Bend-Pak XPR-12FDL User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
XPR-12FDL
PRODUCT SKU
5175403
DRAWING Nº
5260568
CATEGORY
Two Post Li
REV
Version X
DATE
02.15.2022

DIMENSIONS ARE IN MM
☺
3
1
2
4
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5245137 XPR-12FDL LIFT SUPERSTRUCTURE 1 AE
2 5250263 XPR-12FDL PARTS BOX 1 F
3 5215376 XPR-12FD TOP EQUALIZER PULLEY PLATE ASSEMBLY 2 G
4 5215283 XPR-12CL/FDL TRIPLE TELESCOPING ARM ASSEMBLY 4 K
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
V ADDED 5905775 08/09/2021 TM 01321
W
REPLACED LABELS WITH COLORS &
GRAPHICS NOTE, UPDATED BOM REVISION
12/21/2021 CA 01371
X
OVERALL WIDTH WAS 154.5" NOW 155",
UPDATED BOM REVISION
02/10/2022 CA 01392
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
X
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5260568
XPR-12FDL
PRODUCTION LIFT VER E
12/15/2015
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
OR 02/14/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.

3676.00mm
144.724in
3029.00mm
119.252in
[13.016-82.016"]
330.6-2083.2mm
WITH 63mm [2.5"] &
125mm [5"] ADAPTER
[5.618-74.618"]
142.7-1895.1mm
3937.00mm
155.000in
2658.20mm
DRIVE THRU
104.654in
3613.00mm
142.244in
[29.724-57.992in]
755-1473mm
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
X
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260568
XPR-12FDL
PRODUCTION LIFT VER E
1:45
SCALE:

