Belkin OmniView PRO2 Rack User manual

Quick Installation Guide
NL
ES
IT
UK
FR
DE
Start Here
OmniView®
PRO2 KVM Switch
F1DA104Zea
F1DA108Zea
F1DA116Zea

Introduction 2
USB or PS/2 Keyboard USB or PS/2 Mouse Belkin Dual-Port
Micro-Cable Kit
[Belkin Part No. F1D9400-XX
(PS/2-style) or F1D9401-XX
(USB-style)]
OmniView PRO2
KVM Switch
(included)
Rack-Mount
Brackets with
Screws (included)
12V/1A Power
Supply (included)
VGA Monitor
To install the Switch, you will need the following:
Introduction
This Quick Installation Guide will guide you through the steps needed
to install the OmniView PRO2 KVM Switch (the Switch). If you have any
problems during this installation, please refer to the User Manual.

Mount the Switch 4
1.3 Mount the Switch to the rack rails. (Refer to diagram below.)
Your Switch is now mounted securely to the rack and you are ready to
connect the console.

2.4 Attach the power supply to the power jack on the back of the Switch.
(Refer to diagram below.)
2.5 Power up the connected servers. Check for keyboard, video, and mouse
function on each port.
To install your Switch in a daisy-chain configuration, please refer to the
User Manual.
Connect the Console 7

© 2007 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
P75458ea
OmniView®
PRO2 KVM Switch
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk
Netherlands
[phone]
[phone] fax
Belkin Sweden
Knarrarnäsgatan 7
164 40 Kista
Sweden
[phone]
[phone] fax
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt
France
[phone]
[phone] fax
Belkin Iberia
Avda. Cerro del Aguila 3
28700 San Sebastián
de los Reyes
Spain
[phone]
[phone] fax
Belkin Nordics & Baltics
Roskildevej 522
2605 Brøndby
Denmark
[phone]
[phone] fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich
Germany
[phone]
[phone] fax
Belkin Italy & Greece
Via Carducci, 7
Milano 20123
Italy
[phone]
[phone] fax
Belkin Ltd.
Al Thuraya Tower 1,
Office Suite 201
Dubai Internet City,
Dubai, UAE
[phone]
[phone] fax

Guide d’installation rapide
NL
ES
IT
UK
FR
DE
Commencez ici
Switch KVM
PRO2 OmniView®
F1DA104Zea
F1DA108Zea
F1DA116Zea

Introduction 2
Clavier USB ou PS/2 Souris USB ou PS/2 Kit de microcâblage
double port Belkin
[Référence Belkin F1D9400-XX
(PS/2) ou F1D9401-XX (USB)]
Switch KVM
OmniView PRO2
(fourni)
Dispositif de
montage en baie
et vis (fourni)
Adaptateur
secteur 12 V/1 A
(fourni)
Moniteur VGA
Pour installer le switch, vous aurez besoin
du matériel suivant :
Introduction
Ce guide d’installation rapide vous guidera à travers les étapes
nécessaires à l’installation du Switch KVM PRO2 OmniView (le switch).
Si vous rencontrez des problèmes lors de l’installation, reportez-vous au
manuel de l’utilisateur.