Belkin F1PI242ENAU User manual

Quick Installation Guide
Your step by step installation guide

Step 1 - Hardware Connections
Modem-Router
computer
A
Place the Modem-Router next to the computer.
B
Find your new networking cable (it came in the box with
your Modem-Router) and connect it to a yellow port on
the back of the Router (Labelled LAN1 to LAN4).
C
Find your new telephone cable (it came in the box with
your Modem-Router) and connect it to the grey port on
the back of the Modem-Router (Labelled ADSL line).
Connect the other end to your telephone socket
on the wall.
Setup Overview
Quick Installation Guide
1
Step Hardware Connections:
Use the instructions in
this guide to connect your
Modem-Router.
2
Step Automatic Configuration:
Insert the CD into your
computer and follow the
on-screen instructions.
Please ensure you have your
broadband/VoIP username
and password available before
proceeding.
3
Step Connect other Computers:
The CD can assist you in
connecting other computers
to your new network.
(Optional)

Belkin and iiNet provides free technical support via phone and
the Web. However, we encourage you to attempt (or retry) Steps 1
and 2 before contacting Support. The Setup Assistant has built-in
intelligence to help diagnose and fix common problems. If you’re
still having trouble, contact Belkin Support.
If you’re still having trouble, please contact contact iiNet or
Belkin support for assistance.
iiNet iiNet Support
13 22 58
[e-mail]
iiNet Business Support
13 24 49
[e-mail]
Belkin http://www.belkin.com/anz
Click on Support Centre
1800 235 546
Available Monday–Friday 08:00–20:00
Sydney time zone, closed public holidays
Step 1 - Hardware Connections (continued)
E
Wait 20 seconds for the Modem-Router to start up.
Look at the display on the front of the Router.
Make sure the “Power” and “Wired” icons are lit up
in blue. If they are not, recheck your connections.
Step 2 – Setup Assistant
Support
F1PI242ENau
GD2202
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
D
Plug the Modem-Router’s power supply into the black
port on the back (Labelled PWR).
Plug the other end into the wall outlet.
Insert the CD into your computer.
The Setup Assistant will automatically appear on your
computer’s screen.
Follow the instructions there and you are finished!

13.2v/1200MA
Connects to
ADSL Internet
Connects to Power
Connects to Desktop PC’s, Laptops and
Printers with Ethernet Ports
Connects to Phones
connecting via VoIP/iiTalk
Connects to PSTN
Land Line (VoIP failover)
Hardware Connection Guide