DIMENSIONS ARE IN MM
☺
1
3
2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AC UPDATED BOM REVISION 03/09/2020 TM 01107
AD UPDATED BOM REVISION 12/21/2021 CA 01371
AE UPDATED BOM REVISION 02/10/2022 CA 01392
NEXT ASSEMBLY
5260568
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5215356 XPR-12FDL POWER SIDE POST ASSEMBLY 1 AD
2 5215233 XPR-12FDL OFF SIDE POST ASSEMBLY 1 AC
3 5210047 XPR-12FD GROUND PLATE 1 D
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AE
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5245137
XPR-12FDL LIFT
SUPERSTRUCTURE
02/12/2010
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 02/14/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
A
1
7
8
9
10
11
4
DETAIL A
SCALE 1 : 2
5
2
3
6
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AB UPDATED BOM REVISION 05/15/2019 TS 01086
AC UPDATED BOM REVISION 03/09/2020 TM 01107
AD UPDATED BOM REVISION 12/21/2021 CA 01371
NEXT ASSEMBLY
5245137
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600382 XPR-12FDL POWER SIDE POST WELDMENT 1 M
2 5565350
D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE
SPACER
2 C
3 5575112 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE 2 C
4 5575113 D2/XPR-12/15/18 SHEAVE ASSEMBLY 2 E
5 5530756 HHB M6 x 1.0 x 25mm 2 -
6 5535357 NUT M6 x 1.0 NL 2 -
7 5530030 HHB M6 x 1 x 8 2 -
8 5620142
D2-12/15, XPR-12C/12FD/15/18C CABLE SHEAVE
PIN WELDMENT
2 A
9 5215290 XPR-12FD LIFT HEAD ASSEMBLY 1 T
10 5502305 CYLINDER ASSEMBLY Ø2.5 x 69 1 J
11 5701115 CYLINDER CLAMP ASSY-74-79 1 -
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AD
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215356
XPR-12FDL POWER SIDE
POST ASSEMBLY
11/19/2009
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 12/28/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
A
1
7
4
10
9
11
8
DETAIL A
SCALE 1 : 2
5
3
6
2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AA UPDATED BOM REVISION 05/21/2019 TS 01086
AB UPDATED BOM REVISION 03/06/2020 TM 01107
AC UPDATED BOM REVISION 12/21/2021 CA 01371
NEXT ASSEMBLY
5245137
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600377 XPR-12FD OFF SIDE POST WELDMENT 1 K
2 5565350
D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE
SPACER
2 C
3 5575112 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE 2 C
4 5575113 D2/XPR-12/15/18 SHEAVE ASSEMBLY 2 E
5 5530756 HHB M6 x 1.0 x 25mm 2 -
6 5535357 NUT M6 x 1.0 NL 2 -
7 5530030 HHB M6 x 1 x 8 2 -
8 5620142
D2-12/15, XPR-12C/12FD/15/18C CABLE SHEAVE
PIN WELDMENT
2 A
9 5215290 XPR-12FD LIFT HEAD ASSEMBLY 1 T
10 5502305 CYLINDER ASSEMBLY Ø2.5 x 69 1 J
11 5701115 CYLINDER CLAMP ASSY-74-79 1 -
