you have shown in us by choosing one of our products. We hope it will meet all your
expectations. This certificate indicates that this product has been manufactured according to the applicable quality standards
and that it has been subjected to numerous checks during the various manufacturing stages.
2 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 3/54
INSTRUCTIONS FOR USE
Créatis.fix bébéconfort
GR O+
0-13 Kg
Step : 4/54
INSTRUCTIONS FOR USE OF CREATIS.FIX
Direction : Rear-facing
Position : Front and rear seats
Group O+, 0 to 13 kg
3 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 5/54
DO NOT install the child safety seat facing the rear on a front seat fitted with an airbag.
DANGER OF DEATH OR SERIOUS INJURY.
Step : 6/54
The seat can bu used in the front （if allowed by current legislation） or on the rear seats.
Folding seats must always be locked in place. This device must be used only on approved vehicles fitted with 3 point seat
belts/static/retractable, approved to ECE/ UN regulation or equivalent standard.
4 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 7/54
Adjust the position of the vehicle’s seats so as not to interfere with the correct fitting and effectiveness of the child safety seat:
Step : 8/54
Push the front passenger seat forward to install the child safety seat in the rear of the vehicle.
5 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 9/54
Push the front passenger seat backwards when installing in the front of the vehicle to use the length of the front seat belt to
maximum advantage
Step : 10/54
Ensure that the base of the child safety seat is solidly placed on the seat of the vehicle.
6 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 11/54
CORRECT INSTALLATION OF CREATIS.FIX ONLY
WARNING : if in any doubt about the correct installation or use of the system, the user is advised to contact the distributor or
the manufacturer of the child restraining device system.
Step : 12/54
INCORRECT INSTALLATIONS OF CREATIS.FIX ONLY
WARNING : if in any doubt about the correct installation or use of the system, the user is advised to contact the distributor or
the manufacturer of the child restraining device system.
7 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 13/54
2 - Sunshade
3 - 2 press studs for fastening the sunshade
4 - 2 press studs for fastening the mosquito net
5 - Modulo Clip® System （For fastening on the Bebe Confort frame）
6 - Cushion for the newborn （up to 3 months）
7 - Fastening hooks for the mosquito net
Step : 14/54
8 - Adjusting strap for harness
9 - Adjusting latch for harness
10 - Buckle cover
11 - Harness buckle
12 - Shoulder pads
24 - Elastic retainers for keeping the harness out of the way （making it easier to get your child into the seat）
8 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 15/54
13 - Headrest
14 - Fabric
15 - Storage pocket for instructions （between the shell and the polystyrene）
16 - Strap guide
17 - Base
18 - Installation label （approval no）
19 - Knob for unlocking handle
20 - Right-hand blue marker （Shows the position of the belt）
21 - Strap guide
22 - Strap guide
23 - Carry handle
Step : 16/54
1 - a. Raincover, b. Mosquito net c. Footmuff
*Sold as an accessory
9 / 28

Use a Créatis.fix by bébéconfort
Made with Peoplbrain - www.peoplbrain.com
Step : 17/54
CAUTION: before starting to fit the seat read through all the instructions provided. The carrying handle of the Creatis Fix must
always be in the upward position when it is in use as a car seat. The blue marks on the Creatis.fix indicate the path of the
safety belt.
1 - Fasten the belt and place your Creatis.fix facing backwards on the seat of the vehicle.
Step : 18/54
2’ - Thread the lap belt through the lower slot in the shell and fasten it as shown.
CAUTION: when passing the lap belt through the slot in the shell, always ensure that it is not twisted.
10 / 28