Beko BEVPI 090 User manual

User Manual
10M-8505283200-4921-01
EN - RO - UA
Split Type Air Conditioner
BEVPI 090/BEVPI 091
BEVPI 120/BEVPI 121
BEVPI 180/BEVPI 181
BEVPI 240/BEVPI 241
BEHPI 090/BEHPI 091
BEHPI 120/BEHPI 121
BEHPI 180/BEHPI 181
BEHPI 240/BEHPI 241
BEEPI 090/BEEPI 091
BEEPI 120/BEEPI 121

ENGLISH 3-58
ROMÂNĂ 59-116
УКРАЇНСЬКОЮ 117-184
CONTENTS
V2110002
AB UM

Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from your product which
has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire
user manual and all other accompanying documents carefully before using the product and keep it as a
reference for future use. If you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Meanings of the symbols
Following symbols are used in the various section of this manual:
This product has been manufactured at modern facilities respectful to the environment without harming nature.
Complies with the WEEE Regulation. Does not contain PCB.
C
Important information or useful hints
about usage.
A
Warning for hazardous situations with
regard to life and property.
Warning to actions that must never
perform.
B
Warning for electric shock.
This symbol shows that information is
available such as the operating manual
or installation manual.
Do not cover it.
This symbol shows that the operation
manual should be read carefully.
This symbol shows that a service
personnel should be handling this
equipment with reference to the
installation manual.
(For R32/R290 gas type)
This symbol shows that
this appliance used a
flammable refrigerant.
If the refrigerant is
leaked and exposed
to an external ignition
source, there is a risk
of fire.

4 / 184 EN Split Type Air Conditioner / User Manual
CONTENTS
1 Safety Precautions 5
2 Overview 12
2.1 Unit parts ................................................................. 13
2.2 Controls and parts..................................................... 14
3 Unit specifications and features 15
3.1 Indoor unit display..................................................... 15
3.2 Operating temperature .............................................. 16
3.3 Inverter Split type...................................................... 17
3.4 Fixed-speed type ...................................................... 17
3.5 Other features .......................................................... 18
3.6 Setting angle of air flow............................................. 19
3.6.1 Setting vertical angle of air flow .............................. 19
3.6.2 Setting horizontal angle of air flow........................... 19
3.7 Install the HomeWhiz kit (wireless module).................. 19
3.8 Manual operation (without remote)............................. 19
4 Installation 21
4.1 Installation summary - indoor unit .............................. 21
4.2 Installation Instructions – Indoor unit .......................... 22
4.2.1 Prior to installation ................................................. 22
4.2.2 Mounting plate dimensions..................................... 23
4.2.3 Before performing any electrical work, read these
regulations............................................................ 25
4.3 Outdoor Unit Installation ............................................ 29
4.3.1 Installation Instructions – Outdoor unit..................... 29
5 Refrigerant piping connection 35
5.1 Connection Instructions – Refrigerant Piping............... 36
5.2 Instructions for connecting piping to indoor unit .......... 37
5.3 Instructions for connecting piping to outdoor unit ........ 38
6 Air evacuation 39
6.1 Preparations and precautions .................................... 39
6.1.1 Before performing evacuation................................. 39
6.1.2 Evacuation instructions........................................... 39
6.1.3 Note on adding refrigerant...................................... 40
7 Electrical and gas leak checks 41
7.1 Before test run.......................................................... 41
7.2 Electrical safety checks ............................................. 41
7.3 Gas leak checks........................................................ 41
8 Test run 42
8.1 Test run instructions.................................................. 42
9 Care and maintenance 43
9.1 Cleaning your indoor unit........................................... 43
9.2 Cleaning your air filter ............................................... 43
9.3 Maintenance – long periods of non-use...................... 45
9.4 Maintenance – Pre-Season Inspection ....................... 45
10Troubleshooting 46
10.1 Common issues...................................................... 46
10.2 Troubleshooting ...................................................... 48
11European disposal guideline 51
12Installation instructions 52
12.1 F-Gas instruction .................................................... 52
13Specifications 53