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AC
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215233
XPR-12FDL OFF SIDE
POST ASSEMBLY
11/19/2009
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 12/28/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
1
2
3
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H UPDATED BOM REVISION 05/30/2018 TM 00953
J UPDATED BOM REVISION 08/12/2019 CA 01117
K UPDAT ED BOM REVISION 80/23/2019 TM 01123
NEXT ASSEMBLY
5260563
5260567
5260568
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600993 XPR-12CL/FDL TRIPLE TELESCOPING ARM WELDMENT 1 K
2 5545341 WASHER M10 x Ø20 FLAT 3 -
3 5545200 WASHER M10 x Ø18 SL 3 -
4 5530302 HHB M10 x 1.5 x 40 FULLY THREAD 3 -
WHERE USED
XPR-12FDL
XPR-12CL
XPR-12CL-192
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215283
XPR-12CL/FDL TRIPLE
TELESCOPING ARM
ASSEMBLY
06/23/2015
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 08/26/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
NEXT ASSEMBLY
5260568
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5174114 XPR-12FD PARTS BAG 1 L
2 5540281 C RING Ø38mm OD 5103-150 4 -
3 5210196 D2/XPR POWER SIDE INCLINED SAFETY ASSEMBLY 1 C
4 5210010 D2/XPR OFF SIDE SAFETY WELDMENT 1 F
5 5715003 POWER UNIT VIBRATION DAMPENER 1 B
6 5215701 ROUND LIFT PAD ADAPTER ASSEMBLY 4 D
7 5736605 D2-12C/XPR-12 BOLT ON ARM RESTRAINT GEAR 4 E
8 5716173 D2-8/12/15, GP/XPR POWER SIDE PLASTIC SAFETY COVER 1 B
9 5716174 D2-8/12/15, GP/XPR OFF SIDE PLASTIC SAFETY COVER 1 B
10 5746192 ARM ADAPTER, MEDIUM 4 E
11 5746193 ARM ADAPTER, LONG 4 D
12 5505346 D2/XPR-12C/FD LIFT HEAD PIN WELDMENT 4 B
13 5595124 Ø2.4 x 7400mm SAFETY CABLE 1 C
14 5570118 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 1562mm DS 2 D
15 5595070 CABLE ASSEMBLY Ø12 x 10800mm ST 2 D
16 5570126 HYDRAULIC HOSE ASSEMBLY Ø10 x 3150mm DS 1 D
17 5746166 DOUBLE THREADED ROD M10 x 1.5 x 295 2 B
18 5530308 AB 3/4" x 7" 14 -
19 5215702 CRADLE LIFT PAD LARGE ADAPTER ASSEMBLY 4 E
20 5900952 XPR-12FDL INSTALLATION MANUAL 1 -
21 5701660 10AP/D2-12/15/XPR HEIGHT ADAPTER HOLDER 2 B
22 5701661 D2/XPR-12/15/18 FOOT GUARD, R.H. 2 A
23 5701662 D2/XPR-12/15/18 FOOT GUARD, L.H. 2 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D
ADDED 5701660, 570661 AND 5701662,
REMOVED 5535011 AND 5545345, UPDATED
BOM REVISION
03/10/2020 TM 01107
E UPDATED BOM REVISION 10/05/2020 TM 01215
F UPDATED BOM REVISION 06/22/2021 TM 01310
WHERE USED
XPR-12FDL
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250263
XPR-12FDL PARTS BOX
10/18/2018
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 07/01/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

