Beko BRVPF 090 User manual

Split-type room air
conditioner
User Manual
BRVPF 090 BRVPF 091 BRVPF 120 BRVPF 121
BRVPG 090 BRVPG 091 BRVPG 120 BRVPG 121
EN RO

Please read this user manual rst!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results
from your product which has been manufactured with high quality and state-of-
the-art technology. Therefore, please read this entire user manual and all other
accompanying documents carefully before using the product and keep it as a
reference for future use. If you handover the product to someone else, give the user
manual as well. Follow all warnings and information in the user manual.
Meanings of the symbols
Following symbols are used in the various section of this manual:
C
Important information or
useful hints about usage.
A
Warning for hazardous
situations with regard to life
and property.
Warning to actions that
must never perform.
This product has been produced in environmentally friendly, modern facilities
Complies with the WEEE Regulation. Does not contain PCB.
B
Warning for electric shock.
Warning for danger of fire.
Warning for hot surfaces.

Splıt-type room air conditioner / User Manual 3 / 52 EN
1 Safety nstructons 4
2 Unt specfcatons and features 7
2.1 Unit parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2 Achieving optimal performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.3 Inverter split type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.4 Fixed-speed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
2.5 Other features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3 Manual operaton (wthout remote) 13
3.1 How to operate your unit without the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Care and mantenance 14
4.1 Cleaning your indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.2 Cleaning your air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.3 Air filter reminders (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.4 Maintenance - long periods of non-use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.5 Maintenance -pre-season inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5 Troubleshootng 19
5.1 Common issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6 European dsposal gudelnes 23
7 Installaton nstructons 24
7.1 F-Gas instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8 Specfcaton 25
CONTENTS

4 / 52 EN Splıt-type room air conditioner / User Manual
Read safety precautions before installation
Incorrect installation due to ignoring instructions can
cause serious damage or injury.
The seriousness of potential damage or injuries is classified as
Warning.
Warning
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
Installation warnings
• Ask an authorized dealer to install this air conditioner. Inappropriate
installation may cause water leakage, electric shock, or fire.
• All repairs, maintenance and relocation of this unit must be
performed by an authorized service technician. Inappropriate
repairs can lead to serious injury or product failure.
Warnings for product use
• If an abnormal situation arises (like a burning smell), immediately
turn off the unit and pull the power plug. Call your dealer for
instructions to avoid electric shock, fire or injury.
• Do not insert fingers, rods or other objects into the air inlet or
outlet. This may cause injury, since the fan may be rotating at high
speeds.
1 Safety nstructons

Splıt-type room air conditioner / User Manual 5 / 52 EN
1 Safety nstructons
• Do not use flammable sprays such as hair spray, lacquer or paint
near the unit. This may cause fire or combustion.
• Do not operate the air conditioner in places near or around
combustible gases. Emitted gas may collect around the unit and
cause explosion.
• Do not operate the air conditioner in a wet room (e.g., bathroom or
laundry room). This can cause electrical shock and cause the product
to deteriorate.
• Do not expose your body directly to cool air for a prolonged period
of time.
Electrical warnings
• Only use the specified power cord. If the power cord is damaged, it
must be replaced by the manufacturer or certified service agent.
• Keep power plug clean. Remove any dust or grime that accumulates
on or around the plug. Dirty plugs can cause fire or electric shock.
• Do not pull power cord to unplug unit. Hold the plug firmly and pull
it from the outlet. Pulling directly on the cord can damage it, which
can lead to fire or electric shock.
• Do not use an extension cord, manually extend the power cord, or
connect other appliances to the same outlet as the air conditioner.
Poor electrical connections, poor insulation, and insufficient voltage
can cause fire.
Cleaning and maintenance warnings
• Turn off the device and pull the plug before cleaning. Failure to do
so can cause electrical shock.

6 / 52 EN Splıt-type room air conditioner / User Manual
• Do not clean the air conditioner with excessive amounts of water.
• Do not clean the air conditioner with combustible cleaning agents.
Combustible cleaning agents can cause fire or deformation.
Warning
• If the air conditioner is used together with burners or other heating
devices, thoroughly ventilate the room to avoid oxygen deficiency.
• Turn off the air conditioner and unplug the unit if you are not going
to use it for a long time.
• Turn off and unplug the unit during storms.
• Make sure that water condensation can drain unhindered from the
unit.
• Do not operate the air conditioner with wet hands. This may cause
electric shock.
• Do not use device for any other purpose than its intended use.
• Do not climb onto or place objects on top of the outdoor unit.
• Do not allow the air conditioner to operate for long periods of time
with doors or windows open or if the humidity is very high.
1 Safety nstructons

