BenQ Portable Entertainment Series User manual

Digital Projector
Quick Start Guide
Portable Entertainment Series | GS2
V2.01
Projecteur numérique
Guide de démarrage rapide
Gamme de divertissement portable | GS2

2
Package Contents
GS2 Projector Adapter Power Cord Wireless Dongle
(WDR02U)
Remote Control
(with One CR2032
Battery)
Carry Bag Quick Start Guide Regulatory Statements Warranty Card
Quick Start Guide
• Lamp life results will vary depending on environmental conditions and usage. Actual product’s features and specications are
subject to change without notice.
• Some of the accessories may vary from region to region.
• The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.

3
Product Overview
Tripod
screwhole
Speaker
Power
adapter port
Power
button
LED 1 LED 3
LED 2
Ambient light
sensor and
rear IR sensor
OK button
Menu button
Home button
Direction
buttons
Back
button
Wireless
dongle port 3.5"audio
output jack USB-C™ port
HDMI
1.4a port USB 2.0 port
Factory
reset button
Control
panel
Auto blank
sensor IO Cover
Auto focus
camera Front IR
sensor
Projection
lens

4
LED Indicators
Scenario Status LED 1 LED 2 LED 3
LED Behavior Schema LED Behavior Schema LED Behavior Schema
Charging with
Adapter
Battery charging in progress Green -
breathing
Green -
breathing
Green-
breathing
Battery charging complete Green - solid Green - solid Green - solid
Battery Mode
Battery capacity < 5% N/A N/A N/A
Battery capacity < 16% Red - solid N/A N/A
Battery capacity = 16 - 33% Green - solid N/A N/A
Battery capacity = 33 - 66% Green - solid Green - solid N/A
Battery capacity = 66 - 100% Green - solid Green - solid Green - solid
Bluetooth
Speaker Mode
Ready to pair / Pairing Green - ashing N/A Green -
ashing
Pairing successful Depends on power status
System
Update
System update in progress Green - ashing Green- ashing Green- ashing
System update has failed Red - ashing N/A N/A
Error
LED error Red - ashing Green- ashing N/A
Fan error Red - ashing Green - ashing Green- ashing
Optical engine temperature
error Red - solid Green- ashing N/A
Battery temperature error Red - solid Green- ashing Green- ashing
Driver board error Red - solid N/A Green- ashing

5
Installing the Wireless Dongle
45 6
45 6
45 6
45 6

6
Powering / Charging the Projector
• Keep the battery charged to at least 60% (3 bars on the battery status icon) to ensure a successful OTA update.
• See "LED Indicators" on page 4 for charging behavior of the LED Indicator.
• Once the projector is fully charged the adapter can be disconnected.
• For initial power up, press and hold the Power Button for 3 seconds.
• When the projector is on, press the Power Button to enter power-saving mode.
• When the projector is on, press and hold the Power Button for 3 seconds to turn off the projector.
• For AC/DC adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible.
3”
45 6
45 6
45 6
45 6

7
Adjusting the Projector Angle
15°
max
45 6
45 6
45 6

8
Adjusting the Focus
45 6
45 6
45 6
Before you can begin to use the remote control, you must rst remove the clear plastic battery sticker between the battery and the
contact on the remote control.

9
Remote Control
Power
Arrow keys
Volume keys
Home
Back
Menu
OK button
Focus/Mouse Cursor
Turns the projector
on and off (after
initial power up
from the keypad)
Moves the selection
Opens the projector‘s
Settings menu
Enters the Home
menu of the BenQ
Launcher Adjusts the projector’s
volume
Returns to the
previous menu
Conrms the selection
Short press to start auto
focus; long press to enable
the mouse cursor

10
Connecting Devices
Wireless Connection:
Laptop/PC
Bluetooth
Speakers
Wireless Dongle
DWR02U
Devices with USB-C™ DisplayPort
Tablet Smartphone Wireless AP
Speakers
Laptop/PC
A/V Devices
Smartphone or Tablet