1
5
7
6
13
15
14
16
11
4
10
8
12
2
17
18
20
19
9
3
21
23
22
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5250263
XPR-12FDL PARTS BOX
1:25
SCALE:

DIMENSIONS ARE IN MM
☺
7
6
5
4
9
8
14
15
16
2
1
13
11
12
10
17
18
19
20
24
23
22
21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
J
UPDATE TITLE TO REFLECT WEHRE USED, UPDATED
BOM REVISION AND NEXT ASSEMBLY
05/31/2018 TM 00953
K
ADDED 5535357, 5530093, 5545005, AND
5580012
03/06/2020 TM 01107
L
REPLACED 5505001 WITH 5505113, REMOVED (2)
5540075
10/05/2020 TM 01215
NEXT ASSEMBLY
5250263
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5505113 2 POST SAFETY CLEVIS PIN 2 -
2 5715196
D2/XPR POLYETHYLENE COVER BLOCK 105 x 80
2 D
3 5550183 FTG ELB -06 JIC -06L ORB 1 -
4 5505350 MODEL#211 HAIR PIN/ LARGE 2 -
5 5530261 PHPS M6 x 1 x 10 4 -
6 5545347 WASHER, M12 FLAT WASHER 2 -
7 5535354 NUT M12 x1.75 2 -
8 5535001 NUT M8 x 1.25 NL 4 -
9 5530010 HHB M8 x 1.25 x 25 4 -
10 5545200 WASHER M10 x Ø18 SL 4 -
11 5535998 NUT M10 x 1.5 4 -
12 5530760 HHB M10 x 1.5 x 38 4 -
13 5540075 R.H., 2.5 WIRE DIA., Ø20.5 x 75 LG 2 -
14 5550147 FTG NPL -04 JIC x -04 NPT 2 -
15 5550178 FTG TEE -04JIC -04JIC -06NPT 1 -
16 5550109 FTG ELB -06 JIC x -06 F NPT 1 -
17 5545535 C WASHER SHIM FOR LIFTS 20 -
18 5545341 WASHER M10 x Ø20 FLAT 4 -
19 5535013 NUT M10 x 1.5 NL 4 -
20 5505031 ROTOR CLIP 12mm SS 1 -
21 5530093 HHB M6 x 1 x 20 4 -
22 5545005 M6 FLAT WASHER 8 -
23 5535357 NUT M6 x 1.0 NL 4 -
24 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
L
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174114
XPR-12FD PARTS BAG
02/10/2010
DO NOT SCALE DRAWING
1:15
SCALE:
THIRD ANGLE PROJECTION
OR 10/15/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
1
7
8
3
5
6
9
2
4
100.0
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
Q UPDATED BOM REVISION 03/29/2018 TM 00930
R UPDATED BOM REVISION 03/06/2020 TM 01107
T
ADDED GUIDE BLOCK ORIENTATION NOTE
(PAGE2), UPDATED BOM REVISION
12/21/2021 CA 01371
NEXT ASSEMBLY
5215233
5215356
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600393 XPR-12FD LIFT HEAD WELDMENT 1 J
2 5716001 2 POST GUIDE BLOCK 8 H
3 5746099
D2/XPR-12C/FD/15/18C Ø25mm LONG GEAR
SHAFT
2 E
4 5701052 D2/GP/M6K/XPR ARM INTERNAL GEAR STOP 2 F
5 5540130 D2/XPR-12C/FD/15/18C LIFT HEAD SPRING 2 A
6 5580219 KEYRING 56mm x 3mm 2 -
7 5505106 SPRING PIN M6 x 50 2 -
8 5540006 SNAP RING TRUARC 5103-100 2 -
9 5930184 D2/XPR-12/15/18 LIFT HEAD GUSSET COVER 1 C
WHERE USED
XPR-12FDL
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
T
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215290
XPR-12FD LIFT HEAD
ASSEMBLY
11/27/2009
DO NOT SCALE DRAWING
1:12
SCALE:
THIRD ANGLE PROJECTION
OR 12/28/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
3
4
1
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E UPDATED BOM REVISION 05/21/2012 TM 00517
F
F-001
F-002
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
08/22/2012
07/02/2013
12/16/2015
TM
TM
TM
00542
00605
00738
G UPDATED BOM REVISION 11/15/2017 TM 00900
NEXT ASSEMBLY
5260568
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600383 XPR-12FD TOP EQUALIZER PULLEY PLATE WELDMENT 1 C
2 5575113 D2/XPR-12/15/18 SHEAVE ASSEMBLY 1 E
3 5620142
D2-12/15, XPR-12C/12FD/15/18C CABLE SHEAVE PIN
WELDMENT
1 A
4 5530030 HHB M6 x 1 x 8 1 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215376
XPR-12FD TOP
EQUALIZER PULLEY PLATE
ASSEMBLY
04/22/2010
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
AW
12/20/2017
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
2
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
B-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
04/22/2016
07/05/2017
CA
TM
00750
00849
C UPDATED BOM REVISION 02/09/2018 TS 00922
D UPDATED BOM REVISION 05/31/2018 TM 00953
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600999 ROUND LIFT PAD WELDMENT 1 C
2 5715017 ROUND LIFT PAD ADAPTER POLYURETHANE PAD 1 E
NEXT ASSEMBLY
5250254
5250263
5250264
5250266
5250267
5250268
5250269
5250314
5250315
WHERE USED
D2-12C
D2-15C
XPR-12 SERIES
XPR-15 SERIES
XPR-18 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215701
ROUND LIFT PAD
ADAPTER ASSEMBLY
06/26/2015
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 06/18/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
3
2
1
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
04/22/2016
07/05/2017
CA
TM
00750
00849
D UPDATED BOM REVISION 02/26/2018 TM 00930
E UPDATED BOM REVISION 05/31/2018 TM 00953
NEXT ASSEMBLY
5250254
5250263
5250264
5250266
5250267
5250268
5250269
5250314
5250315
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601000 CRADLE LIFT PAD WELDMENT 1 C
2 5715020 CRADLE LIFT PAD LARGE POLYURETHANE PAD 1 C
3 5530022 BPHS M6 x 1 x 20 ZPL 4 --
4 5535357 NUT M6 x 1.0 NL 4 --
WHERE USED
D2-12/15 SERIES
XPR-12FDL SERIES
XPR-12CL SERIES
XPR-15 SERIES
XPR-18 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215702
CRADLE LIFT PAD LARGE
ADAPTER ASSEMBLY
06/24/2015
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 06/18/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