Splıt-type room air conditioner / User Manual 7 / 52 EN
2.1 Unt parts
2
1
34
6
5
7
8
Fresh Fresh Defrost Defrost Run Run Timer Timer
1. Display window (A)
2. Power Cable (Some Units)
3. Remote Control
4. Remote Control Holder (Some Units)
5. Display window (B)
6. Display window (C)
7. Louver
8. Front Panel
Display Code Meanings
"Fresh" when Fresh feature is activated(some units)
"Defrost" when defrost feature is activated.
"Run" when the unit is on.
"Timer" when TIMER is set.
" " Not available for all units.
When ECO function(some units) is activated, the ' ' illuminates gradually one by one as -- -- --
-- set temperature -- ...... in one second interval.
In other modes, the unit will display your temperature setting.
In Fan mode, the unit will display the room temperature.
When error occurs, it displays error code.
" " for 3 seconds when:
• TIMER ON is set
2 Unt specfcatons and features

8 / 52 EN Splıt-type room air conditioner / User Manual
• FRESH, SWING, TURBO, or SILENCE features are turned on
" " for 3 seconds when:
• TIMER OFF is set
• FRESH, SWING, TURBO, or SILENCE features are turned off
" " when anti-cold air feature is turned on
" " when defrosting
" " when unit is self-cleaning
" " when freeze protection is turned on
" " when Wireless Control feature is activated(some units)
C
Note: A guide on using the infrared remote is not included in this literature package.
2.2 Achevng optmal performance
Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following
temperature ranges. When your air conditioner is used outside of these ranges, certain safety
protection features will activate and cause the unit to perform less than optimally.
2.3 Inverter splt type
COOL mode HEAT mode DRY mode
Room Temperature 17°C - 32°C
(63°F - 90°F)
0°C - 30°C
(32°F - 86°F)
10°C - 32°C
(50°F - 90°F)
Outdoor Temperature
0°C - 50°C
(32°F - 122°F)
-15°C - 30°C
(5°F - 86°F)
0°C - 50°C
(32°F - 122°F)
-15°C - 50°C
(5°F - 122°F)
(For models with
low temp. cooling
systems.)
0°C - 60°C
(32°F - 140°F)
(For special tropical
models)
0°C - 60°C
(32°F - 140°F)
(For special tropical
models)
2 Unt specfcatons and features

Splıt-type room air conditioner / User Manual 9 / 52 EN
For outdoor units with auxiliary electric heater
When outside temperature is below 0°C (32°F ), we strongly recommend keeping the unit plugged in
at all time to ensure smooth ongoing performance.
2.4 Fxed-speed type
COOL mode HEAT mode DRY mode
Room
Temperature
17°-32°C
(63°-90°F)
0°-30°C
(32°-86°F)
10°-32°C
(50°-90°F)
Outdoor
Temperature
18°-43°C
(64°-109°F)
-7°-24°C
(19°-75°F)
11°-43°C
(52°-109°F)
-7°-43°C
(19°-10 9°F)
(For models with low-temp
cooling systems)
18°-43°C
(64°-109°F)
18°-54°C
(64°-129°F)
(For special tropical models)
18°-54°C
(64°-129°F)
(For special tropical models)
To further optimize the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
For a detailed explanation of each function, refer to the Remote control manual.
2.5 Other features
• Auto-restart
If the unit loses power, it will automatically restart with the prior settings once power has been
restored.
• Anti-mildew (some units)
When turning off the unit from COOL, AUTO (COOL), or DRY modes, the air conditioner will continue
operate at very low power to dry up condensed water and prevent mildew growth.
• Refrigerant Leakage Detection (some units)
The indoor unit will automatically display “EC” when the unit detects refrigerant leakage.
2 Unt specfcatons and features

10 / 52 EN Splıt-type room air conditioner / User Manual
• Wireless control (some units)
Wireless control allows you to control your air conditioner using your mobile phone and a Wireless
connection.
For the USB device access, replacement, maintenance operations must be carried out by
professional staff.
• Louver angle memory (some units)
When turning on your unit, the louver will automatically resume its former angle.
For a detailed explanation of your unit's advanced functionality (such as TURBO mode and its self-
cleaning functions), refer to the Remote Control Manual.
C
Note:
Illustrations in this manual are for explanatory purposes. The actual shape of your
indoor unit may be slightly different. The actual shape shall prevail.
• Setting angle of air flow
Setting vertical angle of air flow
While the unit is on, use the SWING/DIRECT button to set the direction (vertical angle) of airflow.
1. Press the SWING/DIRECT button once to activate the louver. Each time you press the button, it
will adjust the louver by 6°. Press the button until the direction you prefer is reached.
2. To make the louver swing up and down continuously, press and hold the SWING/DIRECT button
for 3 seconds. Press it again to stop the automatic function.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set manually. Grip the deflector rod (See Fig.B) and
manually adjust it to your preferred direction.
For some units, the horizontal angle of the airflow can be set by remote control, please refer to the
Remote Control Manual.
C
Note on louver angles
When using COOL or DRY mode, do not set louver at too vertical an angle for long
periods of time. This can cause water to condense on the louver blade, which will drop
on your floor or furnishings. (See Fig.A)
When using COOL or HEAT mode, setting the louver at too vertical an angle can reduce
the performance of the unit due to restricted air flow.
Do not move louver by hand. This will cause the louver to become out of sync. If this
occurs, turn off the unit and unplug it for a few seconds, then restart the unit. This will
reset the louver.
2 Unt specfcatons and features

