Belkin F1PI241EGau User manual

Congratulations on the purchase of your new
modem/router.
To make the install process as simple as possible we
have pre-confi gured your modem with your username,
password and settings so you can easily connect. Please
follow the simple steps below to setup your modem.
Identify Components
You will fi nd the following items in your modem box:
VoIP Modem/Router
Power Adapter
Line Filter
Ethernet Cable
(blue)
Telephone Cable
For using VoIP
You will also need the following items (not supplied with
Modem):
Telephone and
phone cable
Spare Telephone
Cable
VoIP Broadband Modem
Setting up for ADSL and VoIP.
For models F1PI241EGau and
F1PI241ENau
Part One - Set up for ADSL with your
VoIP Broadband Modem
D
C
1 Connect the power adapter into a power outlet. Plug the
other end into the “PWR” socket on the modem. Turn
your modem on and the power LED will illuminate.
other end into the “PWR” socket on the modem. Turn
other end into the “PWR” socket on the modem. Turn
D
other end into the “PWR” socket on the modem. Turn
your modem on and the power LED will illuminate.
your modem on and the power LED will illuminate.
your modem on and the power LED will illuminate.
C
your modem on and the power LED will illuminate.
2 Connect the supplied line fi lter into a telephone
socket. Connect the supplied telephone cable to the
Modem and connect the loose end of the cable to
the “ADSL” socket in the line fi lter. The ADSL LED will
fl ash approximately 6-10 times and then remain solid.
Ensure that the online LED is illuminated. If this light is
not illuminated and you have followed the above steps,
ensure your ADSL line has been activated.
Modem and connect the loose end of the cable to
Modem and connect the loose end of the cable to
A
Modem and connect the loose end of the cable to
B
B
A
Power LED will illuminate
LAN LED will illuminate
LAN Ports
B
Power select
Standard phone
line
ADSL Line Port
A
Power Switch
C
PTSN Fail Over
F
E
D
Power LED
4 Make sure your computer is turned on and once your
operating system is loaded, open your web browser and
surf the web. If you are unable to surf the web, follow the
troubleshooting steps on the next page.
Note for Wireless Users: By default, the wireless feature
of your modem is enabled. For help on confi guring
security on your wireless network, please see the manual
included on the CDROM (applies to Belkin ADSL Wireless
Modem only.)
3 Connect the blue Ethernet cable to one of the available
“LAN” ports on the Modem. Connect the other end
of this cable to the network adapter on your computer.
Either Lan 1, 2, 3 or 4 LED will illuminate if you have a
successful connection between your PC and modem.
Start Here
Note:
It is recommended that you place a line fi lter on any
telephones or fax machines you have around the house.
You will be shown how to do this in Part Two of this guide.
Continued
Please note: Model F1PI241ENau used in this setup guide. Same steps apply for model F1PI241EGau

Now that you have successfully fi ltered all your standard
phones and/or fax machines you can now set up your VoIP
connection.
3 Connect your telephone into the “Phone 1” socket on the
back of the modem using your existing phone cable.
Next, take another phone cable (not supplied), plug one
end into the “PSTN Failover” port on the back of the
modem and the other into the “Phone” socket in the
line fi lter.
Having the unit set up in this manner will enable you to
make outgoing VoIP calls and also allow you to receive
calls on either your VoIP number or your standard
telephone number.
Trouble Shooting
If you cannot access the Internet:
1 Open your internet browser and type in http://10.1.1.1 into the
Address Bar
2 Log into the modem with the current password (default password
= admin) and click LOGIN
Under ADSL Parameter Setting
1 Add your current username and password
*If you would like to disable wireless, remove the tick next to Enable
Wireless Radio - (applies to Belkin ADSL Wireless Modem only.)
2 Click Save Settings
If you cannot make VoIP calls:
Firstly, ensure your ADSL service is working correctly.
Under VoIP
Parameter Setting
1 On the same
screen, place a
tick next to VoIP
Account 1
2 Type in your VoIP
Phone Number and
Password (your
VoIP password
differs to your
Internet password)
3 Select your State
4 Click Save Settings
NOTE: Your Username, Password and VoIP settings can be found in
your Activation Email or Welcome Letter.
The ADSL connection in your home shares the same
telephone line as your normal phone service.
This step shows you how to place a line fi lter on any
additional devices in your house. If you do not have any
other phones or fax machines around the house please see
Step 2.
1 Unplug your telephone or fax machine from the wall
socket. Plug the line fi lter into the wall socket. Connect
the telephone line running from your telephone or fax
machine into the “Phone” socket on the line fi lter.
Part Two - Setting up additional phones in your
house and setting up a VoIP connection
Follow this step if you do not have VoIP and have a phone
or fax situated near your modem. If you have VoIP, please
see Step 3.
2 In the previous steps (Page 1 - Setting up ADSL) you
utilised the supplied fi lter for use with the ADSL
modem. This line fi lter should also be used if you have
a standard phone located near your modem.
Connect the telephone line running from your
telephone into the “Phone” socket on the line fi lter.
F
E
E
modem and the other into the “Phone” socket in the
modem and the other into the “Phone” socket in the
F
modem and the other into the “Phone” socket in the
E