1562
1 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
B-001
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLY
02/15/2012
07/02/2013
TM
TM
00490
00605
C
C-001
REPLACED 5570110 WITH 5570129
UPDATED NEXT ASSEMBLY
12/01/2014
12/15/2015
TM
TM
00673
00738
D UPDATED TITLE TO REFLECT STANDARD 03/09/2020 TM 01107
NEXT ASSEMBLY
5250263
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 1496mm* -
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 2 -
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570118
HYDRAULIC HOSE ASSEMBLY
Ø6.35 x 1562mm DS
08/26/2009
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 04/10/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

3150
21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
UPDATED NEXT ASSEMBLY AND ADDED FITTING
CALL OUT IN TITLE
01/11/2010 TM 00293
C
C-001
C-002
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
02/15/2012
07/02/2013
12/15/2015
TM
TM
TM
00490
00605
00738
D UPDATED TITLE TO REFLECT STANDARD 03/09/2020 TM 01107
NEXT ASSEMBLY
5250263
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570116 Ø10 ID HYDRAULIC HOSE 3086mm* -
2 5550336 FTG NPL -06 CRIMP x -06 JIC 2 -
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJ
5570126
HYDRAULIC HOSE ASSEMBLY
Ø10 x 3150mm DS
10/15/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR
04/10/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

10800
23.0
10745
29.5
55.0
3 1 2
5
4
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 10718mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
NEXT ASSEMBLY
5250263
REVISION
REV. DESCRIPTION DATE EDITED BY ECO#
OBSO REPLACED BY 5595534 07/28/2009 AC 00249
B
B-001
B-002
UNOBSOLETE DUE TO REUSE IN XPR-12FD,
DERIVED FROM 801067
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
01/26/2010
07/02/2013
12/15/2015
TM
TM
TM
00293
00605
00738
C UPDATED BOM REVISION 11/03/2017 TM 00900
D
UPDATED TITLE TO REFLECT STANDARD,
ADDED 5535011 AND 5545345
03/09/2020 TM 01107
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5595070
CABLE ASSEMBLY
Ø12 x 10800mm ST
10/01/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 04/09/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.

7400
5
15
21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 800721 09/15/2009 TM 00293
B
B-001
B-002
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
02/15/2012
07/02/2013
12/15/2015
TM
TM
TM
00490
00605
00738
C UPDATED TITLE TO REFLECT STANDARD 03/09/2020 TM 01107
NEXT ASSEMBLY
5250263
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5595682 CABLE SAFETY Ø2.4mm 7440mm* --
2 5580210 Ø2.4mm OVAL CABLE CRIMP 1 --
WHERE USED
XPR-12FDL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5595124
Ø2.4 x 7400mm
SAFETY CABLE
09/15/2009
DO NOT SCALE DRAWING
1:1
SCALE:
THIRD ANGLE PROJECTION
OR 04/09/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
ASSEMBLE ITEMS AS SHOWN 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.

A A
7
6
8
9
4
3
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
SECTION A-A
1
5
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H
(PAGE 2) WAS 236 NOW 246, WAS 152 NOW
145, WAS 76 NOW 73, WAS 1604 NOW 1560
10/22/2018 TM 01011
J UPDATED BOM REVISION 05/21/2019 TS 01086
K
REMOVED 5730075, ADDED CRITICAL
DIMENSIONS AND GLOSS NOTE TO PAINT,
UPDATED BOM REVISION
03/06/2020 TM 01107
NEXT ASSEMBLY
5215233
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5620372 XPR-12FD OFF SIDE BASE PLATE WELDMENT 1 C
2 5701301 XPR-12FDL OFF SIDE BARE POST 1 D
3 5736635 XPR SAFETY RELEASE PLATE 2 D
4 5735700 10AP/XPR TOP TROUGH SUPPORT 2 D
5 5701457 10AP/XPR TOP TROUGH TIE PLATE 1 D
6 5730270 XPR-12/15/18 POST GUSSET 2 B
7 5735228 XPR STIFFENING PLATE 1 B
8 5210004 GP/PCL/XPR SAFETY SHEAVE CLAMP 1 C
9 5760001 SAFETY COVER BLOCK 2 C
WHERE USED
XPR-12FDL
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5600377
XPR-12FD OFF SIDE POST
WELDMENT
11/18/2009
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
OR
04/09/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 2.
REMOVE ALL WELD SPLATTER 3.
DIMENSIONS SHOWN ARE AFTER PAINTING 4.
PAINT BENDPAK GRAY (RAL-7024) 20% GLOSS 5.
NOTE: UNLESS OTHERWISE SPECIFIED.