Splıt-type room air conditioner / User Manual 11 / 52 EN
Range
Fig. A
A
Warnng
Do not keep louver at too vertical an angle for long periods of time. This can cause
water condensation to drip on your furnishings.
A
Warnng
Do not put your fingers in or near the blower and suction side of the unit. The high-
speed fan inside the unit may cause injury.
Deflector rod
Fig. B
2 Unt specfcatons and features

12 / 52 EN Splıt-type room air conditioner / User Manual
• Sleep operation
The SLEEP function is used to decrease energy use while you sleep (and don't need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1 hour, and will increase an additional 1°C (2°F) after
another hour. When in HEAT mode, the unit will decrease the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F) after another hour.
It will hold the new temperature for 5 hours, then the unit will turn off automatically.
C
Note: The SLEEP function is not available in FAN or DRY mode.
1hr 1hr
+/- 1˚C/2˚F +/- 1˚C/2˚F
SLEEP Operation
Saving energy during sleep
Set
temperature
7 hours
timer off
2 Unt specfcatons and features

Splıt-type room air conditioner / User Manual 13 / 52 EN
3 Manual operaton (wthout remote)
3.1 How to operate your unt wthout the remote control
In the event that your remote control fails to work, your unit can be operated manually with the
MANUAL CONTROL button located on the indoor unit. Note that manual operation is not a long-term
solution, and that operating the unit with your remote control is strongly recommended.
Before manual operation
Unit must be turned off before manual operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of the unit.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL button again to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off.
6. Close the front panel.
A
Warnng
The manual button is intended for testing purposes and emergency operation only.
Please do not use this function unless the remote control is lost and it is absolutely
necessary. To restore regular operation, use the remote control to activate the unit.
Manual control button

14 / 52 EN Splıt-type room air conditioner / User Manual
4 Care and mantenance
4.1 Cleanng your ndoor unt
A
Before cleanng or mantenance
Always turn off your air conditioner system and disconnect its power
supply before cleaning or maintenance.
A
Warnng
Only use a soft, dry cloth to wipe the unit clean. If the unit is especially dirty, you can
use a cloth soaked in warm water to wipe it clean.
• Do not use chemicals or chemically treated cloths to clean the unit
• Do not use benzene, paint thinner, polishing powder or other solvents to clean the
unit. They can cause the plastic surface to crack or deform.
• Do not use water hotter than 40°C (104°F) to clean the front panel. This can cause
the panel to deform or become discolored.
4.2 Cleanng your ar flter
A clogged air conditioner can reduce the cooling efficiency of your unit, and can also be bad for your
health. Make sure to clean the filter once every two weeks.
1. Lift the front panel of the indoor unit.
2. First press the tab on the end of filter to loosen the buckle, lift it up, then pull it towards yourself.
3. Now pull the filter out.
4. If your filter has a small air freshening filter, unclip it from the larger filter. Clean this air freshening
filter with a hand-held vacuum.
5. Clean the large air filter with warm, soapy water. Be sure to use a mild detergent.
6. Rinse the filter with fresh water, then shake off excess water.
7. Dry it in a cool, dry place, and refrain from exposing it to direct sunlight.
8. When dry, re-clip the air freshening filter to the larger filter, then slide it back into the indoor unit.
9. Close the front panel of the indoor unit.

Splıt-type room air conditioner / User Manual 15 / 52 EN
Filter Tab
Remove air freshening filter from back of
larger filter (some units)
A
Warnng
Do not touch air freshening (Plasma) filter for at least 10 minutes after turning off the
unit.
4 Care and mantenance