5 / 184 EN
Split Type Air Conditioner / User Manual
Warning
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved. Children shall not
playwiththe appliance.Cleaningand
user maintenance shall not be made
by children without supervision
(European Union countries).
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge,unless they have been
given supervision or instruction
concerning use of the appliance
by a person responsible for
their safety. Children should be
supervised to ensure that they do
not play with the appliance.
Warnings for product use
•If an abnormal situation
arises (like a burning smell),
immediately turn off the unit
and disconnect the power. Call
your dealer for instructions to
avoid electric shock, fire or
injury.
•Do not insert fingers, rods or
other objects into the air inlet
or outlet. This may cause injury,
since the fan may be rotating
at high speeds.
•Do not use flammable sprays
such as hair spray, lacquer or
paint near the unit. This may
cause fire or combustion.
•Do not operate the air
conditioner in places near or
around combustible gases.
Emitted gas may collect around
the unit and cause explosion.
•Do not operate your air
conditioner in a wet room
such as a bathroom or laundry
room. Too much exposure to
water can cause electrical
components to short circuit.
1 Safety Precautions

6 / 184 EN Split Type Air Conditioner / User Manual
•Do not expose your body
directly to cool air for a
prolonged period of time.
•Do not allow children to
play with the air conditioner.
Children must be supervised
around the unit at all times.
•If the air conditioner is used
together with burners or other
heating devices, thoroughly
ventilate the room to avoid
oxygen deficiency.
•In certain functional
environments, such as
kitchens, server rooms, etc.,
the use of specially designed
air-conditioning units is highly
recommended.
Cleaning and maintenance
warnings
•Turn off the device and
disconnect the power before
cleaning. Failure to do so can
cause electrical shock.
•Do not clean the air
conditioner with excessive
amounts of water.
•Do not clean the air
conditioner with combustible
cleaning agents. Combustible
cleaning agents can cause fire
or deformation.
Caution
•Turn off the air conditioner and
disconnect the power if you are
not going to use it for a long
time.
•Turn off and unplug the unit
during storms.
•Make sure that water
condensation can drain
unhindered from the unit.
•Do not operate the air
conditioner with wet hands.
This may cause electric shock.
•Do not use device for any
other purpose than its intended
use.
•Do not climb onto or place
objects on top of the outdoor
unit.
•Do not allow the air conditioner
to operate for long periods of
time with doors or windows
open, or if the humidity is very
high.
1 Safety Precautions

7 / 184 EN
Split Type Air Conditioner / User Manual
Electrical warnings
•Only use the specified power
cord. If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
•Keep power plug clean.
Remove any dust or grime that
accumulates on or around the
plug. Dirty plugs can cause fire
or electric shock.
•Do not pull power cord to
unplug unit. Hold the plug
firmly and pull it from the
outlet. Pulling directly on the
cord can damage it, which can
lead to fire or electric shock.
•Do not modify the length of
the power supply cord or use
an extension cord to power the
unit.
•Do not share the electrical
outlet with other appliances.
Improper or insufficient power
supply can cause fire or
electrical shock.
•The product must be properly
grounded at the time of
installation, or electrical shock
may occur.
•For all electrical work, follow
all local and national wiring
standards, regulations, and the
Installation Manual. Connect
cables tightly, and clamp them
securely to prevent external
forces from damaging the
terminal. Improper electrical
connections can overheat and
cause fire, and may also cause
shock. All electrical connections
must be made according to the
Electrical connection diagram
located on the panels of the
indoor and outdoor units.
•All wiring must be properly
arranged to ensure that the
control board cover can close
properly. If the control board
cover is not closed properly,
it can lead to corrosion and
cause the connection points on
the terminal to heat up, catch
fire, or cause electrical shock.
1 Safety Precautions

8 / 184 EN Split Type Air Conditioner / User Manual
•If connecting power to fixed
wiring, an all-pole disconnection
device which has at least 3mm
clearances in all poles, and
have a leakage current that
may exceed 10mA, the residual
current device (RCD) having
a rated residual operating
current not exceeding 30mA,
and disconnection must be
incorporated in the fixed wiring
in accordance with the wiring
rules.
Take note of fuse
specifications
The air conditioner’s circuit board
(PCB) is designed with a fuse to
provide overcurrent protection. The
specifications of the fuse are printed
on the circuit board, such as:
T3.15AL/250VAC, T5AL/250VAC,
T3.15A/250VAC, T5A/250VAC,
T20A/250VAC,T30A/250VAC, etc.
C
Note: For the units using R32
or R290 refrigerant, only the
blast-proof ceramic fuse can
be used.
Warnings for product
installation
1. Installation must be
performed by an authorized
dealer or specialist. Defective
installation can cause water
leakage, electrical shock, or
fire.
2. Installation must be performed
according to the installation
instructions. Improper
installation can cause water
leakage, electrical shock, or
fire.
3. Contact an authorized service
technician for repair or
maintenance of this unit. This
appliance shall be installed
in accordance with national
wiring regulations.
4. Only use the included
accessories, parts, and
specified parts for installation.
Using non-standard parts
can cause water leakage,
electrical shock, fire, and can
cause the unit to fail.
1 Safety Precautions

9 / 184 EN
Split Type Air Conditioner / User Manual
5. Install the unit in a firm location
that can support the unit’s
weight. If the chosen location
cannot support the unit’s
weight, or the installation is
not done properly, the unit
may drop and cause serious
injury and damage.
6. Install drainage piping
according to the instructions in
this manual. Improper drainage
may cause water damage to
your home and property.
7. For units that have an auxiliary
electric heater, do not install
the unit within 1 meter (3 feet)
of any combustible materials.
8. Do not install the unit in a
location that may be exposed
to combustible gas leaks. If
combustible gas accumulates
around the unit, it may cause
fire.
9. Do not turn on the power until
all work has been completed.
10.When moving or relocating
the air conditioner, consult
experienced service
technicians for disconnection
and reinstallation of the unit.
11.How to install the appliance
to its support, please read
the information for details in
“indoor unit installation” and
“outdoor unit installation”
sections.
Note about fluorinated
gasses (Not applicable to the
unit using R290 Refrigerant)
1. This air-conditioning
unit contains fluorinated
greenhouse gasses. For
specific information on the
type of gas and the amount,
please refer to the relevant
label on the unit itself or
the “User Manual - Product
Fiche“ in the packaging of the
outdoor unit. (European Union
products only).
2. Installation, service,
maintenance and repair of
this unit must be performed
by a certified technician.
3. Product uninstallation and
recycling must be performed
by a certified technician.
1 Safety Precautions

10 / 184 EN Split Type Air Conditioner / User Manual
4. For equipment that contains
fluorinated greenhouse gases
in quantities of 5 tonnes of
CO2 equivalent or more, but
of less than 50 tonnes of
CO2 equivalent, If the system
has a leak-detection system
installed, it must be checked
for leaks at least every
24 months.
5. When the unit is checked for
leaks, proper record-keeping
of all checks is strongly
recommended.
Warning for Using R32/R290
Refrigerant
•When flammable refrigerant
are employed, appliance shall
be stored in a well -ventilated
area where the room size
corresponds to the room area
as specific for operation.
For R32 frigerant models:
Appliance shall be installed,
operated and stored in a room
with a floor area larger than
4m2.
1 Safety Precautions
For R290 refrigerant models,
appliance shall be installed,
operated and stored in a room
with a floor area larger than:
<=9000Btu/h units: 13m2
>9000Btu/h and
<=12000Btu/h units: 17m2
>12000Btu/h and
<=18000Btu/h units: 26m2
>18000Btu/h and
<=24000Btu/h units: 35m2
•Reusable mechanical
connectors and flared joints
are not allowed indoors. (EN
Standard Requirements).
•Mechanical connectors used
indoors shall have a rate of
not more than 3g/year at 25%
of the maximum allowable
pressure. When mechanical
connectors are reused indoors,
sealing parts shall be renewed.
When flared joints are reused
indoors, the flare part shall be
re-fabricated. (UL Standard
Requirements)