16 / 52 EN Splıt-type room air conditioner / User Manual
A
Warnng
• Before changing the filter or cleaning, turn off the unit and disconnect its power
supply.
• When removing filter, do not touch metal parts in the unit. The sharp metal edges can
cut you.
• Do not use water to clean the inside of the indoor unit. This can destroy insulation
and cause electrical shock.
• Do not expose filter to direct sunlight when drying. This can shrink the filter.
4.3 Ar flter remnders (optonal)
4.3.1 Ar flter cleanng remnder
After 240 hours of use, the display window on the indoor unit will flash "CL." This is a reminder to clean
your filter. After 15 seconds, the unit will revert to its previous display.
To reset the reminder, press the LED button on your remote control 4 times, or press the MANUAL
CONTROL button 3 times. If you don't reset the reminder, the "CL" indicator will flash again when you
restart the unit.
4.3.2 Ar flter replacement remnder
After 2,880 hours of use, the display window on the indoor unit will flash "nF." This is a reminder to
replace your filter. After 15 seconds, the unit will revert to its previous display.
To reset the reminder, press the LED button on your remote control 4 times, or press the MANUAL
CONTROL button 3 times. If you don't reset the reminder, the "nF" indicator will flash again when you
restart the unit.
A
Warnng
• Any maintenance and cleaning of outdoor unit should be performed by an authorized
dealer or a licensed service provider.
• Any unit repairs should be performed by an authorized dealer or a licensed service
provider.
4 Care and mantenance

Splıt-type room air conditioner / User Manual 17 / 52 EN
4.4Mantenance - long perods of non-use
If you plan not to use your air conditioner for an extended period of time, do the following:
Clean all filters Turn on FAN function until unit dries out
completely
Turn off the unit and disconnect the power Remove batteries from remote control
4 Care and mantenance

18 / 52 EN Splıt-type room air conditioner / User Manual
4.5 Mantenance -pre-season nspecton
After long periods of non-use, or before periods of frequent use, do the following:
Check for damaged wires Clean all filters
Check for leaks Replace batteries
Make sure nothing is blocking all air inlets and outlets
4 Care and mantenance

Splıt-type room air conditioner / User Manual 19 / 52 EN
5 Troubleshootng
C
Safety precautions
If ANY of the following conditions occurs, turn off your unit immediately!
• The power cord is damaged or abnormally warm
• You smell a burning odor
• The unit emits loud or abnormal sounds
• A power fuse blows or the circuit breaker frequently trips
• Water or other objects fall into or out of the unit
Do not attempt to fix these yourself! Contact an authorized service
provider immediately!
5.1 Common ssues
The following problems are not a malfunction and in most situations will not require repairs.
Issue Possible Causes
Unit does not turn
on when pressing
ON/OFF button
The Unit has a 3-minute protection feature that prevents the unit from
overloading. The unit cannot be restarted within three minutes of being
turned off.
The unit changes
from COOL/HEAT
mode to FAN mode
The unit may change its setting to prevent frost from forming on the
unit. Once the temperature increases, the unit will start operating in the
previously selected mode again.
The set temperature has been reached, at which point the unit turns off
the compressor. The unit will continue operating when the temperature
fluctuates again.
The indoor unit
emits white mist
In humid regions, a large temperature difference between the room's air
and the conditioned air can cause white mist.
Both the indoor and
outdoor units emit
white mist
When the unit restarts in HEAT mode after defrosting, white mist may be
emitted due to moisture generated from the defrosting process.
The indoor unit
makes noises
A rushing air sound may occur when the louver resets its position.
A squeaking sound may occur after running the unit in HEAT mode due to
expansion and contraction of the unit's plastic parts.

20 / 52 EN Splıt-type room air conditioner / User Manual
5 Troubleshootng
Issue Possible Causes
Both the indoor
unit and outdoor
unit make noises
Low hissing sound during operation: This is normal and is caused by
refrigerant gas flowing through both indoor and outdoor units.
Low hissing sound when the system starts, has just stopped running, or
is defrosting: This noise is normal and is caused by the refrigerant gas
stopping or changing direction.
Squeaking sound: Normal expansion and contraction of plastic and
metal parts caused by temperature changes during operation can cause
squeaking noises.
The outdoor unit
makes noises The unit will make different sounds based on its current operating mode.
Dust is emitted
from either the
indoor or outdoor
unit
The unit may accumulate dust during extended periods of non-use,
which will be emitted when the unit is turned on. This can be mitigated by
covering the unit during long periods of inactivity.
The unit emits a
bad odor
The unit may absorb odors from the environment (such as furniture,
cooking, cigarettes, etc.) which will be emitted during operations.
The unit's filters have become moldy and should be cleaned.
The fan of the
outdoor unit does
not operate
During operation, the fan speed is controlled to optimize product
operation.
Operation is erratic,
unpredictable,
or unit is
unresponsive
Interference from cell phone towers and remote boosters may cause the
unit to malfunction.
In this case, try the following:
• Disconnect the power, then reconnect.
• Press ON/OFF button on remote control to restart operation.
C
Note:
If problem persists, contact a local dealer or your nearest customer service center.
Provide them with a detailed description of the unit malfunction as well as your model
number.